The stop point of the print out is selected from this screen.
•The “Up” button increases the stop time.
•The “Down” button decreases the stop time.
•After reaching the correct stop time, press the “ENTER” button to
make your selection.
Windows on Data Facts Software Brief Details
FILE
DOWNLOAD FILE NAME
Select Download Data File
A) Select File Name
B) Select OK
This is an icon that turns into a window when selected.
Enter the name of the file.
The computer is now waiting for information to be sent
from the Data Logger.
1.
2.
Downloading a Run from the Data Logger to the Computer
Start with Data Facts Pro open and running on your computer.
A. Begin File Download at the Computer
See Data Facts Pro Software Instruction Section for further information on starting download.
5. COMPUTER DOWNLOAD
OP5
B. Send File from Data Logger
CHOOSE MODE
Disp Rec# Play
Press the “Play” button to access all download functions.
Press “Play”
Display Brief Details
1 2 3
Choose Function
Setup Cal Play
Press “Play”
1 2 3
This screen selects the start point for the print out. If no run is
recorded the Data Logger returns to the “CHOOSE MODE”.
•Selecting “Yes “ allows the Data Logger to find the point of launch.
Approximately 1 second is subtracted from this point. This enables
1-2 seconds of data to be printed prior to the launch point. While the
unit is calculating the exact launch point “Searching XXX” will be
displayed with an “ABORT” option. “ABORT” will return you to the
main menu.
•Selecting “No” advances to the next screen to allow you to enter the
starting point manually.
Find Launch ?
Yes No
“Yes”
Data Logger finds
point of launch
“No”
Advance to the next screen
and enter selection
1 2 3
Start at Sec. X
Up Down ENTER
The start point of the print out is selected from this screen. If you
chose “YES” on the previous screen, the calculated start point will be
displayed in place of the “X”.
•The “Up” button increases the start time.
•The “Down” button decreases the start time.
•After reaching the correct starting time, press the “ENTER” button
to make your selection. If no time is chosen, data will begin with
0 seconds.
“Up”
Increase time
“Down”
Decrease time
“ENTER”
Make selection
1 2 3
Stop at Sec. X
Up Down ENTER
“Up”
Increase time
“Down”
Decrease time
“ENTER”
Make selection
1 2 3
Press the “Play” button to enter the Play function.Press the “Play” button to enter the Play function.
If the data logger found the launch, add 3-4 seconds to your ET for the
appropriate stop time.
Start at 12.0 seconds
9.0 seconds (ET)
+4.0 seconds (cushion at beginning and end of run)
Stop at 25.0 seconds
To download the entire run enter Stop at NONE.
