Aurora AS810SD Series Bedienungsanleitung

AS810SD

Model No.

Modèle No.

1-800-327-8508

USA Only • Etats Seulement

1-310-793-5650

International • International

Email: [email protected]

For more information, please visit us at:

www.auroracorp.com

Shredder User Manual

Please read these operating instructions before using the unit.

Avant d’utiliser cet appareil, veuillez lire toutes les instructions.

Manuel d'utilisateur de défibreur

3ENGLISH

WARNING:SAFETY INSTRUCTIONS, READ BEFORE USING!

Read instructions before use.

Avoid touching the document

feed opening with hands.

Product is not intended for use by

children (product is not a toy).

Do not insert foreign objects into

the paper entry slot.

Do not spray or keep any

aerosol products in or around the

shredder.

Keep loose clothing or jewelry

away from the paper entry slot.

Avoid getting hair near the

paper entry slot.

•AlwaysturntheshredderoffandunplugthepowercordfromtheACoutletwhen

notinuse,beforecleaningit,movingit,oremptyingthewastebasket.

•RISKOFFIRE-Seriousinjury,lossordamagemayoccur. Never use any petroleum based

or flammable oils, spray can oil or lubricants, or any aerosol products in or around the machine as

some oils can combust causing serious injury.

•NEVER dispose of flammable chemicals or materials that have come into contact with flammable

chemicals (for example, nail polish, acetone and gasoline) in the shredder basket.

•Nevershredlargepaperclips,windoworinsulatedenvelopes,continuousforms,

newsprint,boundpages(inexample:notepads,checkbooks,magazines,etc...),

transparencies,laminateddocuments,cardboard,anyitemswithadhesives,hard

materialsorplastic(exceptCreditCardsandCDs).

•DonotholdCD/DVDwithfingerthroughthecenterringwhilefeedingintotheshredder.

Seriousinjurymayoccur.

•A socket-outlet should be near the equipment and be easily accessible.

•Never let the wastebasket become full. This will lead to shredded material being pulled back up into

the shredder and cause jams.

•Never place the shredder near water or any heat source.

•Do not use the shredder if the power cord is damaged in any way.

•Do not attempt to service this product yourself as doing so may expose you to sharp cutting blades

and/or electricity and will void the manufacturer's warranty.

•Never try to clean or clear the shredder blade.

•Never shred beyond the specified sheet capacity. This may result in extensive damage to the machine.

4ENGLISH

PaperShredder

OperatingInstructions

Installation

Operation

Maintenance

Troubleshooting

*ONEFOLDEDSHEETOFPAPEREQUATESTO2SHEETSOFPAPER

Heavier paper, humidity or other than rated voltage may reduce shredding capacity.

Sheet Capacity

Paper Shred Size:

Paper Feed Entry Width

Credit Card & CD Capacity

Duty Cycle

Voltage

8 Sheets of 20 lb. bond paper*

1/4” (0.65 cm) wide strips

CD: 4 pieces (1 3/8 in)

8.7" (22 cm)

Only one per pass

2 min. on / 15 min. off

120V~60Hz / 1.2 A

INSTALLATION

1. Mount the shredder securely to the rim of the waste basket. (FIGURE 1)

2. A socket-outlet should be near the equipment and be easily accessible.

3. Connect the power cord to any standard 120 volt AC outlet.

Shredders may have very sharp exposed blades on the underside.

Use care when mounting the shredder on the wastebasket.

!Caution:

FIGURE1

OPERATION

5ENGLISH

OPERATION

ControlSwitch

Using the switch located on the unit, select one of the following settings

by sliding the switch either left or right. (FIGURE 2)

IAUTO:

This setting allows the shredder to be automatically started by inserting paper into the feed slot. Al-

ways feed the paper in as straight as possible. When the paper has passed through, the shredder

will automatically stop.

OOFF:

This setting turns off all features of the shredder. For safety reasons, we recommend that you leave

the shredder in the “Off” position whenever the shredder is unattended or not in use.

