Aurora ShredSafe AU1250XB Bedienungsanleitung

AU1250XB

Model No.

Modelo No.

1-800-327-8508

USA Only • Los Estados Unidos Solomente

1-310-793-5650

International • Internacional

Email: [email protected]

For more information, please visit us at:

www.auroracorp.com

Shredder User Manual

Please read these operating instructions before using the unit.

Antes de operar esta unida, por favor lea todas las instrucciones.

Manual del usuario de la trituradora

™

3ENGLISH

WARNING:SAFETY INSTRUCTIONS, READ BEFORE USING!

Read instructions before use.

Avoid touching the document

feed opening with hands.

Product is not intended for use by

children (product is not a toy).

Do not insert foreign objects into

the paper entry slot.

Do not spray or keep any

aerosol products in or around the

shredder.

Keep loose clothing or jewelry

away from the paper entry slot.

Avoid getting hair near the

paper entry slot.

•AlwaysturntheshredderoffandunplugthepowercordfromtheACoutletwhen

notinuse,beforecleaningit,movingit,oremptyingthewastebasket.

•RISKOFFIRE.Neveruseanypetroleumbasedorflammableoilsorlubricants in or

around the machine as some oils can combust causing serious injury.

•NEVER dispose of flammable chemicals or materials that have come into contact with flammable

chemicals (for example, nail polish, acetone and gasoline) in the shredder basket.

•Nevershredlargepaperclips,windoworinsulatedenvelopes,continuousforms,

newsprint,boundpages(inexample:notepads,checkbooks,magazines,etc...),

transparencies,laminateddocuments,cardboard,anyitemswithadhesives,hard

materialsorplastic(exceptCreditCards).

•A socket-outlet should be near the equipment and be easily accessible.

•Never let the wastebasket become full. This will lead to shredded material being pulled back up into

the shredder and cause jams.

•Never place the shredder near water or any heat source.

•Do not use the shredder if the power cord is damaged in any way.

•Do not attempt to service this product yourself as doing so may expose you to sharp cutting blades

and/or electricity and will void the manufacturers warranty.

•Never try to clean or clear the shredder blade.

•Never shred beyond the specified sheet capacity. This may result in extensive damage to the machine.

4ENGLISH

INSTALLATION

PaperShredder

OperatingInstructions

Installation

Operation

Maintenance

Troubleshooting

Service Center

Limited Warranty

*ONEFOLDEDSHEETOFPAPEREQUATESTO2SHEETSOFPAPER

Heavier paper, humidity or other than rated voltage may reduce shredding capacity.

Sheet Capacity

Paper Shred Size

Paper Entry Width

Credit Card Capacity

Duty Cycle

Voltage

12 Sheets of 20 lb. bond paper*

3/16 in. x 2 5/32 in. pieces

0.5 cm x 5.5 cm pieces

8.7 in / 220 mm

1 at a time

5 min. on / 30 min. off

120V~60Hz / 3.0 A

1. Make sure the basket door is securely closed shut. This shredder features a safety power cut off and

will not operate if door is open. Shredders with pull-out wastebaskets feature a safety power cut off

upon bin removal. The supplied wastebasket activates this switch, which allows the shredder to be

operable.

2. Attach 4 caster wheels to the bottom of the shredder body.

3. A socket-outlet should be near the equipment and be easily accessible.

4. Connect the power cord to any standard 120 volt AC outlet.

Crosscut shredders have very sharp exposed blades on the underside.

Use care when mounting the shredder on the wastebasket.

!Caution:

Remove the shredder from the box.

1Carefully lift and remove shredder head

and casters from the shredder body.

CONTINUED NEXT PAGE

INSTALLATION

5ENGLISH

INSTALLATION

4 5

Attach 4 caster wheels to the bottom of the shredder body.

Gently place the shredder head onto the

shredder body.

Make sure the shredder head is correctly

mounted.

