Installation manual
IM.S2.GPRS-GATEWAY.EN-V1.0 9
With password:
AT+YZAPN=[APN],[user],[password]
Without password
AT+YZAPN=[APN]
Please note: leave the brackets [ ] away when entering the command.
In the following link you will find the exact information on [APN], [username] and [password] for all Dutch
providers.
https://www.gadgetgoeroe.nl/tips/apn-instellingen-van-alle-nederlandse-mobiel-internet-aanbieders/
This information may have changed. Check on the website of the provider the latest information.
This type of SIM-cards are offered and sold as M2M and IoT. They have a low monthly fee and a low maximum
bandwidth. Some providers have a portal to manage multiple cards.
Please contact your provider for installation outside the Netherlands.
4. Registration
4.1 Check connection in MyAutarco
In MyAutarco you can check if the GPRS Monitoring Gateway is connected and transmitting data. Go to the
monitoring setup wizard, enter the serial number and press ‘Check latest message’. If the GPRS Monitoring
Gateway is properly connected, you can continue to monitoring setup.
4.2 Monitoring setup
In order to register your GPRS Monitoring Gateway in MyAutarco, and to allocate it to a registered PV system,
send an e-mail to support@autarco.com, holding the following information:
•GPRS Monitoring Gateway:
oSerial ID
•Inverters
oSerial IDs
oCorresponding RS485 addresses (see chapter 2.2)
