Audiovox AVD400A - AVD 400A - DVD Player Bedienungsanleitung
AVD400A
SLOT-IN DVD PLAYER
Owner’s Manual
AVD400A DVDPLAYER
DOLBY
2
A. Welcome
Thank you for choosing the AVD400ADVD Player. TheAVD400Ais
designed to optimize the enjoyment of your favorite DVDs in the mo-
bile environment. This DVD Player is constructed to provide years of
reliable,trouble-freeservice.Pleaseread thismanualthoroughly prior
to operating the player and save it for future reference.
B. Precautions
EXPLANATION OFGRAPHIC SYMBOLS
The lighting flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of
uninsulated ‘dangerous voltage’ within the product’s enclosure
that may be of sufficient magnitude to constitute risk of electric
shock to persons.
The exclamation point within an equilateral triangle is intended
toalerttheuser tothepresenceofimportantoperatingandmain-
tenance (servicing) instructions in the literature accompanying
theappliance.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK. DO NOT
EXPOSE THIS DEVICE TO MOISTURE.
3
SAFETY PRECAUTION
Forsafety reasons donotallow children to unfastenseat-beltsto change
video media or make any adjustments to the system. Enjoy your enter-
tainment system but always remember the safety of all passengers is
the number one priority.
IMPORTANT NOTICE
It is unlawful in most states for a person to drive a motor vehicle which is
equipped with a television viewer or screen that is located in the motor
vehicle at any point forward of the back of the driver’s seat, or that is
visible, directly or indirectly, to the driver while operating the vehicle. In
the interest of safety, this system should never be installed where it will
be visible, directly or indirectly, by the operator of the motor vehicle.
1. OBJECTS AND LIQUID
Do not insert objects of any kind into the system through its open-
ings; do not spill or spray liquid on or into the system (this may
result in a fire or electric shock). Do not place heavy objects on the
unit.To ensureproperventilationand properoperation, nevercover
or block the slots and openings.
2. DISASSEMBLY
Do not attempt to disassemble the unit. There is a risk of electric
shock and/or exposure to Laser Radiation. Contact qualified ser-
vice personnel if your system is in need of repair.
3. CLEANING UNIT
Whencleaning,makesurethesystemisunplugged from thepower
source. Do not use any solvents or cleaning materials. Clean the
DVD player using a lightly dampened lint free cloth to wipe the unit.
4
4. DISCS or (DISC Media)
Do not use irregularly shaped discs such as heart or star-shaped
discs as they may cause the unit to malfunction. Do not stick pa-
per, tape or glue on the disc. Do not expose the disc to direct sun-
light or heat sources. Do not touch the surface of the disc. Handle
the disc by its edges. Clean the disc by wiping the disc from the
center out with a soft lint free cleaning cloth. Remove the disc from
the unit and store it in its case after playing. Some playback opera-
tionsof discs may be intentionallyfixedby software producers. Unit
plays discs according to the disc contents the software producers
designed therefore some playback features may not be available.
Refer to the instructions supplied with the discs.
5. Powering the DVD Player
This system MUST be powered from switched (Accessory) power
as indicated on the marking label. Power should be applied to the
unit when the ignition key is in the Run and/orAccessory positions.
Use only the supplied power cable provided with this set to avoid
electric hazards.
6.Operation
When the temperature rises dramatically from a very low tempera-
ture, moisture may condense inside the AVD400A and cause the
DVD player to malfunction. If theAVD400Adoes not operate prop-
erlyunderthese conditionsleave theAVD400Aturnedonforatleast
30 minutes for the moisture to evaporate.
5
C. Contents
1. 1 Main Unit
2. 1 Remote control with one Battery
3. 1 12VDC Power Harness
4. 2 Brackets with 4 Screws
5. 1 Remote IR Receiver
6. 1AV cable (RCA to RCA)
7. 1 Owner's Manual (not shown)
X4
AVD400A DVDPLAY E R
DOLBY
AUDIOVOX
1. 2.
3. 4.
5. 6.
6
D.Controls
MainUnit(RefertoFigure1)
AVD400A DVDPLAYER
DOLBY
110
9
8
76
5
4
3
2
1
C
C
F
DOLBY
11
12
13
14
15
16
17
18
1. Power Button
2. Play/Pause Button
3. ModeButton
4. Remote Control Sensor
5. VideoInput
6. LeftAudioInput
7. RightAudio Input
8. Next Button
9. Previous Button
10. Eject Button
11. IRInput
12. DigitalAudio Output
13. Audio R Output Jack
14. Audio L Output Jack
15. Video Output Jack
16. S-Video Output Jack
17. External Remote Eye Input
18. DC In 12V Power Supply Connector
Figure1
7
E.
Remote Control View
(Refer to Figure 2)
1) MODE Button
2) POWER Button
3) MENUButton
4) UP/DOWN/
LEFT/RIGHTButton
5) ENTER/PLAYButton
6) VOLUME +/- Buttons
7) NUMERICKEYPAD
8) 10+ Button
9) TITLEButton
10) AUDIOButton
11) REPEAT Button
12) SUBTITLEButton
13) DISPLAYButton
14) EJECT Button
15) SETUP Button
16) PAUSEButton
17) STOP Button
18) NEXTButton
19) PREVIOUSButton
20) SCAN FORWARD Button
21) SCAN REVERSE Button
22) MUTEButton
23) GOTO Button
24) ZOOMButton
25) A-B REPEAT Button
26) ANGLEButton
27) SLOW Button
Figure2
8
F.Connections
Figure3
1. Powering your DVD Player ( Refer to Figure 3)
Connect the black wire (-) to the vehicle ground. Connect the red
wire (+) to a switched (Accessory) 12VDC source. Plug the other
end into the 12VDC input jack on the back of the unit.
2. Remote IR Receiver ( Refer to Figure 3)
Plugthe 1/8” plugonthe remote IR cableinto the IR INjack on the
back of the DVD player. Place the IR receiver anywhere in the
vehicle to allow remote control from any location.
3. Connecting to a Monitor ( Refer to Figure 3)
a. Match the color-coded plugs to the appropriate jacks on the
back of the DVD PlayerA/V OUTPUT jacks: Yellow (video) to
Yellow,White (leftaudio)toWhite, and Red(rightaudio) to Red.
4. Connecting an External Video Source ( Refer to Figure 3)
To connect a video game or another audio/video source, plug the
A/V cable into theA/V input jack on the front of the DVD player.
AVD400A DVDPLAYER
DOLBY
Front
Rear
Yellow Video Input (to DVD Player)
Red Audio In
White Audio In
9
POWER
EJECT
PLAY
SLOW
PAUSE
STOP
NEXT
PREVIOUS
FASTFORWARD
FASTREVERSE
UP/DOWN/LEFT/RIGHT
ENTER
NUMBERS
RETURN
MENU
REPEAT
DISPLAY
ANGLE
SUBTITLE
AUDIO
ZOOM
SETUP
Turn the unit on/off
Eject/load the disc
Start Play/Execute item or setting
Play at 1/2, 1/4, 1/6 or 1/7 times speed
Still Picture
(1 time) Stop at the present playing point /
(2 times) Stop playing
Go to the next chapter, track or scene during play
back
Go back to the preceding chapter, track or scene
during play back
Scan forward at 2, 4, 8 or 20 times normal speed
Scan backward at 2, 4, 8 or 20 times normal
speed
Used for Menu Navigation
Execute item or setting
Select item or setting
Return
Display the root menu of the disc
Repeat playing title, chapter, or track
Display information (title, chapter, track, time, etc.).
Change the angles of a scene
Select the subtitle language
Select the audio language
Enlarge an image to 2, 3, or 4 times the
original
When the unit is in play mode this button will bring
up a display for Brightness + Sharpness adjustment.
For DVD playback Setup press stop and then press
Setup to select and set items, and exit the setup
menu.
G.Playing
After connecting power to the unit, press the power button on the
main unit momentarily. Insert the disc into the slot on the front of the
unit,the unitwillload thediscand startplayingautomatically: If there’s
a disc inside the unit, press the POWER button, the unit will start
playingautomatically.
1. BASIC OPERATION
10
2. MENU
A DVD is divided into sections called titles and chapters. When you
play a DVD, a root menu of the disc will appear on the screen of your
TV or Monitor. Contents of the menu will vary depending on the disc
content.PressMENUduringplaybacktodisplaythemainmenu. Some
DVDs only allow you to select disc playback options using the DVD
root menu.
3. DISPLAY
1) Display mode
Duringplayback press DISPLAYonce todisplayitems 5, and 7.Press
DISPLAYtwicetodisplay thecurrentdiscplayback information. Press
display again to remove the display.
Display Mode
1. The type of disc.
2. The number of current title.
3. The number of total titles.
4.Thenumber of current chapter.
5. The elapsed time of title.
6.The number of total chapters.
7. The remaining time of title.
8.Thenumberofthecurrent
angle.
9.The number of total angles.
10.Thenumberofthecurrentaudiolanguage.
11. Thenumberof totalaudiolanguages.
12.Thenumberofcurrentsubtitlelanguage.
13.Thenumber of total subtitle languages.
14.Currentsubtitlelanguage.
15.Dolbyaudiomode.
16.Currentaudiolanguageselected.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Audiovox DVD-Player Handbücher
Audiovox
Audiovox AVD200T Bedienungsanleitung
Audiovox
Audiovox VODEXL10 A Bedienungsanleitung
Audiovox
Audiovox VE920 Service-Handbuch
Audiovox
Audiovox AVD300T Bedienungsanleitung
Audiovox
Audiovox VOD705 Bedienungsanleitung
Audiovox
Audiovox VOD715 - DVD Player With LCD Monitor Bedienungsanleitung
Audiovox
Audiovox D1730 Bedienungsanleitung
Audiovox
Audiovox AVD300 Bedienungsanleitung
Audiovox
Audiovox DVD3200 Montageanleitung
Audiovox
Audiovox PVS3393 Bedienungsanleitung
Audiovox
Audiovox MMDV3 Bedienungsanleitung
Audiovox
Audiovox AVD400TA Bedienungsanleitung
Audiovox
Audiovox VOH10FR Bedienungsanleitung
Audiovox
Audiovox VE920 Service-Handbuch
Audiovox
Audiovox PVS72901 Bedienungsanleitung
Audiovox
Audiovox MMDV4 Bedienungsanleitung
Audiovox
Audiovox Dvd3100 Bedienungsanleitung
Audiovox
Audiovox ADV48 Bedienungsanleitung
Audiovox
Audiovox VOH8512 Bedienungsanleitung
Audiovox
Audiovox MMH56 Bedienungsanleitung
