Audiovox LCM1700TV Bedienungsanleitung

INSTRUCTION

MAIN FEATURE 2

FRONT/BACK OF MONITOR 2,3

FUNCTION 3

INST ALLING

COMPONENTS 4

PRECAUTIONS IN INSTALLING 4

CONNECTING TO YOUR PC For 15" Only 5

TV/VIDEO FUNCTION SETTING

PICTURE CONTROL 7

SOUND CONTROL 8

INSTALL 9

OSD 10

TELETEXT FUNCTION

TELETEXT (OPTION) 11,12

PC FUNCTION SETTING

OSD CONTROL 13

CONTRAST / BRIGHTNESS /ADJUST CONTROL 14,15

OTHERS

POWER SAVING MODE(S) 16

STANDARD SIGNAL TIME CHART 17

PRECAUTIONS 18

TROUBLE SHOOTING 19

REMOTE CONTROL 20

SPECIFICATIONS For 15" Only

SPECIFICATIONS For 17" Only

FCC Compliance Statement

Note :

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment dose cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

- Consult the dealer or an experienced radio /television technician for help.

Notice 1 :

The changes or modifications not expressly approved by the party responsible

for compliance could void the user's authority to operate the equipment.

Notice 2 :

Shielded interface cables, if any, must be used in order to comply with the

emission limits.

DOC CLASS B NOTICE

This digital apparatus does not exceed Class limits for radio noise emission

for a digital apparatus as set out in the Radio Interference Regulations of the

Canadian Department of Communications.

CONNECTING TO YOUR PC For 17" Only 6

BACK OF MONITOR

FUNCTIONS

Although regular monitors for PCs use CDT as a medium for display, the TFT

LCD monitor is a Flat Panel Display based on digital technology, and was

originally used only for laptops PCs. Now it is used for desktops and laptops

alike, opening a world of conveniences and quality to those ardent PC users.

The following functions are provided in our products.

1. Convenient and easy to handle Control Button.

2. From PC function to TV/VIDEO functions.

3. Remote Control.

4. A slim and space reducing monitor.

5. Monitor transferable for wall hanging.

6. Industrial robot and VESA install able.

7. Liberal angle control.(+30 ~ -5 )

8. Low energy consumption.

9. Scarcely influences surrounding objects, with no harmful electronic waves,

noise, heat or magnetic activities.

Ventilator(Caution! )

Do not block the ventilator

Hole for wall hanging

Detachable Base

Detachable for other equipments

(VESA ARM) and wall hanging use.

Connector to External Functions

Connects signals with external

equipments and PCs. (TV/VIDEO)

MAIN FEATURES

FRONT OF MONITOR

Thank you for purchasing our high resolution TFT LCD monitor.

We recommend that you thoroughly read through this user's guide

before using the product.

It is also recommended to safely store the guide in times of

immediate need in the course of using the product.

LCD Panel

Control Button

Select

Power Switch

Uesd in turning on/off the screen.

The power light shows regular and

safe mode functions with colors.

Speaker

Detachable Base

1. Connect to 12V DC with the adapter included in the box to 100V~240V

outlet.

2. Connect signal cable to PC. "Check Signal Cable"will appear on the

monitor if improperly connected. In case of using Macintosh, use the

exclusive adapter.

3. Connect to S-VHS Terminal of VCR, DVD,Camcorder.(optional)

4. Connect to Terminal of composite or Y-Terminal of component.

5. Connect to Pb-Terminal of component.

6. Connect to Pr-Terminal of component.

7. Connect to input terminals L, R that need Audio output.(DVD, VCR or

CAMCORDER)

8. Connect headphones to the connecting terminal.

9. Connect to PC Audio output.

10.Connect to antenna or CATV connecting cable to the 'Antenna' terminal.

12V DC S-VHS ( Y Pb pr )

VIDEO

PC L R

AUDIO

H-

PHONE S/T- IN ANTENNA

Connect to 100V~240V capacity outlets. (Free Voltage)

COMPONENTS

PRECAUTIONS IN INSTALLING

After discarding the package and wrapping of the LCD TV,

check for the following components in the box.

