Autel MaxiCheck MX900 Bedienungsanleitung

Trademarks

Autel®, MaxiSys®, MaxiDAS®, MaxiScan®, MaxiTPMS®, MaxiRecorder®, and

MaxiCheck®are trademarks of Autel Intelligent Technology Corp., Ltd.,

registered in China, the United States and other countries. All other marks

are trademarks or registered trademarks of their respective holders.

No part of this manual may be reproduced, stored in a retrieval system or

transmitted, in any form or by any means, electronic, mechanical,

photocopying, recording, or otherwise without the prior written permission of

Autel.

Disclaimer of Warranties and Limitation of Liabilities

All information, specifications and illustrations in this manual are based on

the latest information available at the time of printing.

Autel reserves the right to make changes at any time without notice. While

information of this manual has been carefully checked for accuracy, no

guarantee is given for the completeness and correctness of the contents,

including but not limited to the product specifications, functions, and

illustrations.

Autel will not be liable for any direct, special, incidental, indirect damages or

any economic consequential damages (including the loss of profits).

IMPORTANT

Before operating or maintaining this unit, please read this manual carefully,

paying extra attention to the safety warnings and precautions.

For Services and Support

pro.autel.com

www.autel.com

1-855-288-3587/1-855-AUTELUS (North America)

0086-755-86147779 (China)

[email protected]

For technical assistance in all other markets, please contactyour local selling

agent.

Safety Information

For your own safety and the safety of others, and to prevent damage to the

device and vehicles upon which it is used, it is important that the safety

instructions presented throughout this manual be read and understood by all

persons operating or coming into contact with the device.

There are various procedures, techniques, tools, and parts for servicing

vehicles, as well as in the skill of the person doing the work. Because of the

vast number of test applications and variations in the products that can be

tested with this equipment, we cannot possibly anticipate or provide advice

or safety messages to cover every circumstance. It is the automotive

technician’s responsibility to be knowledgeable of the system being tested. It

is crucial to use proper service methods and test procedures. It is essential

to perform tests in an appropriate and acceptable manner that does not

endanger your safety, the safety of others in the work area, the device being

used, or the vehicle being tested.

Before using the device, always refer to and follow the safety messages and

applicable test procedures provided by the manufacturer of the vehicle or

equipment being tested. Use the device only as described in this manual.

Read, understand, and follow all safety messages and instructions in this

manual.

Safety Messages

Safety messages are provided to help prevent personal injury and equipment

damage. All safety messages are introduced by a signal word indicating the

hazard level.

DANGER

Indicates an imminently hazardous situation which, if not avoided, will result

in death or serious injury to the operator or to bystanders.

WARNING

Indicates a potentially hazardous situation which, if not avoided, could result

in death or serious injury to the operator or to bystanders.

iii

Safety Instructions

The safety messages herein cover situations Autel is aware of. Autel cannot

know, evaluate or advise you as to all of the possible hazards. You must be

certain that any condition or service procedure encountered does not

jeopardize your personal safety.

DANGER

When an engine is operating, keep the service area WELL VENTILATED or

attach a building exhaust removal system to the engine exhaust system.

Engines produce carbon monoxide, an odorless, poisonous gas that causes

slower reaction time and can lead to serious personal injury or loss of life.

SAFETY WARNINGS

Always perform automotive testing in a safe environment.

Wear safety eye protection that meets ANSI standards.

Keep clothing, hair, hands, tools, test equipment, etc. away from all

moving or hot engine parts.

Operate the vehicle in a well ventilated work area, for exhaust gases are

poisonous.

Put the transmission in PARK (for automatic transmission) or NEUTRAL

(for manual transmission) and make sure the parking brake is engaged.

Put blocks in front of the drive wheels and never leave the vehicle

unattended while testing.

Be extra cautious when working around the ignition coil, distributor cap,

ignition wires and spark plugs. These components create hazardous

voltages when the engine is running.

Keep a fire extinguisher suitable for gasoline, chemical, and electrical

fires nearby.

Do not connect or disconnect any test equipment while the ignition is on

or the engine is running.

Keep the test equipment dry, clean, free from oil, water or grease. Use a

mild detergent on a clean cloth to clean the outside of the equipment as

necessary.

Do not drive the vehicle and operate the test equipment at thesame time.

Any distraction may cause an accident.

Refer to the service manual for the vehicle being serviced and adhere to

all diagnostic procedures and precautions. Failure to do so may result in

personal injury or damage to the test equipment.

To avoid damaging the test equipment or generating false data, make

sure the vehicle battery is fully charged and the connection to the vehicle

DLC is clean and secure.

Do not place the test equipment on the distributor of the vehicle. Strong

electro-magnetic interference can damage the equipment.

Using This Manual

This manual contains device usage instructions.

Some illustrations shown in this manual may contain modules and optional

equipment that are not included in your system. Contact your sales

representative for availability of other modules and optional tools or

accessories.

Conventions

The following conventions are used.

Bold Text

Bold text is used to highlight selectable items such as buttons and menu

options.

Example:

Tap OK.

Notes and Important Messages

Notes

A NOTE provides helpful information such as additional explanations, tips,

and comments.

