Audiovox VE-500A Bedienungsanleitung

-1-

VE-500A

Low Profile Television

5” LCD Drop Down Under Counter TV

Installation and Operation Manual

nMulti-function Remote Control

nAutomatic Channel Programming

nCable Ready 125 Channel Tuner

nInternal Stereo Speakers

nWall or Under Cabinet Mounting

FEATURES

ELECTRONICS COR

P .

PICTURE VOLUME CHANNEL P0WER

5" TFT LCD TV

OPEN

AUDIO OX

AV/TV

SENSOR AUTO PRO

-2-

Printer: Leave this page blank

-3-

IMPORTANT SAFETY INFORMATION

1) Always unplug the VE500A prior to cleaning.

2) Use only a damp cloth for cleaning. Do not use liquid cleaners or aerosol cleaners.

3) Use only Audiovox approved power adapter to operate the VE500A.

4) Never overload electrical outlets or use extension cords as this can result in a risk of fire or electric

shock.

5) Do not install the VE500A product where it is likely to be exposed to water. Do not install where there

is a chance of liquid being spilt into or on the VE500A.

6) Do not obstruct the ventilation slots. These ventilation slots are necessary to ensure reliable operation

of the VE500A and protect it from overheating.

7) Do not install the VE500A near or over a source of heat such as a radiator or heat register.

8) The VE500A should not be installed in an enclosed or built-in location such as a bookcase or rack

unless proper ventilation is provided.

9) Never insert objects of any kind into the VE500A through openings as they may touch dangerous

voltage points or short-circuit parts that could result in a fire or electric shock.

10) Do not attempt to service the VE500A yourself. Opening or removing the covers may expose you to

dangerous voltage or other hazards. Refer all servicing to qualified Audiovox service personnel.

11) Unplug the VE500A from the outlet and refer servicing to qualified Audiovox service personnel under

anyofthefollowingconditions:

a) If liquid has been spilled, or an object has fallen into the TV.

b) If the TV has been exposed to water.

c) If the TV does not operate normally when following the operating instructions.

d) If the TV has been dropped or the cabinet has been damaged.

-4-

INCLUDED IN THIS KIT

1 VE500A 5-InchTelevision (P/N 136D2179) (1)

2 Remote Control (P/N 136B2180) (1)

3 AC/DC Power Adapter [email protected] (P/N 1541096) (1)

4 Mountingtemplate (1)

5 Hardware Bag(P/N1502177) (1)

A) 10 - 32 x 2 1/2 Mounting screws (P/N 1001896) (4)

B) 10 - 32 x 3/4 Mounting screws (P/N 1001897) (4)

C) 10 - 32 x 1 3/4 Mounting screws (P/N 1001898) (4)

D) 3/4” Spacer (P/N 1023316) (4)

E) 1/2” Spacer (P/N 1023317) (4)

F) 5/16” Spacer (P/N 1023318) (4)

G) Countersunk washer (P/N 1023319) (4)

H) Self Adhesive Wire mounting clip (P/N 1023320)(2)

TOOLS REQUIRED

Philips head screwdriver

Centerpunch

1/4” Drill bit

Electric Drill

AdhesiveTape

23a



PIC TUR E VOL UME CHA NNEL P0W ER

5" TFT LCD TV

OPEN

AUDIO OX

AV/TVSENSOR AUTOPRO

PICTURE

SELECT

01--

TVPOWER

MEMORY

AUTO

VOL

MUTE

CH3

TV/CATV

-5-

1) Chooseanappropriatemounting location underneath a cabinetorshelf. Closeproximitytoanelectricaloutlet

andaTVantennaorcableconnectionwillfacilitateaneat,easyinstallation. Donot mount the VE-500A above

arangeoroven. Besure that the location chosenwillprovideadequateaccesstotheelectricalconnectors on

therear of the unitbeforecontinuing.

2) If the locationchosenhas bottom edge moldingitmay be necessarytousethe mounting spacersprovidedto

effectivelylowertheVE-500A’srotatingscreenbelowthemolding. Measurethedistancebetween the bottom

ofthemoldingandthebottomofthecabinet. Amaximummeasurementof1.5”canbeaccommodatedwithout

usingspacers. Forlarger moldings choose acombinationofspacerswhich will reduce themountingdepthto

1.5” or less.