Components

LCD TV Power Adapter User s Guide Signal Cable

Power Cable Audio Cable Remote Controller

Battery (AA) 1.5V x 2

Install on safe ground. : There's a possibility of damage of the product

or harming people.

Always cover the product or keep in a well ventilated place. : There is danger

of fire and also for safe maintenance.

Do not put anything containing water, medicine, small metal material, or heavy

objects on the product. : Danger of fire, electrocution, and damage

to the product.

Do not expose the product to direct sun light. : The screen will not maintain

clarity and may cause damage to the eye.

Do not install in damp, dusty, or wet places. : Danger of fire and electrocution.

Do not put candles, cigarettes, or other objects with excessive heat. : Danger

of fire.

Do not install any external connections, only connecting cords and

adapter included in the box. : Damage and fire may occur.

12V DC Jack

PC 15 pin Jack

S-VHS Jack

Terminal Cable Y (Composite or Component)

Terminal Cable Pb (Component)

Teminal Cable Pr (Component)

Audio Cable L . R

Head Phone Jack

PC Audio Jack

TV Antenna Jack

CONNECTING TO YOUR PC for 15" Only

CONNECTING TO YOUR PC for 17" Only

Menu Picture Contrast Select

Control with Menu

Menu Picture Brightness Select

Control with Menu

Menu Picture Color Select

Control with Menu

Menu Picture Sharpness Select

Control with Menu

Menu Picture Tint Select

Control with Menu

12V DC PC

TV/ VIDEO FUNCTION SETTING

1 : 12V DC Jack

2 : PC 15 pin Jack

3 : Head Phone Jack, PC Audio Jack

4 : TV Antenna Jack

5 : SCART

6 : S-VHS

7 : DVD/S-VHS Audio Jack L, R

8 : Terminal Cable Pr(Composite or Component)

9 : Terminal Cable Pb(Component)

10: Terminal Cable Y (Component)

11: Input Audio Jack L, R

12: Input Video Jack

13: Output Audio Jack L, R

14: Output Video Jack

1 2 3 4

5 6 7 8 9 10 11 12 13 14

H-

Phone

S/T

IN ANTENA

SCART S-VHS R L Pr Pb Y R L VIDEO R L TV

AUDIO AUDIO AUDIO

IN OUT

1. Connect to 12V DC with the adapter included in the box to 100V~240V

outlet.

2. Connect to signal cable to PC. "Check Signal Cable" will appear on the

monitor if improperly connected. In case of using Macintosh, use the

exclusive adapter.

3. Connect to headphones to the connecting terminal and PC Audio output.

4. Connect to antenna or CATV connecting cable to the 'Antenna' terminal.

5. Connect to SCART

If you connect the SCART, you must remove the RCA(COMPOSITE).

6. Connect to S-VHS Terminal of VCR, DVD, Camcorder.(Optional)

7. Connect to input Audio Terminals L,R of Component

8. Connect to Pr-Terminal of component.

9. Connect to Pb-Terminal of component.

10. Connect to Terminal of composite or Y-Terminal of component.

11. Connect to Input Audio Terminals L,R of Composite

12. Connect to Input Video Terminal of Composite

13. Connect to Output Audio Terminas L,R of TV

14. Connect to Output Video Terminal of TV

Picture

Controlling Screen Contrast

Controlling Screen Brightness

Controlling Screen Color

Controlling Screen Sharpness

Controlling Screen Tint(only NTSC)

You can control the contrast of the images or letter on the screen.

You can control the brightness of the screen.

You can control the color of the screen.

You can select the sharpness of the screen.

You can select the tint of the screen.

CONNECTING TO YOUR PC for 17" Only

Sound

Adjust Volume

Adjust Treble

Adjust Bass

Adjust Balance

You can adjust volume of this screen.

