AURES Standard USB-C Hub Bedienungsanleitung
Standard USB-C Hub with extended I/O
for AURES YUNO, JAZZ, TWIST and Wincor
iPOS
HUB-RETAIL-KL20
Specifications
Model
Standard USB-C Hub
Front Side
LED
Green when 180W power supply is connected
24V DC Input
4-pin 24V DC input with lock connector x 1
24V DC Output
3-pin with lock connector for thermal printer x 1
24V PoweredUSB port
Max. 2A / port x 1
12V PoweredUSB port
Max. 1.25A / port x 4
DB9 port
RS232 COM A / COM B / COM C / COM D
LAN port
10/100/1000 Base-T x 1
(1) Under YUNO POS / Wincor iPOS configuration, only USB 2.0 x 4
and LAN-A can be used.
(2) Under JAZZ / TWIST POS configuration, USB 2.0 x 4, USB 3.0 x 2
and LAN-B can be used. *LAN-A can't be used!
USB port
USB 2.0 x 4 & USB 3.0 x 2
Cash Drawer port
24 / 12 V Cash Drawer x 1
Cable Clamp
Cable management for USB cable
Left Side
24V DC Output
2-pin 24V DC Jack with screw connector for Wincor iPOS x 1
19V DC Output
4-pin 19V DC output with lock connector for YUNO POS x 1
Cable Clamp
Cable management for USB cable
USB IN port
USB port connect to YUNO POS / Wincor iPOS system via 3-in-1 cable
LAN-A IN port
LAN port connect to YUNO POS / Wincor iPOS system via 3-in-1 cable
USB-C Hold Bracket
Cable management for USB-C cable
USB-C port
USB-C port connect to JAZZ / TWIST POS system via USB-C cable
Rear Side
Cash Drawer Voltage Setting
3-pin pin-header x 2
COM Voltage Setting
4-pin pin-header x 4
Others
Power Supply
100 ~ 240 V AC-in, 180 Watt 24V 7.5A DC-out adapter x 1
1.8m 3-in-1 Cable (Optional)
Power cable (2-pin to 4-pin) x 1, LAN cable x 1 and USB cable x 1
1.5m USB-C Cable (Optional)
USB-C cable x 1
Color / Material
Black Matte / SPCC
Certification
CE, LVD, FCC and RCM
Dimension
300 x 125 x 43 mm (11.81 x 4.92 x 1.69 inches)
Weight
0.7 kg (1.54 lb.)
Environmental
Operating Temperature
-20 ~ 40°C (-4 ~ 104°F)
Storage Temperature
-40 ~ 85°C (-40 ~ 185°F)
Relative Humidity
95% at 40°C (104°F), non-condensing
*All trademarks and copyrights are the property of their respective owners.
**Content is subject to change without prior notice.
SAFETY INSTRUCTIONS
To disconnect the product from the
electrical Power Supply, remove the
power cable plug from the wall socket.
The wall socket must be easily
accessible and in close proximity to the
product.
Read these instructions carefully. Save
these instructions for future reference.
Follow all warnings and instructions
marked on the product.
Do not use this product near water.
Do not place this product on an
unstable cart, stand, or table. The
product may fall, causing serious
damage to the product.
Only use power supply unit and cables
released by AURES.
Do not allow anything to rest on the
power cord. Do not locate this product
where persons will walk on the cord.
Never spill liquid of any kind on the
product.
WEEE Notice
The WEEE mark applies only to
countries within the European
Union (EU) and Norway.
This appliance is labeled in accordance
with European Directive 2002/96/EC
concerning waste electrical and
electronic equipment (WEEE). The
Directive determines the framework
for the return and recycling of used
appliances as applicable throughout
the European Union. This label is
applied to various products to indicate
that the product is not to be thrown
away, but rather reclaimed upon end of
life per this Directive.
Front Side
Standard USB-C Hub is an innovative
PoweredUSB Hub with extended I/O for
YUNO / JAZZ / TWIST POS and Wincor iPOS,
which allows you to enjoy versatile POS
peripherals.
Features :
- Empower AURES YUNO POS and Wincor
iPOS via foolproof design 3-in-1 cable
(Power + LAN + USB) as well as AURES JAZZ
and TWIST POS via USB Type C cable with
PoweredUSB feature
- Power ON with connected POS
- Built-in microcontroller to provide standard
COM port access
- Built-in cable clamp / hold bracket to avoid
cable loosen
- Flexible mounting bracket to ease fixation
Serial Port Pin and Signal Assignments :
Pin
Signal Name
Pin
Signal Name
1
Data Carrier Detect
6
Data Set Ready
2
Received Data
7
Request to Send
3
Transmitted Data
8
Clear to Send
4
Data Terminal Ready
9
Ring Indicator*
5
Signal Ground
*Ring(Default) / +5V /+12V selected by jumper
Technical Support
The AURES Group thanks you for your loyalty.
To download our most recent drivers and utilities
and obtain advice regarding the installation of
y o u r e q u i p m e n t , p l e a s e v i s i t t h e A U R ES
T e c h n i c a l S u p p o r t W e b s i t e :
www.aures-support.fr/UK
Left Side
CAUTION : DO
NOT connect the
180W power
plug here.
Rear Side
*Voltage Settings of Cash Drawer and COM ports are behind the service door.
Configure the voltage settings of Cash Drawer and each COM port if necessary.
Default setting :
Cash Drawer at 24V
COM port at N/A
CAUTION : Turn the machine off
before configuring the voltage setting
How to mount?
Mount either at top or side with four included M3 screws.
Andere AURES Schalten Handbücher
