AUDIOLINE CLD60 Bedienungsanleitung

CLD60

Telephone with Caller Display

User guide

TABLE OF CONTENTS AUDIOLINE CLD60

AUDIOLINE CLD 60

User guide

TABLE OF CONTENTS

Installation .................. 2Caller Display ................. 11

Function ................... 2Explanation ................. 11

Assembley instructions ....... 3Call Indications .............. 11

Parts List/Battery ............ 3 To View the new call information. 12

Assembly .................. 3Erase phone number ...........13

Table/Wall Mounting ........ 4Memory Full ................13

Wall Installation/Display ...... 5Autodial ....................14

Set Date and Time ........... 6

Set Language ............... 6Telephone book ................ 14

Explanation of Phone Book .....14

The telephone ................ 7Text input ...................15

To Call/Call Timer ........... 7Store Phone Number/Name .....16

Last Number Redial .......... 7Erase Number/Name ..........17

Volume control ............. 8Dialling a Phone Book number ..17

Mute button .................8

Pause function ...............8 Special functions .............. 18

Ringing signal .............. 8Least Cost Routing(LCR) ......18

Network Feature buttons .......9 E-mail indicator .............. 20

Call Waiting/Call Forward .....9 Message waiting ............. 20

Call Forward continued ........10

Trouble shooting .............. 21

If the phone doesn't work ....... 21

Other Information ............ 22

Guarantee ................... 23

ERASE

DIAL

AUDIOLINE CLD60 INSTALLATION

FUNCTIONS

1Erase button 10 Switch for ringing signal

2Dial button 11 Dial button, 0-9, *, #

3Memory button 12 Network feature buttons

4Store button 13 Scrolling button UP

5Mute button 14 Scrolling button DOWN

6Recall button 15 Indicator

7Outlet for handset cord (on the side) 16 Display

8Redial/Pause button 17 Outlet for line cord (at rear)

9Outlet for handset cord (on handset) 18 Switch for handset volume

INSTALLATION AUDIOLINE CLD60

ASSEMBLY INSTRUCTIONS

PARTS LIST

1 - CLD60 Telephone

1 - Telephone Handset

1 - Line cord

1 - 3 x 1.5volt AA Batteries (supplied)

BATTERY

The Caller Display and memory functions need 3 x 1.5 volt AA batteries to function.

PRemove the line cord before you change the battery.

PTo install the batteries unscrew and remove the battery cover from the battery holder

(on the base of the telephone) and insert the new batteries ensuring correct polarity.

PIndication of flat batteries will be seen in the telephone display (see diagram page

5). Remove the old batteries, wait a couple of minutes to enable the Caller Display

to reset correctly, and then insert the new batteries. Observing correct polarity.

PReconnect the line cord.

ASSEMBLY

PPlug the Line cord into the telephone (17 on the diagram on page 2) by inserting the

plug until you hear a click.

PPlug the Handset into the telephone (7 on the diagram on page 2) again listen for the

click.

PTo remove either of the plugs depress the plastic tab on the plug and withdraw.

Do not position the telephone in direct sunlight. The rubber feet on the base of the

telephone can leave marks on sensitive surfaces.

AUDIOLINE CLD60 INSTALLATION

SLIDE SUPPORT

On the base of the CLD60 is a “slide support”. This is used to position the phone

correctly for use when desk/wall mounting. Please refer to the diagram below for correct

positioning.

DESKTOP USE

When this “slide support” is slid onto the base of the phone from the top downwards the

CLD60 is ready for desk top use. See diagram below.

WALL MOUNTING

When this “slide support” is slid ontothe base of the phone from the bottom upwards, the

CLD60 is ready for wall mounting. See diagram below and Page 4.

Desktop position Wall mount position

INSTALLATION AUDIOLINE CLD60

WALL INSTALLATION

To install the telephone on the wall:

PThe CLD60 will fit directly onto the standard Telstra wall plate, or

PUse the slide support as a template to mark the position of the 2 screw holes for

attaching directly to the wall. The distance between the two holes will be 82mm.

PScrew in the mounting screws until there is a 3mm gap between the wall and the screw

head.