You can adjust the Bass of this screen.

You can adjust the Balance of this screen.

You can adjust the Treble of this screen.

You can skip the channel(Yes No).

You can store the channel(P0 P99).

You can change range of tuner positively or negatively( 0.05Mhz)

You can change channel range positively or nagatively.

You can choose the TV Sound(BG DK I).

You can choose the TV System(PAL SECAM).

You can search channels automatically

Install

Auto search

TV System(PAL Only)

TV Sound(PAL Only)

Manual tune

Fine Tune

Store to

Skip

1211

OSD (On Screen Display)

Vertical position of OSD

Halftone of OSD

Horizontal position of OSD

You can adjust vertical position of OSD.

You can adjust horizontal position of OSD.

You can adjust halftone

Input

TV or changing to another mode

You can change input mode

(TV COMPOSITE S-VHS COMPONENT PC)

Press the TELETEXT button ( ). The index page viewed last will appear.

Press the TELETEXT button to return to the TV mode.

A red,green, yellow and blue field is shown at the buttom of the screen.

If TOP or FLOF teletext(FASTEXT) is transmitted by the station, pressing

the corresponding color button on the remote controller, you can select

the desired page easily.

The NUMBER button 0...9 are used to enter a page number.

The selected page number appears at the top of the screen and the page

appears after a short time.

The UP/DOWN buttons increase or decrease the current page number by 1.

You can switch directly to the program preview(with TOP text)

or the overview page of the station you are currently viewing by

pressing the INDEX( ) button. .

several sub pages can be combined under a page number and are scrolled

at an interval determined by the television station.

The presence of sub pages is indicated by, Y example, 3/6beneath the

time, which means that you are looking at the 3rd page of a total of 6pages.

If you want to look at a subpage for a longer period of time, press the

HOLD( )button.

The contents of the subpage shown are kept on the screen and no longer

updated or switched to other subpages. The HOLD symbol ( ) will be

displayed on the top left hand side instead of the page no..

Pressing the HOLD button again, the current subpage will appear.

TELETEXT(Option)

SWITCHING TELETEXT ON/OFF

COLOR BUTTONS IN TOP/FLOF TELETEXT

SELECTING PAGES

INDEX PAGE

PAGE HOLD

The NUMBER button 0...9 are used to enter a page number.

The selected page number appears at the top of the screen and the page

appears after a short time.

The UP/DOWN buttons increase or decrease the current page number by 1.

Some pages are continually updated, for example, stock market reports,

sports announcements, and the latest news.

If you want to watch television and stay informed at the same time, press

CANCEL( )button.

The regular program is still visible and the telext symbol( )appears at

the top of the screen.

Pressing the CANCEL button again, the teletext page appears with the

update information.

This function can be used on certain pages to reveal the solution of riddles.

Press the REVEAL button( ) to reveal a hidden answer and press again

to hide it.

Repeatedly pressing the SIZE button( ) doubles the character size in the

following order: Upper half of the page-> Lower half of the page-> Return to

normal size.

CALLING UP SUBPAGE DIRECTLY

WATCHING TELEVISION DURING TELETEXT MODE

REVEAL ANSWER

DOUBLING CHARACTER SIZE

PC FUNCTION SETTING

Menu Information Select

Control with Menu

Menu INPUT Select

Control with Menu

Menu OSD Control V Position Select

Control with Menu

Menu OSD Control H Position Select

Control with Menu

OSD Control Halftone

Select

Control with Menu

Information

Information of the screen

Input Source

TV or changing to another mode

OSD Control

Vertical Position of OSD

Horizontal Position of OSD

Halftone of OSD

You can see the information of the screen.

You can change input mode.

(TV - Composite - S-VHS - Component - PC)

You can adjust vertical position of OSD.

You can adjust horizontal position of OSD.

You can adjust halftone of OSD.