RREV(REVERSE):

In the unlikely event of a paper jam, the reverse setting can be used to help clear the cutters of

paper that did not pass through. Never attempt to clear a jam by using the reverse function until

you have emptied the wastebasket.

JAMREMOVER/CDDESTROYER:

The forward setting can also be used to help clear the cutters in the event of a paper jam.

This allows to manually activate the shredder into cutting mode.

CONTINUED NEXT PAGE

FIGURE2









6ENGLISH

NOTE:

•Always turn off and unplug the shredder when not in use.

•This shredder will shred staples and small paper clips. It is recommended that you remove paper

clips whenever possible to extend the lifespan of your shredder.

•Only shred credit cards by feeding them vertically i nto the middle of the entry, releasing when shred

ding begins. Never feed more than one credit card at a time.

•Overfeeding the shredder: Shredding beyond the specified sheet capacity can result in extensive

damage to the shredder. Overfeeding will strain the machine and quickly wear and break the cut-

ting blades and internal components.

•Overheating with extended use: In the event that the shredder has shred continuously beyond the

maximum running time and overheating, the unit will automatically shut off. If this happens, switch

the shredder Off for 15 minutes or longer before resuming normal operation.

OPERATION

 Make sure you do not exceed sheet

count per pass (8 sheets max).

Insert paper as straight as pos-

sible into feed slot and release.

Insert one credit card at a time into

the middle of the feed slot.

Lift safety cover to expose the CD/DVD entry. Press the CD Destroyer/

Reset button to activate the shredding feature. Hold the CD/DVD by the

edge and feed one at a time into the slot. You may have to gently push

the disc down to engage the cutting blades. Release the button once the

entire CD/DVD has passed through and destroyed. Close cover when

done shredding media.

•Ready(PowerOn):

The Green LED light indicates the shredder is “On” and ready

to operate when paper is inserted.

•Overheat:

Red light – Shredder has shred continuously beyond the maximum shred time and needs to cool

down before operation can restart. If this happens, switch the shredder off for 15 minutes or longer

before resuming normal operation.

Ready(PowerOn)/

Overheat

LEDStatusIndicators:

Paper/CDs/CreditCardEntry:

7ENGLISH

MAINTENANCE

Warning:Failuretoproperlymaintainyourshredderwillvoidthewarranty.

Oil the shredder blades every month with basic vegetable, cooking oil or shredder oil. Follow oiling

procedure below (FIGURE 3). It helps to keep the shredder blades operating well over many years of

use.

Oilingprocedure:

1. Turn off shredder.

2. Apply shredder oil across paper entry.

3. Turn shredder in reverse mode for 3~5 seconds.

Note:lubricatingoilisNOTincluded.

• Donotsprayorkeepanyaerosolproducts

inoraroundshredder.

• DONOTUSECANNEDAIRONSHREDDER.

CLEANING:

• ALWAYS UNPLUG THE SHREDDER BEFORE CLEANING!

• Only clean the shredder by carefully wiping the unit with a dry soft cloth or towel.

• Do not clean or immerse shredder in water. Having the unit wet may result in damage or malfunction to

the electrical components. If the shredder happens to get wet, be sure to completely dry the unit immedi-

ately with a cloth or towel.

• Never use anything flammable to clean the shredder. This may result in serious injury or damage to the product.

FIGURE3

Shredder

Oil

DONOTUSE

AEROSOLPRODUCTS!

!Caution:

8ENGLISH

TROUBLESHOOTING

CONTINUED NEXT PAGE

If there is a problem with your shredder, check below for the symptoms and steps to resolve. If you

continue to have problems, contact customer support at our Service Center. DO NOT ATTEMPT TO

REPAIR BY OPENING THE SHREDDER HEAD. This will completely void the product warranty.

Theshredderdoesnotworkatall.

1)Make sure the unit is pluggedin and that the outlet is in good working order.