Example:

NOTE

New batteries reach full capacity after approximately 3 to 5 charging and

discharging cycles.

Important

IMPORTANT indicates a situation which, if not avoided, may result in damage

to the test equipment or vehicle.

Example:

IMPORTANT

Keep the cable away from heat, oil, sharp edges and moving parts. Replace

damaged cables immediately.

Hyperlink

Hyperlinks, or links, that take you to other related articles, procedures, and

illustrations are available in electronic documents. Blue italic text indicates a

selectable hyperlink and blue underlined text indicates a website link or an

email address link.

Illustrations

Illustrations used in this manual are samples, the actual testing screen may

vary for each vehicle being tested. Observe the menu titles and on-screen

instructions to make correct option selection.

Technical Specifications

Table 2-1 Specifications

Item

Description

Recommended Use

Indoor

Operating System

AndroidTM 11

Processor

Cortex-A55 processor

Memory

64GB

Display

8-inch LCD capacitive touchscreen with

1280x800 resolution

Connectivity

Type C

USB 2.0

Wi-Fi

Micro SD card (supports up to 32GB)

Sensors

Ambient light sensor for brightness auto

changing

Audio Input/Output

Input: N/A

Output: buzzer

Power and Battery

3.8V/7700 mAh lithium-polymer battery

Charges via 5 VDC power supply

Tested Battery Life

Around 4.5 hours of continuous use

Battery Charging Input

5 V/3A

Power Consumption

500 mA (LCD on with default brightness, Wi-Fi

on) @3.8V

Operating Temp.

-10 to 60°C(14 to 140°F)

Storage Temp.

-20 to 70°C (-4 to 158°F)

Operating Humidity

5% - 95% non-condensing

。 

wwautel.com >Suppo> Downloads >Autel Update Tools

 。 。 。

Soware Update

O     







 

 「 

「 。m』

 

Wireless Data Printing



O 。  

「．

 

 「 「

 

「 









「 「 



For   

 I I 

I  I I

I 

。 

FCC& ISDE Statement

This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt

RSS standard(s).Operation is subject to the following two conditions:

(1)this device may not cause harmful interference, and (2)this device must accept any

interference received, including interference that may cause undesired operation.

Cet appareil est conforme àla partie 15 des règles de la FCC et aux normes RSS exemptées

de licence d’Industrie Canada. Le fonctionnement est soumis aux deux

conditions suivantes :(1)cet appareil ne doit pas causer d’interférences nuisibles, et (2)cet

appareil doit accepter toute interférence reçue, y compris les interferences pouvant entraîner

un fonctionnement indés

Changes or modifications to this unit not expressly approved by the party responsible

forcompliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonableprotection against harmful interference in a residential installation. This equipment

generates,uses and can radiate radio frequency energy and, if not installed and used in

accordance withthe instructions, may cause harmful interference to radio communications.

However, there is noguarantee that interference will not occur in a particular installation. If this

equipment doescause harmful interference to radio or television reception, which can be

determined by turningthe equipment off and on, the user is encouraged to try to correct the

interference by one ormore of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

-- Consult the dealer or an experienced radio/TV technician for help.

This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102

and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF

exposure and compliance.

cet appareil est conforme àl'exemption des limites d'évaluation courante dans la section 2.5

du cnr - 102 et conformitéavec rss 102 de l'exposition aux rf, les utilisateurs peuvent obtenir

des données canadiennes sur l'exposition aux champs rf et la conformité.

This equipment complies with Canada radiation exposure limits set forth for an uncontrolled

environment.

Cet équipement est conforme aux limites d'exposition aux rayonnements du Canada établies

pour un environnement non contrôlé.

The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential

for harmful interference to co-channel mobile satellite systems.

L'appareil destiné à fonctionner dans la bande 5150-5250 MHz est uniquement destiné à une

utilisation en intérieur afin de réduire le potentiel d'interférences nuisibles aux systèmes mobiles

par satellite cocanaux.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Autel Prüfgeräte Handbücher

Autel

Autel MaxiLink ML609P Bedienungsanleitung

Autel

Autel MaxiService EBS301 Bedienungsanleitung

Autel

Autel MaxiPRO MP808S Bedienungsanleitung

Autel

Autel EVO NEST Bedienungsanleitung

Autel

Autel MaxiLink ML529 Bedienungsanleitung

Autel

Autel MaxiPRO MP808TS Bedienungsanleitung

Autel

Autel AutoLink AL529 Bedienungsanleitung

Autel

Autel Autolink AL539B Bedienungsanleitung

Autel

Autel MaxiBAS B200 Bedienungsanleitung

Autel

Autel MaxiBas BT508 Bedienungsanleitung

Autel

Autel MaxiTPMS TS601 Bedienungsanleitung

Autel

Autel MaxiDAS DS808TS Bedienungsanleitung

Autel

Autel Autolink AL619 Bedienungsanleitung

Autel

Autel MaxiBAS BT609 Bedienungsanleitung

Autel

Autel AutoLink AL419 Bedienungsanleitung

Autel

Autel AutoLink AL529 Bedienungsanleitung

Autel

Autel MaxiBAS BT608 Bedienungsanleitung

Autel

Autel MaxiSys SCR Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung