Avanti 57637 Montageanleitung

!"#"$%&'(%)*+#"$*%,$-%.$$/-00)))1.,(+&(2(*"3.$14&5

65,"7%&'(%$*4.8"4,7%#'//&($%,$-%/(&9'4$#'//&($:.,(+&(2(*"3.$14&5

Owner’s Manual & Safety Instructions

Save This Manual Keep this manual for the safety warnings and precautions, assembly,

operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the

back of the manual near the assembly diagram (or month and year of purchase if product has no number).

Keep this manual and the receipt in a safe and dry place for future reference. 21a

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

Tools required for assembly an d se rv ic e may n ot b e in cl uded.

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

Page 2 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 57637

EF;6GH IJ6KFGLIM NFLMG6MFMO6LMEGFPPFGLIM

G,+7*%&2%O&8$*8$#

Safety ......................................................... 2

Set-up: Before Use ..................................... 6

Specifications ............................................. 6

Operation .................................................... 7

Maintenance .............................................. 10

Parts Lists and Diagrams .......................... 12

Warranty .................................................... 16

QFKMLMR%EHNSIPE%FMT%T6;LMLGLIME

This is the safety alert symbol. It is used to alert you to potential

personal injury hazards. Obey all safety messages that

follow this symbol to avoid possible injury or death.

Indicates a hazardous situation which, if not avoided,

will result in death or serious injury.

Indicates a hazardous situation which, if not avoided,

could result in death or serious injury.

Indicates a hazardous situation which, if not avoided,

could result in minor or moderate injury.

Addresses practices not related to personal injury.

Page 3;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1Item 57637

EF;6GHIJ6KFGLIMNFLMG6MFMO6 LMEGFPPFGLIM

LNJIKGFMG%EF;6GH%LM;IKNFGLIM

R*8*(,7%E,2*$U%Q,(8"83#

% QFKMLMR%K*,9%,77%#,2*$U%),(8"83#%,89%"8#$('4$"&8#1%%%

Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

E,V*%,77%),(8"83#%,89%"8#$('4$"&8#%2&(%2'$'(*%(*2*(*84*1

The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible

conditions and situations that may occur. It must be understood by the operator that common sense

and caution are factors which cannot be built into this product, but must be supplied by the operator.

1. Q&(W%,(*,%#,2*$U

a. X**/%)&(W%,(*,%47*,8%,89%)*77%7"$1

Cluttered or dark areas invite accidents.

b. T&%8&$%&/*(,$*%$.*%O&5/(*##&(%"8%*Y/7&#"V*%

,$5&#/.*(*#=%#'4.%,#%"8%$.*%/(*#*84*%

&2%27,55,+7*%7"<'"9#=%3,#*#%&(%9'#$1

Compressor motors produce sparks

which may ignite the dust or fumes.

c. G&%(*9'4*%$.*%("#W%&2%*7*4$("4%#.&4W%

&(%"8Z'(U=%'#*%"89&&(#%&87U.

d. X**/%4."79(*8%,89%+U#$,89*(#%,),U%

2(&5%,8%&/*(,$"83%4&5/(*##&(1

2. 67*4$("4,7%#,2*$U

a. O&5/(*##&(%/7'3#%5'#$%5,$4.%$.*%&'$7*$1%%

M*V*(%5&9"2U%$.*%/7'3%"8%,8U%),U1%%

T&%8&$%'#*%,8U%,9,/$*(%/7'3#%)"$.%3(&'89*9%

4&5/(*##&(#1 Standard plugs and matching

outlets will reduce risk of electric shock.

b. T&%8&$%*Y/&#*%4&5/(*##&(%$&%(,"8%&(%)*$%

4&89"$"&8#1 Water entering a compressor

will increase the risk of electric shock.

c. T&%8&$%,+'#*%$.*%4&(91%%M*V*(%'#*%$.*%

4&(9%2&(%'8/7'33"83%$.*%4&5/(*##&(1%%

X**/%4&(9%,),U%2(&5%.*,$=%&"7=%#.,(/%*93*#%

&(%5&V"83%/,($#1%%Damaged or entangled

cords increase the risk of electric shock.