2) Overheatingwithextendeduse: In the event that the shredder has shred continuously

beyond the maximum running time and overheated, the unit will automatically shut off. If this hap-

pens, switchtheshredderOfffor15minutes or longer before resuming normal operation.

3) If using a plastic bag to line the wastebasket, please remove it. This may cause the shredder not to

operate properly.

4) The activation sensor of the shredder is located near the center of the feed slot. Be sure to feed

directly into the center area to activate the machine (especially applies to smaller pieces of paper

or credit cards).

Theshredderrunsin“Rev(Reverse)”modebutnotin“Auto(On)”mode.

While in “Auto” mode, the motor will not start running until paper is inserted into the feed slot. Set the

unit to “Auto” and insert paper to shred. The sensor that activates the shredder in Auto mode is located

directly in the center of the slot. If the paper you are inserting is narrow, it may not be activating the

optical sensor. It is also possible that the feed slot has become blocked with paper. Insert an index card

or any rigid sheet of cardstock (old greeting card or folded file folder), directly in the center of the feed

slot, while applying force to help push the jammed paper through. This will usually clear any paper

blockage.

Howtoclearapaperjamintheshredder.

1) Switch the shredder over into Reverse (REV) mode. While in Reverse, the shredder will back up and

loosen the jammed paper. If required, you may need to tug and remove several sheets to effectively

clear the machine. When jammed paper is loosened or removed, switch back to the Auto-On mode

to continue shredding. Repeat steps if needed.

2) With stubborn situations where the reverse function does not help, you may loosen the jammed

paper with shredder oil (cooking oil is acceptable, nothing aerosol). Start by drizzling oil into the

feed slot where the paper is jammed. Let it soak for about 30 minutes to completely saturate. Return

the shredder back to Auto-Onmode. Ifrequired,anindexcardorarigidsheetof

cardstock(oldgreetingcardorfoldedfilefolder)canbefedintotheshredderto

helppushthejammedpaperthrough.

TROUBLESHOOTING

9ENGLISH

TROUBLESHOOTING

Theshredderisconstantlyrunningwhilein“Auto(On)”mode.

1) It is possible that the activation sensor, which starts the shredder, has become blocked with paper.

Insert an index card or any rigid sheet of cardstock (old greeting card or folded file folder), directly

in the center of the feed slot, while applying force to help push the jammed paper through. This will

usually clear any paper blocking the activation sensor and feed entry.

2) The activation sensor is being triggered by dust, debris, or oil. A cotton swab may be

used to clean the sensor. DO NOT USE CANNED AIR. The activation sensor of the shredder is

located around the center of the feed entry.

Powerswitchinautoposition

Usethickpaperstockorgreetingcard

topushthejamthrough

10 ENGLISH

If you have any questions in regards to the operation of this shredder or in need of a spare part, please

contact our service center at:

Aurora Corp. of America

Telephone: 1-800-327-8508(U.S.A.only)or1-310-793-5650(International)

Business hours: Monday to Friday 8:00 am - 5:00 pm PST (Pacific Standard Time)

Email: [email protected]

Or for more information, please visit our website at http://www.auroracorp.com

Aurora warrants the cutting cylinders of the machine against defects of workmanship and material for a

period of 3years from the original purchase date to the original consumer. Aurora warrants all other

parts of the machine against defects of workmanship and material for a period of 1year from the

original purchase date to the original consumer.

Should there be a defect or malfunction of this product, Aurora will repair or replace the product free

of charge. Customer is responsible for all shipping charges to return the defective product to Aurora. A

copyoftheproofofpurchaseshowingoriginalpurchasedateisrequired. This warranty

is void if the product has been subject to damage, unreasonable use, improper service, or other causes

not arising from defects in original material or workmanship. This warranty is void if factory seal is bro-

ken or removed from the product. This warranty does not include adjustments, parts or repairs required

by circumstances beyond the control of Aurora.

There are no expressed warranties other than those stated herein.