3) Measure the thickness of the bottom of the cabinet or shelf and the spacers chosen. Select the shortest

screwlengthwhich will passthroughthecountersunkwasher, kitchen cabinet andspacerswithbetween1/4”

and 1 1/2” inches to spare

4) Cutoutthetemplate supplied andtapeitinplaceonto the cabinet surfacetobedrilled. Center punchthefour

holesindicated on thetemplateandremove the template.

5) Carefullydrillfour1/4”holesatthelocationsmarked above. Place the screws chosen through the countersunk

washersand then throughtheholesfrom the topdown.

6) Screw the appropriatespacersonto the screws first,thenpositionthe VE-500A and screwitinplace using its

threadedholes.

7) Plug the AC Power adapter into a nearby electrical outlet and into the receptacle marked DC 12v input at the

rearofthe VE-500A

8) Connect your TV antenna or cable system to the antenna connector on the rear of the VE-500A.

9) Route the wiressafelyawayfromheatandmoisturesources and secure theminplaceusingtheselfadhesive

wiremountingclipprovided.

PICTURE VOLUME CHANNEL P0WER

5" TFT LCD TV

OPEN

AUDIO OX

AV/TVSENSOR AUTOPRO

UNDER CABINET INSTALLATION

Cabinet or

Shelf

Bottom

Edge

Molding

-6-

WALL MOUNT INSTALLATION

AUDIO OX

AUTO PROSENSOR AV/TV PICTURE

CHANNELVOLUME P0WER

VerticalMounting

Slot (Rear of Unit)

Donotattempt to install the VE-500Avertically, unless you aresurethattheelectriccircuitsin the chosen area

have been turned off at the fuse or circuit panel. Failure to do this could result in electric shock.

1) When installing the VE-500A vertically, choose a mounting location at or close to eye level. Close proximity

to an electrical outlet and a TV antenna or cable connection will facilitate a neat, easy installation.

2) Cutoutthe template provided andtemporarilytapeitto the wall atthedesiredlocation. Markthe center ofthe

verticalmountingslot and removethetemplate.

3) Determine if a wall stud is present at the chosen location by drilling a 1/16” hole at the marked location. After

penetratingthe depth ofthewallsurface, observe whether ornota structural stud ispresent. Caution,ifnear

electrical outlet, there is likely to be electrical wiring present.

4) Ifastructuralstud ispresent,asuitablelengthdrywallscrewcanbescreweddirectlyintoit. Leaveapproximately

1/4”of the screwprotrudingfromthe wall.

If there is no structural stud present, a drywall anchor from your local hardware store will be necessary.

Rememberto leave 1/4” ofitsscrewhead protruding fromthewall.

5) Hang the VE-500A onto the screw head using the vertical mounting slot at the rear of the unit.

6) Plug the ACPoweradapter into a nearbyelectricaloutlet and intothereceptaclemarked DC 12vinputonthe

bottomof theVE-500A.

8) Connect your TV antenna or cable system to the antenna connector on the bottom of the VE-500A.

9) Route the wiressafelyawayfromheatandmoisturesources and secure theminplaceusingtheselfadhesive

wiremountingclipprovided.

-7-

FRONT PANEL CONTROLS

1. REMOTE INFRARED SENSOR

This sensor receives signals from the hand

held remote control.

2. AUTO PROG. BUTTON

This button is used to program active TV

stations into memory. Its operation duplicates

thefunctionof theAUTOMEMORY buttonon

the remote control.

3. BLANK

This button not used.

4. PICTURE BUTTON

This button allows setting of the picture Tint,

Contrast, Brightness and Color. Its operation

duplicates the PICTURE SELECT button on

the remote control unit.

5. VOLUME UP/DOWN BUTTONS

Press to increase or decrease the TV sound

level.

6. CHANNEL UP/DOWN BUTTONS

Thesebuttons areusedtochangethechannel

or make adjustments to the picture quality.

Theiroperationduplicates theCHANNEL UP/

DOWN button on the remote control unit.

7. LED POWER INDICATOR

Illuminates whenever power is applied to the

VE-500A

8. POWER BUTTON

This button will alternately turn the VE-500A

on or off.

9. SCREEN RELEASE BUTTON

This button will release the screen from its

closed position, which allows you to lower it

to a comfortable viewing position.