3. J*(#&8,7%#,2*$U

a. E$,U%,7*($=%),$4.%).,$%U&'%,(*%9&"83%,89%

'#*%4&55&8%#*8#*%).*8%&/*(,$"83%$."#%

4&5/(*##&(1%%T&%8&$%'#*%$."#%4&5/(*##&(%

)."7*%U&'%,(*%$"(*9%&(%'89*(%$.*%"827'*84*%

&2%9('3#=%,74&.&7%&(%5*9"4,$"&81 A moment

of inattention while operating a compressor

may result in serious personal injury.

b. [#*%#,2*$U%*<'"/5*8$1

Wear protective paint spraying

gloves and a NIOSH-approved

respirator during use.

c. F7),U#%)*,(%*U*%/(&$*4$"&81

Wear ANSI-approved

safety goggles.

d. J(*V*8$%'8"8$*8$"&8,7%#$,($"831%%68#'(*%$.*%

#)"$4.%"#%"8%$.*%&22?/&#"$"&8%+*2&(*%4&88*4$"83%

$&%/&)*(%#&'(4*%&(%5&V"83%$.*%4&5/(*##&(1

4. O&5/(*##&(%'#*%,89%4,(*

a. G&%(*9'4*%$.*%("#W%&2%*7*4$("4%#.&4W=%9&%

8&$%*Y/&#*%$&%(,"81% Store indoors.

b. T&%8&$%'#*%$.*%4&5/(*##&(%"2%$.*%#)"$4.%

9&*#%8&$%$'(8%"$%&8%,89%&221 Any compressor

that cannot be controlled with the switch

is dangerous and must be repaired.

c. T"#4&88*4$%$.*%/7'3%2(&5%$.*%/&)*(%#&'(4*%

+*2&(*%5,W"83%,8U%,9Z'#$5*8$#=%4.,83"83%

,44*##&("*#=%&(%#$&("83%$.*%4&5/(*##&(1

Such preventive safety measures reduce the

risk of starting the compressor accidentally.

d. E$&(*%,8%"97*%4&5/(*##&(%&'$%&2%$.*%(*,4.%

&2%4."79(*8%,89%9&%8&$%,77&)%/*(#&8#%

'82,5"7",(%)"$.%$.*%4&5/(*##&(%&(%$.*#*%

"8#$('4$"&8#%$&%&/*(,$*%"$1 A compressor is

dangerous in the hands of untrained users.

e. N,"8$,"8%$.*%4&5/(*##&(1%%X**/%$.*%

4&5/(*##&(%47*,8%2&(%+*$$*(%,89%#,2*(%

/*(2&(5,84*1%%;&77&)%"8#$('4$"&8#%2&(%

7'+("4,$"83%,89%4.,83"83%,44*##&("*#1%%

X**/%9(U=%47*,8%,89%2(**%2(&5%&"7%,89%3(*,#*1%%

O.*4W%2&(%5"#,7"385*8$%&(%+"89"83%&2%5&V"83%

/,($#=%+(*,W,3*%&2%/,($#%,89%,8U%&$.*(%

4&89"$"&8%$.,$%5,U%,22*4$%$.*%4&5/(*##&(\#%

&/*(,$"&81%%L2%9,5,3*9=%.,V*%$.*%4&5/(*##&(%

(*/,"(*9%+*2&(*%'#*1 Many accidents are

caused by a poorly maintained compressor.

f. [#*%$.*%4&5/(*##&(%"8%,44&(9,84*%)"$.%

$.*#*%"8#$('4$"&8#=%$,W"83%"8$&%,44&'8$%

$.*%)&(W"83%4&89"$"&8#%,89%$.*%)&(W%$&%

+*%/*(2&(5*91 Use of the compressor for

operations different from those intended

could result in a hazardous situation.

5. E*(V"4*

a. ],V*%U&'(%4&5/(*##&(%#*(V"4*9%+U%,%

<',7"2"*9%(*/,"(%/*(#&8%'#"83%&87U%"9*8$"4,7%

(*/7,4*5*8$%/,($#1 This will ensure that the

safety of the compressor is maintained.

