AURES JAZZ-BASE151 Bedienungsanleitung

Rev.B Mar20

USER'S MANUAL

JAZZ-BASE151/JAZZ-KIOSK-BASE l ART-04XXX

JAZZ-BASE151-BLACK / JAZZ-BASE151-WHITE

JAZZ-KIOSK-BASE151-BLACK/JAZZ-KIOSK-BASE151-WHITE

FCC Notice

FCC Statement

This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at

his own expense.

This equipment complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions: (1) This device may not cause harmful interference,

and (2) This device must accept any interference received, including interference

that may cause undesired

operation.

Caution:

The manufacturer is not responsible for any radio or TV interference caused by

unauthorized modications to this equipment. Such modications could void the

user authority to operate the equipment.

CAUTION:

Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used

Batteries According to the Instructions.

CE Notice

This device complies with 2014/30/EU “EMC Directive “ and 2014/35/EU “Low

Voltage Directive” issued by the Commission of the European Community.

WEEE Notice

The WEEE mark applies only to countries within the European Union (EU)

and Norway. This appliance is labeled in accordance with European Directive

2002/96/EC concerning waste electrical and electronic equipment (WEEE).

The Directive determines the framework for the return and recycling of used

appliances as applicable throughout the European Union.

This label is applied to various products to indicate that the product is not

to be thrown away, but rather reclaimed upon end of life per this Directive.

Safety

IMPORTANT SAFETY INSTRUCTIONS

To disconnect the machine from the electrical Power Supply, turn off the

power switch and remove the power cable plug from the wall socket.

The wall socket must be easily accessible and in close proximity to the

machine.

Read these instructions carefully. Save these instructions for future

reference.

Follow all warnings and instructions marked on the product.

Do not use this product near water.

Do not place this product on an unstable cart, stand, or table. The product

may fall, causing serious damage to the product. Slots and openings in

the cabinet and the back or bottom are provided for ventilation; to ensure

reliable operation of the product and to protect it from overheating. These

openings must not be blocked or covered. The openings should never be

blocked by placing the product on a bed, sofa, rug, or other similar surface.

This product should never be placed near or over a radiator or heat

This product should be operated from the type of power indicated on the

marking label. If you are not sure of the type of power available, consult

your dealer or local power company.

Do not allow anything to rest on the power cord. Do not locate this product

where persons will walk on the cord. Never push objects of any kind into

this product through cabinet slots as they may touch dangerous voltage

points or short out parts that could result in a re or electric shock. Never

spill liquid of any kind on the product.

Warning - If using Class I adapter, power cord shall be connected to a

socket-outlet with earthing connection.

Table of Contents

Package Overview ................................................................................................ 2

Product Overview ................................................................................................. 3

Specication .......................................................................................................... 4

How to install the Processor Module ..................................................................... 6

How to Access Power and USB-C Monitor Cables ............................................... 7

How to install the WIFI Dongle ............................................................................. 8

Attaching the 2nd Display...................................................................................... 9

Attaching the MSR............................................................................................... 10

Attaching the EMV Reader...................................................................................11

Attaching the iButton Reader............................................................................... 12

Removing the 2nd Display................................................................................... 13

Removing the MSR ............................................................................................. 14

Removing the EMV Reader................................................................................. 15

Removing the iButton Reader ............................................................................. 16

I/O Connection..................................................................................................... 17

Product Dimensions ............................................................................................ 18

Appendix A: Driver Install .................................................................................... 19

JAZZ-BASE151

JAZZ-KIOSK-BASE151(w/o stand)

Power Cord

RJ-50 to DB-9M Cable x 2

DC Power Supply

Package Overview

2nd Display

(Optional)

EMV Reader

(Optional)

MSR

(Optional)

iButton Reader

(Optional)

User Manual

Product Overview

JAZZ-BASE151 is an 15 inch touch display module designed for point of

sale applications.

• Front View

(stand is option)

• Bottom View

Model Name JAZZ-BASE151/JAZZ-KIOSK-BASE151

CPU support Intel®

BayTrail

Processor J1900

(2M Cache,

up to 2.42 GHz)

Intel® Core™

Skylake

i3-6100U Processor

(3M Cache,

2.30 GHz)

Intel® Core™

Kabylake

i5-7300U Processor

(3M Cache,

up to 3.50 GHz)

System Memory

1 x SO-DIMM

DDR3L

4GB Std Max 8GB

DDR4

4GB Std Max 16GB

BIOS AMI uEFI BIOS

LCD Panel

LCD Size 15" (AUO G150XTN03.8)

Brightness 400 cd/m²

Maximal resolution 1024 x 768

Aspect Ratio 4:3

Backlight Type LED

LED Life Time 60,000 Hours (min.)