12 4 5 67

OPEN

SENSO R AUTO PR O. PIC TURE VOLUME CHANNEL

-8-

AUDIO

DC DCLINE OUT

INPUT 2INPUT 1

VIDEO

AUDIO

VIDEO DC ANT.

1) 12V DC INPUT

Connectto power adaptersupplied with VE-500A.

2) ANTENNA CONNECTOR

Connecttoantennaorcablesystem.

DC12V

INPUT DC 12V

OUTPUT

REAR PANEL CONNECTIONS

-9-

1) TurntheRemoteControlfacedown. Pressdown ontheridged areaofthe batterycoverandslideitoff.

2) Install thetwo “AAA”batteries includedas shown. Makesure thatproper polarity(+or-)isobserved.

3) Slide the cover back until it clicks.

BATTERY INSTALLATION

-10-

POSITIONING THE SCREEN

Pushing the screen release forward will unlock the screen and it will swing downward. Pivot the

screen forward until a comfortable viewing angle is reached. The screen may also be rotated from

side to side. Do not force the screen beyond its rotational limit of 15 degrees. Once a comfortable

position has been found, the internal detents will hold the screen in this position. The VE-500A is now

ready for use. In vertical mount applications it is not necessary to release and position the screen.

Pressingthepower buttononthe TV ortheremote willturnthe systemonor off. Remember toturn the

unit off and pivot the screen to the locked position when not in use.

The remote control will operate Audiovox Televisions. It is not a universal remote control and will not

control equipment from other manufacturers.

If a universal remote control is to be used with the VE-500A, choose the remote encoding scheme for

Action Televisions when programming the remote.

OPERATION

PICTURE

SELECT

01--

TV POWER

MEMORY

AUTO

VOL

MUTE

CH3

TV/CATV

Inhaltsverzeichnis

Andere Audiovox Fernseher Handbücher

Audiovox

Audiovox FPE6317P Bedienungsanleitung

Audiovox

Audiovox VE706 Betriebsanleitung

Audiovox

Audiovox DBS-30500 Bedienungsanleitung

Audiovox

Audiovox AVT-597 Bedienungsanleitung

Audiovox

Audiovox FPE4217P Bedienungsanleitung

Audiovox

Audiovox LC-37K7 Bedienungsanleitung

Audiovox

Audiovox FPE2705 Bedienungsanleitung

Audiovox

Audiovox AVT-1928 Bedienungsanleitung

Audiovox

Audiovox AVT-597 Bedienungsanleitung

Audiovox

Audiovox VE-560 Bedienungsanleitung

Audiovox

Audiovox FPE2005 Bedienungsanleitung

Audiovox

Audiovox AVT1345 Bedienungsanleitung

Audiovox

Audiovox FPE4216P Bedienungsanleitung

Audiovox

Audiovox FPE3706 - 37" LCD TV Bedienungsanleitung

Audiovox

Audiovox VE726 - 7" LCD TV Service-Handbuch

Audiovox

Audiovox VE926 Service-Handbuch

Audiovox

Audiovox AVT-1940 Bedienungsanleitung

Beliebte Fernseher Handbücher anderer Marken

Toshiba

Toshiba 27A10 Bedienungsanleitung

Philips

Philips 42PF9630A/37 Bedienungsanleitung

Hitachi

Hitachi 32FX48B Bedienungsanleitung

DAEWOO ELECTRONICS

DAEWOO ELECTRONICS DTQ-14V1FC Bedienungsanleitung

Changhong Electric

Changhong Electric uhd55b6000is Bedienungsanleitung

Philips

Philips Matchline 21CE7551 Bedienungsanleitung

Panasonic

Panasonic Genus TX-G10 Bedienungsanleitung

Toshiba

Toshiba 19A20 Bedienungsanleitung

Philips

Philips 25PT4523-16 Bedienungsanleitung

Sony

Sony XBR-100Z9D Bedienungsanleitung

Philips

Philips PR0930X3 Bedienungsanleitung

Philips

Philips Brilliance 231P4QPY Bedienungsanleitung

Samsung

Samsung 55S9 B Series Bedienungsanleitung

Philips

Philips 32HF9385D Fehlerbehebungshandbuch

Philips

Philips Colour Television Bedienungsanleitung

Sharp

Sharp LC-40FI5012E Bedienungsanleitung

Loewe

Loewe Table Stand Reference 55 Bedienungsanleitung

Philips

Philips 32PFH5300 Bedienungsanleitung