Any expressed or implied warranties, including but not limited to merchantability and fitness for a par-

ticular purpose are limited to the above warranty period. Aurora shall not be liable for any incidental

or consequential cost, expenses or damages resulting from any failure defect or malfunction of this

product.

Some states do not allow the exclusion of limitations of implied warranties or consequential damages,

therefore, the above limitations may not apply to you.

This warranty grants you specific legal rights, and you may also have other rights that vary from state to state.

Beforereturninganyproduct,pleasecallourServiceCenterforspecificreturninstructions.

AuroraCorp.ofAmerica:1-800-327-8508USAONLY

1-310-793-5650INTERNATIONAL•[email protected]

SERVICECENTER

LIMITEDPRODUCTWARRANTY

Andere Handbücher für AS810SD Series

Inhaltsverzeichnis

Sprachen:

Andere Aurora Aktenvernichter Handbücher

Aurora

Aurora AU120MB Bedienungsanleitung

Aurora

Aurora AS662C Bedienungsanleitung

Aurora

Aurora JamFree ShredSafe AU800MA Bedienungsanleitung

Aurora

Aurora AU680MB Bedienungsanleitung

Aurora

Aurora AS810SD Series Bedienungsanleitung

Aurora

Aurora ShredSafe AU740XA Bedienungsanleitung

Aurora

Aurora Mainstays WM-5S Bedienungsanleitung

Aurora

Aurora AS890C Series Bedienungsanleitung

Aurora

Aurora AU1085MA Bedienungsanleitung

Aurora

Aurora C1210 Series Bedienungsanleitung

Aurora

Aurora AU870MA Bedienungsanleitung

Aurora

Aurora AU2025XA Bedienungsanleitung

Aurora

Aurora AU1215XB Bedienungsanleitung

Aurora

Aurora ShredSafe AU1050XA Bedienungsanleitung

Aurora

Aurora AU200MA Bedienungsanleitung

Aurora

Aurora WM675XB Bedienungsanleitung

Aurora

Aurora JamFree TouchGuard AU1630XA Bedienungsanleitung

Aurora

Aurora AU1830XA Bedienungsanleitung

Aurora

Aurora AS610C Bedienungsanleitung

Aurora

Aurora ShredSafe AU1530XB Bedienungsanleitung

Aurora

Aurora ShredSafe AU1200XD Bedienungsanleitung

Aurora

Aurora AU2260XA Bedienungsanleitung

Aurora

Aurora WM830XA Bedienungsanleitung

Aurora

Aurora AS618SB Bedienungsanleitung

Beliebte Aktenvernichter Handbücher anderer Marken

Swingline

Swingline STACK-AND-SHRED200X&200XL 60X Bedienungsanleitung

GBC

GBC ShredMaster CC055 Bedienungsanleitung

UNITED OFFICE

UNITED OFFICE UAV 190 A1 Bedienungsanleitung

Rexel

Rexel Optimum AutoFeed+ 45X Bedienungsanleitung

Martin Yale

Martin Yale 227284S1 Bedienungsanleitung

Bonsaii

Bonsaii DocShred C223-A Bedienungsanleitung

HSM

HSM Pure 740 max Bedienungsanleitung

TRU RED

TRU RED TR-BMC20A Bedienungsanleitung

Fellowes

Fellowes 50S Bedienungsanleitung

GBC

GBC SHREDMASTER 1236SE Bedienungsanleitung

Gude

Gude GH 2600 P Bedienungsanleitung

Ativa

Ativa DQ80M Bedienungsanleitung

Q-Connect

Q-Connect Q8CC Bedienungsanleitung

Fellowes

Fellowes POWERSHRED C-325CI Bedienungsanleitung

Olivetti

Olivetti Privacy 5000C Kurzanleitung

Dahle

Dahle paperSAFE 22022 Bedienungsanleitung

Formax

Formax OnSite FD 87 Bedienungsanleitung

GEHA

GEHA Home & Office S7 CD Bedienungsanleitung