PUSH

DOWN

PUSH

DOWN

CORRECT FIT

6ENGLISH

OPERATION

ControlSwitch

Using the switch located on the unit, select one of the following settings by sliding the switch either left

or right. (FIGURE 1)

I AUTO/ON:

This setting allows the shredder to be automatically started by insert-

ing paper into the feed slot. Always feed the paper in as straight

as possible. When the paper has passed through, the shredder will

automatically stop.

READY:The green LED light indicates the shredder in “On” and

ready for use.

O OFF:

This setting turns off all features of the shredder. For safety reasons,

we recommend that you leave the shredder in the “Off” position

whenever the shredder is unattended or not in use.

R REV(REVERSE):

In the unlikely event of a paper jam, the reverse setting can be used

to help clear the cutters of paper that did not pass through. Never

attempt to clear a jam by using the reverse function until you have

emptied the wastebasket.







CONTINUED NEXT PAGE

FIGURE1

7ENGLISH

CONTINUED NEXT PAGE

OPERATION

Paper/CreditCardEntry:

ShredSafe™ technology is an added safety feature incorporated in this particular

model. It is a new technology where the shredder is able to detect forced entry and

automatically cuts the power off, preventing further shredding.

To begin shredding, locate the control switch on the unit and select the “Auto” mode. The Green LED

light indicates the shredder is “On” and ready to use. Press the designated “PUSH OPEN” area on the

handle of the cover to open and expose the paper feed slot (FIGURE 2). Thecoverwillclickinto

apresetpositionwherethe“SHREDDERSTATUS”linemustalignwiththe“READY”

setting.

READY:

TheshredderiscurrentlyonSTANDBYandreadytooperatewhenpaperisinserted.

With the feed slot now exposed, you can shred sheets of paper or 1 credit card per pass.

DISABLED:

The safety feature has been activated. All power to the SHREDDER

IS CURRENTLY SHUT OFF AND WILL NOT OPERATE until the cover

is returned to the “READY” setting. The cover has been opened

beyond the safe position (FIGURE 3).

AFTERUSE:

When shredding is completed, you can press the designated

“PUSH CLOSE” area on the cover to tilt shut the paper feed slot

(FIGURE 4). It is recommended to have the paper feed slot closed

when shredder is not in use to prevent any objects from accidentally

getting into the feed slot.

FIGURE2

FIGURE3

FIGURE4

8ENGLISH

NOTE:

•Always turn off and unplug the shredder when not in use.

•This shredder will shred staples and small paper clips. It is recommended that you remove paper

clips whenever possible to extend the lifespan of your shredder.

•Only shred credit cards by feeding them vertically into the middle of the entry, releasing when shred

ding begins. Never feed more than one credit card at a time.

OPERATION

•PowerOn:

The Green LED light indicates the shredder is “On” and ready to operate when paper is inserted.

•Overheat:

The Red LED light indicates the shredder has shred continuously beyond the maximum running time

and overheating, the unit will automatically shut off. If this happens, switch the shredder Off for 30

minutes or longer before resuming normal operation.

•BinFull:

When the "Basket is Full", the RED light will indicate it needs to be emptied. While lit, the shredder

will be inoperable until the wastebasket is cleared.

•Overload:

The Red LED light indicates when too much paper is inserted. Use the "Reverse" mode to back up

and reduce number of sheets.

•DoorOpen:

The Red LED light indicates the shredder basket is not pushed in properly. Shredders with pull-out

wastebaskets feature a safety power cut off upon bin removal. Make sure the pull-out wastebasket is

properly set back into place and the green “Power On” indicator is lit.

LEDStatusIndicators:

Dooropen/Overload/Binfull/Overheat/PowerOn

9ENGLISH

OPERATION MAINTENANCE

Shredder

Oil

DONOTUSE

AEROSOLPRODUCTS!

!Caution:

FIGURE5

Warning:Failuretoproperlymaintainyourshredderwillvoidthewarranty.

