English
-9- -10-
5.5.3 Now playing information
When available, the station name and ‘Radio Text’ information will display on the
LCD for the playing station. If no information is available through RDS, just the
frequency and ‘No Radio Text’ message will display.
Press INFO to cycle through: RDS Radio Text, program type, frequency,
mono/stereo and time and date for the current station.
Press and hold the INFO button to return to the default Now Playing screen.
5.6 USB/SD Mode
1. Connect your USB device or SD/MMC card to the unit.
2. Turn Mode Dial to select USB or SD mode, “USB Stick” or “SD Card” will
appear on the screen. The music stored on the USB or SD card will be played
automatically once the content scanning is finished.
3. Press “ OK” button to pause or resume playback.
4. Press “<“ or“ > “button to skip to the previous or next track.
5. Press “PRESET” button to change the repeat mode between Repeat-1 and
Repeat All. The default repeat mode is Repeat All.
5.7 Audio-in Mode
Audio-in mode plays audio from an external source such as an MP3 player, mobile
phone or computer.
1. Use the 3.5mm audio cable to connect from the headphone or line out socket of
your source device to the Audio-In socket on the MB415.
2. Turn the Mode Dial to select AUX mode.
3. Press play on your source device, any sound that would normally play through its
speaker will now play through the MB415.
Note: Volume can be adjusted on either the source device or the MB415.
5.8 Sleep Timer
The Sleep timer function allows you to set the device to automatically shut down
after a specific period of time.
1. Press and hold the MENU button to choose the sleep delay
time, in minutes, from: off /1/20/30/60/90/120.
2. The setting confirms automatically after 10 seconds, the sleep icon " " stops
flashing on the display.
3. Select "Sleep off" to cancel sleep mode. the sleep icon " " disappears
simultaneously.
Note: When the sleep timer is active, press and hold the MENU button to show the
remaining time before the device shuts down.
5.9 Clock Setting
1. Press and hold OK to enter standby.
2. Press and hold MENU until the year begins to flash.
3. Use the arrow keys to edit the values and OK to move through the settings and
save.
4. Press and hold OK to exit.
5.10 Alarm Clock
The alarm clock can be set with two separate wake up times, each alarm can be
configured to buzzer, last active station or preset FM or DAB station. An active
alarm is indicated by a bell icon on the left side of the LCD screen.
5.10.1 Set the Alarm Clock
1. Press and hold OK to enter standby.
2. Press and hold SNOOZE to enter alarm setup.
3. Press SNOOZE to select Alarm 1 or Alarm 2.
4. Press OK to enter Alarm Wizard.
5. Use arrow keys to edit the values and OK to
move through the settings and save.
On time – Hours and minutes
Duration: 15/30/45/60/75/90 minutes. The alarm will automatically stop after the
selected time.
Source – Buzzer / DAB / FM / USB / SD, If DAB or FM is chosen as the audio
source you will also be prompted to select the last played station or one of the
preset stations. If USB or SD are selected, the last played song will be used as the
alarm tone.
Daily / Once / Weekends / Weekdays, set the repeat mode. If Once is selected, you
will be asked to set the date of this alarm.
Alarm: On/Off
Note: When the alarm sounds, it begins quietly and gradually increases in volume
up to the current volume of the radio. To stop the alarm, press and hold the
SNOOZE or Standby button for 3 seconds.