Menu Picture Contrast Select

Control with Menu

Menu Picture Brightness Select

Control with Menu

Menu Adjust V Po. Select

Control with Menu

Menu Adjust H P. Select

Control with Menu

Contrast

To clarify the screen

Brightness

To control brightness of the screen

Adjust

Vertical Position

Horizontal Position

You can control the contrast of the images or letter on the screen

You can control the brightness of the screen.

You can adjust th vertical position of the screen.

You can adjust the horizontal position of the screen.

Adjust

Phase Adj. Select

Control with Menu

Adjust

Auto Adj. Select

Control with Menu

Adjust Reset.

Select

Control with Menu

Adjust Clock Adj.

Select

Control with Menu

Clock Adjust

Phase Adjust

Auto Adjust

Reset

You can adjust the clock.

You can adjust the phase.

You can adjust position of the screen automatically.

You can reset the screen.

POWER SAVING MODE(S)

If your computer system features a display power management function,

the Monitor enters into the power saving modes as follows.

When it is used with a computer system equipped with DPMS(VESA) this

Monitor provides an EnergyStar compliant function. If your computer

does not feature display power management, please source an optional

DPMS software program.

Power saving modes greatly reduce power consumption when the

computer is temporarily not in use. Simply press any key or mouse

button to return the Monitor display to normal operation.

Normal

Operation

Power Saving function EPA

stand-by suspend Power Off

H-Sync Active

Active

Green

35 Watts

Less Than

Inactive

Active

Blanked

Orange/Green

Blinking(1sec)

8 Watts

Less Than

Active

Inactive

Blanked

Orange/Green

Blinking(0.5sec)

8 Watts

Less Than

Inactive

Blanked

Orange

5 Watts

Less Than

V-Sync

Video

LED Color

Power

Consumption

If the signals conveyed from the computer match the following

standard signals, the screen automatically controls the signals.

Conversely, if the signals do not match,the screen will not appear or

only the power light would activate. Therefore it is important that you

first set as the following, with reference to the Video Card Guide.

STANDARD SIGNAL TIMING CHART

1152x864

1280x1024

54.5

63.8

65.8

68.5

64.9

60.0

70.0

72.0

75.0

60.0

90..000

96..600

98..000

108..000

16 17

Inhaltsverzeichnis

Andere Audiovox Monitor Handbücher

Audiovox

Audiovox LCM5043NP Montageanleitung

Audiovox

Audiovox LCM-5600 Bedienungsanleitung

Audiovox

Audiovox LCM45NB Bedienungsanleitung

Audiovox

Audiovox MZ7TFT Bedienungsanleitung

Audiovox

Audiovox LCM500NP Bedienungsanleitung

Audiovox

Audiovox AVXMTG10U Bedienungsanleitung

Audiovox

Audiovox D1909 - DVD Player - 9 Bedienungsanleitung

Audiovox

Audiovox MM1500 Bedienungsanleitung

Audiovox

Audiovox LCM58N Bedienungsanleitung

Audiovox

Audiovox LCM-0565 Bedienungsanleitung

Audiovox

Audiovox VOH1012 S Bedienungsanleitung

Audiovox

Audiovox AVX10USB Bedienungsanleitung

Audiovox

Audiovox MZ7TFT Bedienungsanleitung

Audiovox

Audiovox AOM562A Bedienungsanleitung

Audiovox

Audiovox Eddie Bauer PE703 Bedienungsanleitung

Audiovox

Audiovox VBPEX5 Bedienungsanleitung

Audiovox

Audiovox MMD154 Bedienungsanleitung

Audiovox

Audiovox LCM45NB - LCM 45NB - LCD Monitor Bedienungsanleitung

Audiovox

Audiovox ACAM350 Bedienungsanleitung

Audiovox

Audiovox LCM-5600NP Bedienungsanleitung

Audiovox

Audiovox LCM5869NP Montageanleitung

Audiovox

Audiovox VBDV56 Bedienungsanleitung

Audiovox

Audiovox LCM-0565 Bedienungsanleitung

Audiovox

Audiovox LCM-0505 Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung