8
8
2. If more than one input device is
connected, press G/SELECT or
remote buttons 1-4 to switch to the
next input.
nNotes:
If you try to switch to another HDMI
port where no input is connected, the
LED will flash continuously.
If a new input is selected, the current
input signal cuts off. The selector
automatically switches to the next input.
The selector also stops automatically if it
detects a new signal.
5Use Your Devices
1. Use the remote control to choose
the audio/video device and control
your programs using the controls on
your audio and video devices.
2. Press and hold G/SELECT for three
seconds or press Gon the remote
to power off the selector switch.