Oil the shredder blades every month with basic vegetable, cooking oil or shredder oil. Follow oiling

procedure below (FIGURE 5). It helps to keep the shredder blades operating well over many years of

use.

Oilingprocedure:

1. Turn off shredder.

2. Apply shredder oil across paper entry.

3. Turn shredder in reverse mode for 3~5 seconds.

Note:ShredderoilisNOTincluded.

• Donotsprayorkeepanyaerosolproducts

inoraroundshredder.

• DONOTUSECANNEDAIRONSHREDDER.

CLEANING:

• ALWAYS UNPLUG THE SHREDDER BEFORE CLEANING!

• Only clean the shredder by carefully wiping the unit with a dry soft cloth or towel.

• Do not clean or immerse shredder in water. Having the unit wet may result in damage or malfunction to

the electrical components. If the shredder happens to get wet, be sure to completely dry the unit immedi-

ately with a cloth or towel.

• Never use anything flammable to clean the shredder. This may result in serious injury or damage to the product.

10 ENGLISH

TROUBLESHOOTING

If there is a problem with your shredder, check below for the symptoms and steps to resolve. If you

continue to have problems, contact customer support at our Service Center 1-800-327-8508. DO

NOT ATTEMPT TO REPAIR BY OPENING THE SHREDDER HEAD. This will completely void the

product warranty.

Theshredderdoesnotworkatall.

1)Make sure the unit is pluggedin and that the outlet is in good working order.

2) Overheatingwithextendeduse: In the event that the shredder has shred continuously

beyond the maximum running time and overheated, the unit will automatically shut off. If this hap-

pens, switchtheshredderOfffor30minutes or longer before resuming normal operation.

3) Shredders with pull-out wastebaskets feature a safety power cut off upon bin removal. Shredder will

not function unless the pull-out wastebasket is pushed in all the way and properly set back into place.

4) BesureNOTtoopenthecoverbeyondthepresetposition, otherwise the ShredSafe™

feature will be activated and the shredder will be inoperable. The “SHREDDER STATUS” indication line

must align with the “READY” setting.

5) If using a plastic bag to line the wastebasket, please remove it. This may cause the shredder not to

operate properly.

6) The activation sensor of the shredder is located near the center of the feed slot. Be sure to feed

directly into the center area to activate the machine (especially applies to smaller pieces of paper

or credit cards).

Theshredderrunsin“Rev(Reverse)”modebutnotin“Auto(On)”mode.

1) While in “Auto” mode, the motor will not start running until paper is inserted into the feed slot. Set

the unit to “Auto” and insert paper to shred. The sensor that activates the shredder in Auto mode

is located directly in the center of the slot. If the paper you are inserting is narrow, it may not be

activating the optical sensor. It is also possible that the feed slot has become blocked with paper.

Insert an index card or any rigid sheet of cardstock (old greeting card or folded file folder), directly

in the center of the feed slot, while applying force to help push the jammed paper through. This will

usually clear any paper blockage.

CONTINUED NEXT PAGE

Coverovertilt

Disabledposition

Readyposition

TROUBLESHOOTING

11ENGLISH

TROUBLESHOOTING

Howtoclearapaperjamintheshredder.

1) Switch the shredder over into Reverse (REV) mode. While in Reverse, the shredder will back up and

loosen the jammed paper. If required, you may need to tug and remove several sheets to effectively

clear the machine. When jammed paper is loosened or removed, switch back to the Auto-On mode

to continue shredding. Repeat steps if needed.

2) With stubborn situations where the reverse function does not help, you may loosen the jammed

paper with shredder oil (cooking oil is acceptable, nothing aerosol). Start by drizzling oil into the

feed slot where the paper is jammed. Let it soak for about 30 minutes to completely saturate. Return

the shredder back to Auto-On mode. Ifrequired,anindexcardorarigidsheetofcard-

stock(oldgreetingcardorfoldedfilefolder)canbefedintotheshreddertohelp

pushthejammedpaperthrough.