Page 4 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 57637

EF;6GH IJ6KFGLIM NFLMG6MFMO6LMEGFPPFGLIM

E/*4"2"4%E,2*$U%Q,(8"83#

1. K"#W%&2%2"(*%&(%*Y/7&#"&8%?%9&%8&$%#/(,U%

27,55,+7*%7"<'"9%"8%,%4&82"8*9%,(*,%&(%$&),(9#%,%

.&$%#'(2,4*1%%E/(,U%,(*,%5'#$%+*%)*77?V*8$"7,$*91%%

T&%8&$%#5&W*%)."7*%#/(,U"83%&(%#/(,U%).*(*%

#/,(W%&(%27,5*%"#%/(*#*8$1%%F(4"83%/,($#%?%W**/%

4&5/(*##&(%,$%7*,#$%^_%2**$%,),U%2(&5%*Y/7&#"V*%

V,/&(#=%#'4.%,#%).*8%#/(,U"83%)"$.%,%#/(,U%3'81

2. K"#W%&2%+'(#$"83%?%9&%8&$%,9Z'#$%(*3'7,$&(%."3.*(%

$.,8%5,(W*9%5,Y"5'5%/(*##'(*%&2%,$$,4.5*8$1

3. K"#W%&2%"8Z'(U%?%9&%8&$%9"(*4$%,"(%

#$(*,5%,$%/*&/7*%&(%,8"5,7#1

4. T&%8&$%'#*%$&%#'//7U%+(*,$."83%,"(1

5. Do not spray near open flames, pilot lights,

stoves, heaters, the air compressor, or any

other heat source. Most solvents and coatings

are highly flammable, particularly when

sprayed. Maintain a distance of at least 25 feet

from the air compressor. If possible, locate

the air compressor in a separate room.

6. Read all of the information concerning

coating products and cleaning solvents.

T&%8&$%'#*%4.7&("8,$*9%#&7V*8$#%

`*131%>?>?>%$("4.7&(&*$.U7*8*%,89%

9"4.7&(&5*$.,8*=%,7#&%W8&)8%,#%

5*$.U7*8*%4.7&("9*a%$&%47*,8%#/(,U%3'8#1%%

N,8U%#/(,U%3'8#%4&8$,"8%,7'5"8'5=%

)."4.%(*,4$#%#$(&837U%$&%4.7&("8,$*9%#&7V*8$#1%%

Contact the solvent or coating manufacturer as

needed regarding potential chemical reactions.

7. Spraying hazardous materials may result in serious

injury or death. Do not spray pesticide, acid,

corrosive material, fertilizer, or toxic chemicals.

8. Paints and solvents may be harmful or fatal if

swallowed or inhaled. Avoid prolonged skin

contact with solvents or paints as they will

irritate skin. After any contact, immediately

wash off exposed area with hot, soapy water.

9. Air hose fittings may get hot during use.

Allow fittings to cool before disconnecting.

10. T&%8&$%7*,V*%4&5/(*##&(%'8,$$*89*9%

2&(%,8%*Y$*89*9%/*("&9%)."7*%/7'33*9%"81%%

[8/7'3%4&5/(*##&(%,2$*(%)&(W"831

11. X**/%4&5/(*##&(%)*77?V*8$"7,$*91%%

T&%8&$%4&V*(%4&5/(*##&(%9'("83%'#*1

12. Drain Tank daily and after use. Internal rust causes

tank failure and explosion.

13. Do not remove the valve cover or

adjust internal components.

14. Compressor head gets hot during operation.

Do not touch it or allow children nearby

during or immediately following operation.

15. Do not use the air hose to move the compressor.

16. The use of accessories or attachments not

recommended by the manufacturer may

result in a risk of injury to persons.

17. All air line components, including hoses, pipe,

connectors, filters, etc., must be rated for a minimum

working pressure of 150 PSI, or 150% of the

maximum system pressure, whichever is greater.

