Aurender ACS10 Bedienungsanleitung
1/4
ACS10 Manual
Instructions
Please read the following instructions carefully before setting up the Aurender Music Player.
• Be careful not to drop the device to avoid internal damage.
• Do not disassemble the device.
• Keep magnetic materials away from Aurender to prevent any damage to data.
• Do not expose device to oil, dust, water, high humidity, or smoke.
• Keep ventilation openings free from obstruction.
• When cleaning, use only a soft cloth. Keep out of contact with water or other liquids.
• All servicing must be performed by a qualied representative, or the warranty will be voided.
• Unplug power cord during severe lightning storms or when unused for a long period of time.
• Unplug the device from the outlet only after completely turning o the unit.
• Always turn the power o before connecting or disconnecting any cables.
• Please note that hard drives can break down.
It is important to back up your music collection periodically to a separate memory device. In the
event of drive failure, Aurender is not responsible for any loss of data. The drive manufacturer
will only replace faulty drives under warranty and do not compensate for any loss of data.
Positioning
• Place your device on a at, horizontal, and stable surface.
• Keep away from heat sources, such as radiators.
• Do not stack other products on top of the Aurender.
• Allow space around the device for ventilation.
• Do not place inside an enclosed cabinet.
Front and Rear Panel
2/4
Front Panel
1. On/O/Standby
In the default mode, pressing will power the unit on and completely o. In the
Standby mode, pressing the front panel button will put the unit into standby, and
the unit will turn on instantly. In standby mode, to turn the unit completely, press
the button once so that it shows the display and press the button again so that it
turns o. Flashing will stop when the unit is o.
2. Display Menu
Press to cycle through 3 display options: Song Information, Playlist and Ripping
Menu. Songs from playlists may be selected using the four buttons on the right side
of the front panel display. Use buttons 4 and 5 to scroll between playlists and button
3 to select a playlist and start to play.
3. Play/Pause
Press to start or stop playback.
4. Play Previous
Press to skip to the previous track.
5. Play Next
Press to skip to the next track.
3/4
1. USB Audio 2.0 Out
2. USB 3.0 Data Port
3. 1GBps Double isolated LAN port
4. 1Gbps LAN port
5. 1Gbps LAN port
6. AC Power Switch
7. AC Power Socket
Connect to a power outlet with AC Power cord.
Rear Panel
https://www.aurender.com/page/manual-acs10 4/4
Copyright © Aurender
Warning
Before connecting audio cables, rst check to see that all devices are grounded using
grounded plugs and grounded sockets. In addition, all devices should be turned o,
before connecting any audio or digital cables. If the devices are not grounded, a voltage
potential dierence between devices can cause a voltage surge through the audio cable
that can weaken and eventually damage sensitive circuits in D/A converters and other
devices.
Connection
Inhaltsverzeichnis
Andere Aurender Server Handbücher
Beliebte Server Handbücher anderer Marken
iRobo
iRobo IPC2U Bedienungsanleitung
Nortel
Nortel 1000 Con?guration guide Bedienungsanleitung
Asus
Asus AP7500 Bedienungs- und Wartungshandbuch
Avid Technology
Avid Technology AirSpeed 5000 Bedienungsanleitung
HP
HP Integrity rx2600 Installationsanleitung
Milestone
Milestone Husky IVO 350T Bedienungsanleitung