Theshredderisconstantlyrunningwhilein“Auto(On)”mode.

1) It is possible that the activation sensor, which starts the shredder, has become blocked with paper.

Insert an index card or any rigid sheet of cardstock (old greeting card or folded file folder), directly

in the center of the feed slot, while applying force to help push the jammed paper through. This will

usually clear any paper blocking the activation sensor and feed entry.

2) The activation sensor is being triggered by dust, debris, or oil. A cotton swab may be

used to clean the sensor. DO NOT USE CANNED AIR. The activation sensor of the shredder is

located around the center of the feed entry.

Powerswitchinautoposition

Usethickpaperstockorgreetingcard

topushthejamthrough

Inhaltsverzeichnis

Sprachen:

Andere Aurora Aktenvernichter Handbücher

Aurora

Aurora AU120MB Bedienungsanleitung

Aurora

Aurora AS800CD Bedienungsanleitung

Aurora

Aurora AS610C Bedienungsanleitung

Aurora

Aurora AS420C Bedienungsanleitung

Aurora

Aurora AU1410MA Bedienungsanleitung

Aurora

Aurora JamFree TouchGuard AU1630XA Bedienungsanleitung

Aurora

Aurora AU1630MA Bedienungsanleitung

Aurora

Aurora WM675XB Bedienungsanleitung

Aurora

Aurora AU1540MA Bedienungsanleitung

Aurora

Aurora AU1260XA Bedienungsanleitung

Aurora

Aurora AS618SB Bedienungsanleitung

Aurora

Aurora AU608MB Bedienungsanleitung

Aurora

Aurora AU1480MA Bedienungsanleitung

Aurora

Aurora AU1010MA Bedienungsanleitung

Aurora

Aurora AS424C Bedienungsanleitung

Aurora

Aurora AU2540XA Bedienungsanleitung

Aurora

Aurora ShredSafe AU1200XD Bedienungsanleitung

Aurora

Aurora WM845XE Bedienungsanleitung

Aurora

Aurora AS1023CD Bedienungsanleitung

Aurora

Aurora AU860MB Bedienungsanleitung

Aurora

Aurora AU875XA Bedienungsanleitung

Aurora

Aurora ShredSafe WM1270MA Bedienungsanleitung

Aurora

Aurora ShredSafe AU1050XA Bedienungsanleitung

Aurora

Aurora AS1500CD Bedienungsanleitung

Beliebte Aktenvernichter Handbücher anderer Marken

Swingline

Swingline STACK-AND-SHRED200X&200XL 60X Bedienungsanleitung

GBC

GBC ShredMaster CC055 Bedienungsanleitung

UNITED OFFICE

UNITED OFFICE UAV 190 A1 Bedienungsanleitung

Rexel

Rexel Optimum AutoFeed+ 45X Bedienungsanleitung

Martin Yale

Martin Yale 227284S1 Bedienungsanleitung

Bonsaii

Bonsaii DocShred C223-A Bedienungsanleitung

HSM

HSM Pure 740 max Bedienungsanleitung

TRU RED

TRU RED TR-BMC20A Bedienungsanleitung

Fellowes

Fellowes 50S Bedienungsanleitung

GBC

GBC SHREDMASTER 1236SE Bedienungsanleitung

Gude

Gude GH 2600 P Bedienungsanleitung

Ativa

Ativa DQ80M Bedienungsanleitung

Q-Connect

Q-Connect Q8CC Bedienungsanleitung

Fellowes

Fellowes POWERSHRED C-325CI Bedienungsanleitung

Olivetti

Olivetti Privacy 5000C Kurzanleitung

Dahle

Dahle paperSAFE 22022 Bedienungsanleitung

Formax

Formax OnSite FD 87 Bedienungsanleitung

GEHA

GEHA Home & Office S7 CD Bedienungsanleitung