18. USE OF AN EXTENSION CORD IS NOT

RECOMMENDED. If you choose to use an

extension cord, use the following guidelines:

GFSP6%F-%%K6OINN6MT6T%NLMLN[N%QLK6%

RF[R6%;IK%6bG6MELIM%OIKTE%

`>^_%!IPGa

MFN6JPFG6%

FNJ6K6E

`,$%2'77%7&,9a

6bG6MELIM%OIKT%

P6MRG]

   

0 – 6 18 16 16 14

6.1 – 10 18 16 T&%8&$%'#*1

10.1 – 12 16 16 T&%8&$%'#*1

12.1 – 16 14 12 T&%8&$%'#*1

a. Make sure your extension cord

is in good condition.

b. Be sure to use an extension cord which

is heavy enough to carry the current your

product will draw. An undersized cord will

cause a drop in line voltage resulting in loss

of power and overheating. Table A shows the

correct size to use depending on cord length

and nameplate ampere rating. If in doubt,

use the next heavier gauge. The smaller

the gauge number, the heavier the cord.

19. Maintain labels and nameplates on the

compressor. These carry important safety

information. If unreadable or missing, contact

Harbor Freight Tools for a replacement.

20. This product is not a toy.

Keep it out of reach of children.

21. People with pacemakers should consult their

physician(s) before use. Electromagnetic fields in

close proximity to heart pacemaker could cause

pacemaker interference or pacemaker failure.

%EF!6%G]6E6%LMEGK[OGLIME1

Page 5;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1Item 57637

EF;6GHIJ6KFGLIMNFLMG6MFMO6 LMEGFPPFGLIM

R(&'89"83

GI%JK6!6MG%6P6OGKLO%E]IOX%FMT%T6FG]%%

;KIN%LMOIKK6OG%RKI[MTLMR%QLK6%OIMM6OGLIM-%

O.*4W%)"$.%,%<',7"2"*9%*7*4$("4",8%"2%U&'%,(*%"8%9&'+$%,#%$&%).*$.*(%$.*%&'$7*$%"#%

/(&/*(7U%3(&'89*91%%T&%8&$%5&9"2U%$.*%/&)*(%4&(9%/7'3%/(&V"9*9%)"$.%$.*%4&5/(*##&(1%%

M*V*(%(*5&V*%$.*%3(&'89"83%/(&83%2(&5%$.*%/7'31%%T&%8&$%'#*%$.*%4&5/(*##&(%"2%$.*%/&)*(%4&(9%&(%/7'3%

"#%9,5,3*91%%L2%9,5,3*9=%.,V*%"$%(*/,"(*9%+U%,%#*(V"4*%2,4"7"$U%+*2&(*%'#*1%%L2%$.*%/7'3%)"77%8&$%2"$%$.*%&'$7*$=%

.,V*%,%/(&/*(%&'$7*$%"8#$,77*9%+U%,%<',7"2"*9%*7*4$("4",81

>>_?>^_%!FO%R(&'89*9%O&5/(*##&(#-%O&5/(*##&(#%)"$.%G.(**%J(&83%J7'3#

1. In the event of a malfunction or breakdown,

grounding provides a path of least resistance for

electric current to reduce the risk of electric shock.

This compressor is equipped with an electric

cord having an equipment-grounding conductor

and a grounding plug. The plug must be

plugged into a matching outlet that is properly

installed and grounded in accordance

with all local codes and ordinances.

2. Do not modify the plug provided –

if it will not fit the outlet, have the proper

outlet installed by a qualified electrician.

3. Improper connection of the equipment-grounding

conductor can result in a risk of electric shock.

The conductor with insulation having an outer

surface that is green with or without yellow

stripes is the equipment-grounding conductor.

If repair or replacement of the electric cord or

plug is necessary, do not connect the equipment-

grounding conductor to a live terminal.

4. Check with a qualified electrician or service

personnel if the grounding instructions are

not completely understood, or if in doubt as to

whether the compressor is properly grounded.

5. Use only 3-wire extension cords that have

3-prong grounding plugs and 3-pole receptacles

that accept the compressor’s plug.

6. Repair or replace damaged or

worn cord immediately.

R(&'89"83%

J"8

>^B%!FO%c?J(&83%J7'3%,89%I'$7*$

`2&(%'/%$&%>^B%!FO%,89%'/%$&%>B%Fa

7. This compressor is intended for use on a

circuit that has an outlet that looks like the one

illustrated above in >^B%!FO%c?J(&83%J7'3%

,89%I'$7*$. The compressor has a grounding

plug that looks like the plug illustrated above

in >^B%!FO%c?J(&83%J7'3%,89%I'$7*$.

8. The outlet must be properly installed and grounded

in accordance with all codes and ordinances.

9. Do not use an adapter to connect this

compressor to a different outlet.

EU5+&7&3U

JEL Pounds per square inch of pressure

O;N Cubic Feet per Minute flow

EO;N Cubic Feet per Minute flow

at standard conditions

MJG National pipe thread, tapered

MJE National pipe thread, straight

!Volts

dAlternating Current

FAmperes

Page 6 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 57637

EF;6GH IJ6KFGLIM NFLMG6MFMO6LMEGFPPFGLIM

E/*4"2"4,$"&8#

Electrical Rating 120VAC / 60Hz / 1A

Air Outlet Size 1/4" BSP

Air Pressure Shut-off 58 PSI

Restart 43.5 PSI

Nozzle/Needle Size 0.3mm

Sound Level 47 dBA @ 3'

LMTIIK%]I[E6]IPT%[E6%IMPH1

E*$?[/-%S*2&(*%[#*

%K*,9%$.*%6MGLK6%LNJIKGFMG%EF;6GH%LM;IKNFGLIM%#*4$"&8%,$%$.*%+*3"88"83%&2%$."#%

5,8',7%"847'9"83%,77%$*Y$%'89*(%#'+.*,9"83#%$.*(*"8%+*2&(*%#*$%'/%&(%'#*%&2%$."#%/(&9'4$1

GI%JK6!6MG%E6KLI[E%LMe[KH%;KIN%FOOLT6MGFP%IJ6KFGLIM-%

G'(8%$.*%J&)*(%E)"$4.%fI;;g%,89%'8/7'3%$.*%F"(%O&5/(*##&(%2(&5%"$#%*7*4$("4,7%

&'$7*$%+*2&(*%,##*5+7"83%&(%5,W"83%,8U%,9Z'#$5*8$#%$&%$.*%F"(%O&5/(*##&(1

M&$*- For additional information regarding the parts listed in the following pages,

refer to the Assembly Diagram near the end of this manual.

O&5/&8*8$#%,89%O&8$(&7#

J&)*(%

E)"$4.

F"(+('#.%

]&79*(

K*3'7,$&(0

;"7$*(

J(*##'(*%

R,'3*

F"(%

I'$7*$

T(,"8%

!,7V*

F"(%

]&#*

h'"4W?O&88*4$%

;"$$"83

M&ii7*%

O,/

M**97*%

O,/

G("33*(

J,"8$%

O'/ J(*?E*$%],897*%

)"$.%M**97*%

P"5"$"83%X8&+

h'"4W?O&88*4$%

O&'/7*(

Page 7;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1Item 57637

EF;6GHIJ6KFGLIMNFLMG6MFMO6 LMEGFPPFGLIM

I/*(,$"83%L8#$('4$"&8#

%K*,9%$.*%6MGLK6%LNJIKGFMG%EF;6GH%LM;IKNFGLIM%#*4$"&8%,$%$.*%+*3"88"83%&2%$."#%

5,8',7%"847'9"83%,77%$*Y$%'89*(%#'+.*,9"83#%$.*(*"8%+*2&(*%#*$%'/%&(%'#*%&2%$."#%/(&9'4$1

Q&(W%F(*,%E*$%[/

1. Designate a work area that is clean and well-lit.

The work area must not allow access by

children or pets to prevent injury.

2. Locate the Air Compressor on a flat level surface

to ensure proper pump lubrication and to prevent



around the unit to allow air circulation.

3. Route the power cord from the Air Compressor

to the grounded wall outlet, along a safe path

without creating a tripping hazard or exposing

the power cord to possible damage.