PFasten the slide support to the telephone in the “wall mount” position and hook the

telephone onto the screws and press down into place.

PConnect the line cord to the wall socket - The phone is now ready to program.

THE DISPLAY

With the Handset in place the telephone is on “Standby”.

The display (16 in the diagram on page 2) has 15 alpha-numeric characters on the top line

for the display of text messages, 13 segments on the second line to indicate the Caller

Display phone number, and on the 3rd line, will show the new calls received, flashing

envelope, Caller Display memory store number, the time, the date, and the battery low

indicator. See diagram below.

Presentation of text message

Caller Display

New Caller Display Low battery

Calls Memory Time Date

AUDIOLINE CLD60 PROGRAMMING

SET DATE AND TIME

To set the correct date and time on the display do the following:

PPress the [STORE] button (4 on the diagram on page 2) for 2 seconds and release.

The display will show "LANGUAGE".

PPress the UP Arrow until the display shows "SET TIME".

PPress [ERASE] button. The hours will flash on the display. Press the UP or

DOWN arrows to step to the correct hour. Press [ERASE] button to store the

hours.

PThe minutes on the display now flash. Use the UP and DOWN arrows

to set the minutes. Press [ERASE] button to store the minutes.

PThe days on the display now flash. Use the UP and DOWN arrows to

set the day. Press [ERASE] to store the day.

PThe month on the display will now flash. Press the UP and DOWN

arrows to set the month. Press the [DIAL] button (2 on the diagram on Page 2) to store

the month and return to standby.

SET LANGUAGE

The telephone display will show text in a choice of languages. The language choice is:

Swedish, English, Finish, Danish, Norwegian, Turkish, German, Dutch, Portuguese,

Italian, Spanish and French. To set your chosen language do the following:

Press the [STORE] button down for 2 seconds, release the button.

The display will show "LANGUAGE".

Press [ERASE] button.

PPress the UP or DOWN arrows to choose your language.

PPress the [DIAL] button to store the setting and return to standby.

THE TELEPHONE AUDIOLINE CLD60

MAKE A CALL

#Lift handset and wait for Dial Tone.

#Dial the number.

#Finish the call by replacing the handset.

CALL TIMER

Outgoing Calls

The telephone has a call timer function that will show the length of a call on the display.

The example in the diagram below shows a call of 8 minutes 46 seconds duration.

Incoming Calls

On an incoming call the timer will show after about 30 seconds into the call and indicate

the total call time when the call is completed.

LAST NUMBER REDIAL

If the number you called is busy or if you want to call the previous number again, simply;

PLift the handset and wait for Dial Tone.

PPress the [REDIAL/II]button (8 on the diagram on page 2) . The phone will call the last

number you dialled.

AUDIOLINE CLD60 THE TELEPHONE

VOLUME CONTROL

The sound level in the handset is adjusted with the switch on the side of the handset. The

sound level changes between HIgh and LOw (18 on the diagram on page 2).

MUTE BUTTON

The [MUTE]button (5 on the diagram on Page 2) will cut off the handset microphone

when pressed. This will allow you to speak privately to a third party while waiting on

your call. Push the [MUTE]button again to switch the handset microphone back on.

The word “MUTE” shows in the display when the [MUTE]button is pressed.

PAUSE FUNCTION

When you make a call with a number stored in the telephones [MEMORY](3 on the

diagram on page 2) and you need a pause during the dialling , eg., on an international or

acall through a switchboard, you can insert a pause with the [REDIAL/II]button (8 on

diagram on page 2).

The display will show a “P” indicating a dialling pause.

RING SIGNAL

On the right hand side of the telephone (10 on the diagram on page 2) there is a switch

that allows you to change the volume of the ringing signal. The switch has three positions;

Off, Low, and High. The symbol indicates the ring signal is turned off.

THE TELEPHONE AUDIOLINE CLD60

NETWORK FEATURE BUTTONS

The buttons CW, CALL FWD 1 and 2 above the dialling buttons (12 on the diagram on

page 2), are used for easy access to the frequently used Telstra network services.

CALL WAITING (CW)

To switch between callers when you hear the call waiting tones simply press the [CW]

button. The first caller is put on hold and you can talk to the second caller. Each

subsequent press of the [CW] button allows you to toggle between the callers.

When your conversation is finished hang up by placing the handset on the cradle.

CALL FORWARD (CALL FWD)

Call Forward or Call Diversion is a network feature that allows your calls to be

forwarded to another number under certain conditions. For example, if your telephone is

not answered or you are going to be out, you can program the CLD 60 to forward your

calls to the number of your choice.

CALL FWD 1

Immediate

When leaving home you can program the CLD 60 to forward all your calls immediately

to another number, for example your mobile phone:

#Lift the handset

#Press the [CALL FWD 1] button

#Dial the forward number, eg, your mobile or office number

#Press the [#] button to store

#Listen for the facility tone and replace the handset.

Inhaltsverzeichnis

Andere AUDIOLINE Telefon Handbücher

AUDIOLINE

AUDIOLINE Tangent 502 Bedienungsanleitung

AUDIOLINE

AUDIOLINE TAB968 Bedienungsanleitung

AUDIOLINE

AUDIOLINE SYMPHONY Bedienungsanleitung

AUDIOLINE

AUDIOLINE TEL 8 PLUS Bedienungsanleitung

AUDIOLINE

AUDIOLINE TEL 30B Bedienungsanleitung

AUDIOLINE

AUDIOLINE TEL49 CLIP Bedienungsanleitung

AUDIOLINE

AUDIOLINE 22HS Bedienungsanleitung

AUDIOLINE

AUDIOLINE TEL5CLIP Bedienungsanleitung

AUDIOLINE

AUDIOLINE TAB958CLIP Bedienungsanleitung

AUDIOLINE

AUDIOLINE BIGTEL 42 PLUS Bedienungsanleitung

AUDIOLINE

AUDIOLINE Funny Cow Phone Bedienungsanleitung

AUDIOLINE

AUDIOLINE 505 Bedienungsanleitung

AUDIOLINE

AUDIOLINE TEL106 Bedienungsanleitung

AUDIOLINE

AUDIOLINE TEL38 SMS Bedienungsanleitung

AUDIOLINE

AUDIOLINE TAB968 Bedienungsanleitung

AUDIOLINE

AUDIOLINE TEL 8 PLUS Bedienungsanleitung

AUDIOLINE

AUDIOLINE SENSOR 500 Handbuch

AUDIOLINE

AUDIOLINE TEL48G Bedienungsanleitung

AUDIOLINE

AUDIOLINE TEL19 Bedienungsanleitung

AUDIOLINE

AUDIOLINE TEL136 Bedienungsanleitung

AUDIOLINE

AUDIOLINE AL502 Bedienungsanleitung

AUDIOLINE

AUDIOLINE OSLO 501 Bedienungsanleitung

AUDIOLINE

AUDIOLINE TEL5 clip Bedienungsanleitung

AUDIOLINE

AUDIOLINE 703 Bedienungsanleitung

Beliebte Telefon Handbücher anderer Marken

GE 2-9480 Bedienungsanleitung

Geemarc

Geemarc PHOTOPHONE 155 Bedienungsanleitung

Interquartz

Interquartz Gemini IQ333 Bedienungsanleitung

SSS Siedle

SSS Siedle HT 840-0 Bedienungsanleitung

Motorola

Motorola TITANIUM Bedienungsanleitung

Panasonic

Panasonic ICX Bedienungsanleitung

LG H870DS Bedienungsanleitung

Samsung

Samsung GT-I9500 Bedienungsanleitung

AT&T

AT&T Trimline 205 Bedienungsanleitung

Selta

Selta zenyth 600 Bedienungsanleitung

Doro

Doro AFTI 20 Bedienungsanleitung

UNIQCELL

UNIQCELL A1 Bedienungsanleitung

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Bedienungsanleitung

BT Decor 425 Bedienungsanleitung

NEC

NEC SV8500 Bedienungsanleitung

Teledex

Teledex PEARL Bedienungsanleitung

Ericsson

Ericsson Dialog 3213 Bedienungsanleitung

Yealink

Yealink VP530 Bedienungsanleitung