The information contained in this document is the property of Automatic Systems and is confidential. The recipient is forbidd en to use it for any purpose other
than for the use of the products or the execution of the project to which they refer or to communicate it to third parties without the prior written consent of
Automatic Systems. Document subject to change without advance notification.
SL93x + PPV323 + TBV327-MT-EN p. 5/40
2. DESCRIPTION
2.1. Technical Specifications
Folded and welded AISI 304 stainless steel sheet housing.
Internal frame protected with epoxy coating.
Passage obstacle in clear toughened glass, thickness: 10 mm.
Electrical supply: single phase, 230 VAC, 50 Hz (not to be connected to a floating network or to high
impedance earthed industrial distribution network).
Consumption: 0.12 A in closed and locked position,
0.50 A when turning,
0.90 A while locking.
Automatic obstacle unlocking on power failure.
Variable speed controller ensures rapid obstacle movements at the start of movement and
deceleration at end of movement.
Obstacle position determined by position encoder.
Operating temperature: -20(*) to +50°C (*Thanks to the heat generated by the powered
internal equipment).
RH < 95%, without condensation.
Minimum opening time of the obstacles (adjustable): 2.5 seconds.
Net weight (kg):
MCBF (Mean Cycles Between Failures), when respecting recommended maintenance:
1,000,000 cycles
IP 43
EC compliant.
DAS Certified (Powered Security Device) in accordance with Fire Safety NF S 61-937
standard
Gates and turnstiles control pedestrian access in both directions.
By definition, Direction A is the direction in which the controls are located on the right of the
user (=> obstacle opening in the clockwise direction).
