Audiovox CDM-3000 Bedienungsanleitung
AUDIOVOX
CDM-3000/CDM-3000XL
DualModeCDMA/AMPS
HandheldPortable
CellularTelephone
Congratulations… You have just purchased one of the most advanced cellular telephones in the market today. Your new
Audiovox portable telephone is a dual mode cellular telephone operating in both the standard analog and the CDMA
“digital” modes.
CDMA technology is a superior digital technology that greatly increases the quality and capacity of the cellular system
and will provide you with enhanced features and services. Among the many additional benefits your new Audiovox
portable phone will provide while operating in the digital mode are, superior voice quality, increased talk and standby
times and enhanced privacy.
Your new Audiovox dual mode cellular telephone combines all the advantages of CDMA digital technology along with
Audiovox innovative engineering into a small, attractive unit that is very easy to use.
The Audiovox CDM-4000/CDM-4000XL is packed with advanced features that provide you with advanced features that
provide you with the ultimate in convenience and performance such as a large 3 line 26 character LCD display, 99 alpha
numeric memory locations, a user friendly multi-function key, as well as a one touch voice mail access key.
Other feature highlights include one touch emergency dialing, 10 number caller ID storage and scroll, text messaging and
voicemail notification.
Optional accessories include a slim profile nickel metal hydride battery, a hands free car kit, a battery eliminator, cigarette
lighter charger, earphone/microphone and a data interface device (check availability). A leather carrying case is also
available.
And of course, your new Audiovox Dual Mode cellular telephone comes with something only an Audiovox phone can
provide. The proven reliability that has made Audiovox one of the world’s leading suppliers of cellular communications
equipment.
Please take a few moments to read the following pages of the user’s operation manual. It will help you make the most
efficient use of this valuable communications tool.
SYSTEMCONFIGURATION
System configuration and the equipment list are as shown below
WRISTSTRAPATTACHMENT
Attach the wrist strap to the phone through the strap hole as shown below 1
Then pull the long loop through the smaller loop as shown below 2
BATTERYINSTALLATIONANDRECGARGING
To AttachtheBatteryPack
1. Insert the hook at the end of the Battery Pack into the slot at the end of the phone.
2. Press the Battery Pack down to lock the Battery Pack onto the phone.
To Detach the Battery Pack
1. Slide back the Release Latch as shown below.
2. Lift up to remove the Battery Pack from the phone gently
TORECHARGEBATTERY
The Desk Top Battery Charger (DTC-3000) can recharge a Battery alone or while it is attached to the Portable Tele-
phone.
DC voltage is supplied by the separate AC Adaptor. It takes approximately 2.5 hours for full charge.
1. The LED (Light Emitting Diode) on the Desk Top Battery Charger lights green when DC voltage is supplied from
the AC Adaptor.
2. The Battery charging starts when the Portable Phone or a Battery is placed into the battery charger. The LED then
lights red.
3. When the charging is finished, the LED changes to flashing green.
Notes:
1. Environmental temperature for full battery recharging with 2.5 hours: 0 ~ +35oC.
2. We recommend you to turn off the power of the telephone to secure complete recharging of the battery.
3. The Battery Charger and the Battery Pack will get warm during the charging cycle. This is normal.
GETTINGSTARTED
Turning the Phone On/Off
Press for more than one second. All the indicators and the digit display will light momentarily, and a tone will
be heard. The indicator will stay while the phone is turned on. To turn the phone off, press for more than
one second..
AntennaPosition
Your portable cellular telephone is equipped with a dual position antenna system,
This dual position antenna has been especially designed to allow your phone to receive calls while the antenna is
down. However, for optimum performance and signal strength or while operating in poor signal areas, it is recom-
mended that the antenna be fully extended.
Note: The antenna can be used in its fully extended od fully retracted position only.
ReceivingSignalStrengthIndicator
The number of lines indicates the Signal Strength in your area. Four lines show the maximum level. The display will
vary as you move with the phone. If the signal is not strong enough to place a call, “ ”will appear on the
LCDdisplay.
BatteryLevelIndicator
You can always monitor the battery charge condition with the constant battery level indicator. The number of blocks
indicates the battery conditions as follows:
BASICOPERATION
Placing Calls
To Place a Call
1. Enter the phone number.
2. The dialed number is displayed on the LCD display. (A maximum of 32 digits will be displayed.)
3. Press . The “ ”indicator will light.
Note: If a dialing error is made, press , and re-enter.
Pressing momentarily clears the last digit only.
Pressing and holding erases all the digits.
Example: ToCall1234567890
1. Enter 1 2 3 456 7 8 9 0
2. Press .
3. Talk with the other party.
Note: If a dialing error is made, press , and re-enter.
Pressing momentarily clears the last digit only.
Pressing and holding erases all the digits.
Ifthe CallFailstoGoThrough
·If you hear the “reorder” signal, press and if there were no dialing errors, press to redial. (Re-
entering the digits is not necessary.)
·If the “intercept” signal is heard, press then re-enter the correct number, and press .
ToMuteaPhoneConversation
Example:
ScratchPadDialing
This feature permits you to enter a number to be dialed (or to store a number in memory) while engaged in a conversation.
When key tones volume is set to “silent” mode, the Scratch-Pad Dialing can be performed without hearing the key tones.
Terminating aCall
Press . The “”indicator will go out.
To Receive a Call
When the telephone rings, press to answer the call. The “ ” indicator will light.
AnyKeyAnswering
This feature permits you to answer an incoming call by pressing any key on the keypad.
Note: The following keys will not answer the call. , and .
AutomaticCalls-in-AbsenceIndictor
This feature indicates the number of unanswered incoming calls. If incoming calls are not answered, the LCD display will
indicate “Called XX”.”XXis the number of calls (01 to 99) missed. For example, if two calls were not answered, teh
displaywill be:
Depressing any key (other than ) will clear the number of calls indicated in display. However, the number of calls
will be retained, even if the phone is turned off.
ClockIndicator(DigitalModeOnly)
When the phone is in an area with digital service (Digital Mode) with this feature enabled, the date, day, and the time are
automatically displayed.
1. Press .
2. You can turn this feature on/off by or .
3. Press to set.
4. A time display example is as follows.
Notes: 1. During Digital Mode, indicator lights.
2. During Analong Mode, or while is indicated, the time display is not available even if this
feature is on.
BacklightControl
The LCD display and keypad are backlighted automatically after Power-On. The Backlighting duration can be changed.
Four modes are available.
1. Press .
2. You can change the current mode by or .
3. Press to set.
·10 seconds Mode
Backlight is on for 10 seconds after a key is pressed. It also lights automatically when the power is turned on and for an
incomingcall.
·30 seconds Mode
Backlight is on for 30 seconds after a key is pressed. It also lights automatically when the power is turned on and for an
incomingcall.
·OffMode
Backlight is on momentarily when the power is first turned on, but remains off thereafter.
·Always On Mode
Backlight is always on.
OwnTelephoneNumberDisplay
This feature enables you to display your own telephone number and the ID number (SID) of your “Home” Cellular
System.
Press .
LowBatteryAlarm(F36-9)
When activated, this feature warns by an audible alarm when the battery level is low. If the alarm is given, recharge the
battery or replace it with a fully charged battery.
1. Press .
2. You can turn this feature on/off by or .
3. Press to set.
VolumeandToneControls
EarpieceVolumeControl
1. Press . Press repeatedly until you have the following display.
2. Keep pressing or until you get the desired sound level.
AlertTone VolumeControl
1. Press . Press repeatedly until you have the following display.
2. Keep pressing or until you get the desired sound level, or “silent” mode.
Note: In “silent” alert mode, alert tone is not given for an incoming call. However, if Automatic Answering feature is
ON, alert tone is given with the lowest available volume.
SingleAlertBeep Tone
This feature is used to signal incoming call with only a single beep. This feature can only be used with the “silent” alert
mode.
To activate:
1. Press .
2. You can turn this feature on/off by or .
3. Press to set.
KeyToneVolumeControl
1. Press . Press repeatedly until you have the following display.
2. Keep pressing or until you achieve the desired sound level, or “silent” mode.
Note: In “silent” key tone mode, you can make Scratch Pad Dialing without key tone.
KeyToneLength
This feature selects the duration of the tone length when a key is pressed.
1. Press .
2. You can change the current mode by or .
3. Press to set.
·Normal Mode
Tone is heard as long as the key is being pressed.
·Short Mode
Tone is heard for a short time even if the key remains pressed.
LockFeatures
Your phone is equipped with three Lock modes as described below.
KeypadLock
This mode is used for preventing inadvertent pressing of keys. (For example, when the phone is in a purse or pocket.)
With this feature on, the following functions are still available.
·Incoming calls can be answered with .
·Programmedemergencynumbers can becalled. (Except for OneTouchEmergencyCall.)
The following functions are not available when this feature is on.
·Automatic Answering
·Any Key Answering
·OneTouch EmergencyCall
·Turning off the phone by .
To Activate/Deactivate this feature;
1. Press to activate “Keypad Lock” mode.
2. Press again to deactivate.
PhoneLock
This mode is useful to prevent unauthorized use of the phone. With this feature on, the following functions are still
available.
·Incoming calls can be answered with .
·Any Key Answering
·ProgrammedEmergency Call
·OneTouch EmergencyCall
·Turning off the phone by .
The following function is not available when this feature is on.
·Automatic Answering
To Activate;
1. Press .
Andere Handbücher für CDM-3000
1
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Audiovox Handy Handbücher
Audiovox
Audiovox CDM 8900 Bedienungsanleitung
Audiovox
Audiovox MVX-480 Series Bedienungsanleitung
Audiovox
Audiovox PPC6601 Bedienungsanleitung
Audiovox
Audiovox GPRS900 Bedienungsanleitung
Audiovox
Audiovox CDM-8910 Bedienungsanleitung
Audiovox
Audiovox CTX-4200 Bedienungsanleitung
Audiovox
Audiovox Flasher OV7 Bedienungsanleitung
Audiovox
Audiovox CDM-8425PTT Bedienungsanleitung
Audiovox
Audiovox CDM-8920 Bedienungsanleitung
Audiovox
Audiovox Minivox MVX-850 Bedienungsanleitung
Audiovox
Audiovox CDM-9200X Bedienungsanleitung
Audiovox
Audiovox Z800 Bedienungsanleitung
Audiovox
Audiovox PCX-1000XL Bedienungsanleitung
Audiovox
Audiovox CDM 8600 Bedienungsanleitung
Audiovox
Audiovox Sprint PCS Vision VI600 Bedienungsanleitung
Audiovox
Audiovox MVX-440 Bedienungsanleitung
Audiovox
Audiovox MVX300 Bedienungsanleitung
Audiovox
Audiovox AudioTel CMT-1000 Bedienungsanleitung
Audiovox
Audiovox TX-130CA Bedienungsanleitung
Audiovox
Audiovox TX-130C Bedienungsanleitung
Beliebte Handy Handbücher anderer Marken
Point Mobile
Point Mobile PM60 Bedienungsanleitung
Blackbe;rry
Blackbe;rry Q10 Bedienungsanleitung
Blackbe;rry
Blackbe;rry Bold 9900 Bedienungsanleitung
Blackbe;rry
Blackbe;rry STORM 9500 - VERSION 5.0 Bedienungsanleitung
LG
LG LM-K420EMW Bedienungsanleitung
ISAFE MOBILE
ISAFE MOBILE IS655.2 Bedienungsanleitung