Touch Sensor

P-CAP Touch

Touch Screen 10 points

Controller IC EETI 3188

Interface USB

Storage

SSD Two M.2 2280 Slots, one 128GB SSD Std

Monitor System

Power button 1 x with Power indicator (Blue color when power ON)

USB 4 x Type-C female

*From CPU BOX by one (DP + USB3.0)

*Accessory device Left said by one (USB2.0 only, 5V/0.5A)

*Accessory device Right said by one (USB2.0 only, 5V/0.5A)

*2nd Display up said by one (USB2.0 only, 5V/1.5A)

1 x Type-A female

*USB2.0 only(5V/0.5A)

Speaker Output Mono 2W

IO BOX

DC-IN jack 1 x 2.5Ф jack connector for 19VDC input

USB 6 x Type-a USB3.0

Serial / COM

2 x RJ50 connector with RJ50 to DB9 cable for RS-232 port

(Provide power)

LAN 1 x RJ45 port for Gigabit Ethernet, support Wake on LAN

USB-C Ports One to Display, One for general use, Video support for

HDMI, VGA and/or USB 3.0 and other USB-C adapters

Specication

Power

Power Adapter External 19V / 3.42A 65Watt Adapter

Certications

EMI FCC Class A / CE

Environment

Operating

Temperature

0-40°C

Storage

Temperature -20°C-60°C

Humidity 5%-80% non-condensing

Dimension

(W x D x H)

LCD 0 degree :

517.44 x 54.08 x 313.31mm

Weight

(N.W./G.W.)

5.4kg / 7.1kg(JAZZ-BASE151)

2.3kg / 3.8kg(JAZZ-KIOSK-BASE151)

OS support

J1900/i3

Windows® 7 Professional for Embedded Systems,

Windows® Embedded POSReady 7, Windows® 10, Linux

OS support i5 Windows® 10, Linux

* This specication is subject to change without prior notice.

How to install the Processor Module

1. Lay the LCD at on a clean even surface.

2. Move the stand into position as shown in the step 2 diagram.

3. Remove the back cover as seen in the step 3 diagram.

4. Insert the Processor Module as seen in the step 4 diagram.

5. To connect the USB cable to Processor Module per step 5 diagram.

6. Replace the back cover as shown in the step 6 diagram.

How to Access Power and USB-C Monitor Cables

1. Lay the LCD at on a clear even surface.

2. Remove the 4 screws to remove the stand bottom cover as seen in the

step1 diagram.

3. Connect the USB-C and power cable to the appropriate connectors as seen

in the step 2 diagram.

4. Replace the stand cover and tighten 4 screws as seen in the step 3 diagram.

5. Keep additional cables in order by using the cable mount as seen in the

step 4 diagram.

Andere Handbücher für JAZZ-BASE151

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere AURES Touch-Terminal Handbücher

AURES

AURES TWIST-MB-1900 Bedienungsanleitung

AURES

AURES NINO II Bedienungsanleitung

AURES

AURES YUNO-151 Bedienungsanleitung

AURES

AURES Odysse II Bedienungsanleitung

AURES

AURES TEOS WIDE Bedienungsanleitung

AURES

AURES TRX 3000 Bedienungsanleitung

AURES

AURES TRX 3000 Bedienungsanleitung

AURES

AURES TMC 7000 Fehlerbehebungshandbuch

AURES

AURES TMC 7200 Bedienungsanleitung

AURES

AURES YUNO II Bedienungsanleitung

AURES

AURES YUNO-K170-BLACK Bedienungsanleitung

Beliebte Touch-Terminal Handbücher anderer Marken

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung

Ingenico

Ingenico AXIUM EX4000 Bedienungsanleitung

Heisei Electronics

Heisei Electronics Q-POS 815 Bedienungsanleitung

Amano

Amano MTX-15 Bedienungsanleitung

FLOWBIRD

FLOWBIRD CWT Compact Touch Bedienungsanleitung

Demco

Demco SP7 Bedienungsanleitung

Lathem

Lathem PC600 Series Bedienungsanleitung

Partner

Partner MF-2352 Bedienungsanleitung

NCR

NCR RealPOS 7460-2 Handbuch

Simrad

Simrad MS50 Montageanleitung

Unitech

Unitech MR350 MKII Kurzanleitung

Jungheinrich

Jungheinrich WMT 210 Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungsanleitung

YASKAWA

YASKAWA 62H-MDC0 Bedienungsanleitung

MVG industries

MVG industries NeptuLink Bedienungsanleitung

Price Industries Limited

Price Industries Limited FDC Gebrauchsanweisung

Honeywell

Honeywell TemaKey Bedienungsanleitung

EBN

EBN BPC65-B-A16G Bedienungsanleitung