4. Before spraying, mask nearby objects not being

sprayed and lay cloths (not included) on the floors.

F"(%O&88*4$"&8%E*$'/

1. Using PTFE tape, connect included

Quick Connect fitting to included Air Hose.

2. Using PTFE tape, connect Air Hose to Air Outlet.

3. Connect Airbrush to its Quick-Connect

Fitting pre-installed on Air Hose.

4. The Air Hose must be able to reach work

area with enough extra length to allow

free movement while working.

R*8*(,7%O&5/(*##&(%I/*(,$"&8

1. Pull up on Regulator, then turn Regulator

counterclockwise completely to close.

Push down on Regulator.

2. Plug Power Cord into grounded 120VAC outlet.

3. Turn Power Switch ON.

4. Allow Air Compressor to build up

pressure until it cycles off.

5. Check for air leaks by applying soapy water to

connections while the Air Compressor is pumping

and after pressure cut-out. Look for air bubbles.

If air bubbles are present at connections, tighten

connections. Do not use the Air Compressor unless

all connections are air tight, the extra air leaking

out will cause the Air Compressor to operate too

often, increasing wear on the Air Compressor.

M&$*- As long as the Power Switch is set to ON, the

operation of the Air Compressor is automatic, controlled

by an internal pressure switch. The Air Compressor will

turn on automatically when the air pressure drops to

43.5 PSI, and will turn off automatically

when the air pressure reaches 58 PSI.

QFKMLMRj%GI%JK6!6MG%E6KLI[E%

LMe[KH%FMT%T6FG]%;KIN%

6bJPIELIM-

T&%8&$%,9Z'#$%$.*%"8$*(8,7%

/(*##'(*%#)"$4.1%%Any change to the

automatic pressure levels may cause excess pressure to

accumulate, causing a hazardous situation.

F'$&5,$"4%E.'$%I22%EU#$*5

1. If the Air Compressor automatically shuts off

before reaching its normal cutoff pressure:

a. Turn Power Switch to OFF position.

b. Unplug Air Compressor.

c. Wait until the Air Compressor

cools down (about 30 minutes).

d. Resume operation.

2. Possible causes of repeated automatic

shut off of the compressor are:

a. Using an extension cord that

is too long or narrow;

b. An air leak or open hose causing the compressor

to cycle too often and build up heat.

c. Turning Air Compressor off and

on again too quickly.

3. Correct any issues before further use to

avoid damage to the compressor.

Page 8 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 57637

EF;6GH IJ6KFGLIM NFLMG6MFMO6LMEGFPPFGLIM

R*8*(,7%F"(+('#.%I/*(,$"&8

GI%JK6!6MG%E6KLI[E%LMe[KH-%%T&%8&$%,9Z'#$%&(%$,5/*(%)"$.%,8U%4&8$(&7%&(%

4&5/&8*8$%"8%,%),U%8&$%#/*4"2"4,77U%*Y/7,"8*9%)"$."8%$."#%5,8',71%%

L5/(&/*(%,9Z'#$5*8$%4,8%(*#'7$%"8%$&&7%2,"7'(*%&(%&$.*(%#*("&'#%.,i,(9#1%





2(&5%#/(,U"83%,(*,%,#%/&##"+7*1

J,"8$%J(*/,(,$"&8%,89%;"77"83

M&$*- Proper paint mixture is essential. Follow paint

manufacturer’s directions for thinning.

1. Designate container for waste.

2. Thin paint according to manufacturer’s

directions and mix thoroughly.

3. If necessary, carefully strain paint through

a paint strainer or a piece of cheesecloth.

4. Remove Lid from Paint Cup. Using included

Pipette, add paint to Cup. Replace Lid.

5. Immediately clean Pipette with paint

manufacturer’s recommended solvent. Dispose

of paint and solvent in waste container.

J,"8$0F"(%;7&)%F9Z'#$5*8$

1. M**97*%P"5"$"83%X8&+-%%

a. Turn clockwise to reduce maximum

paint flow. This is helpful when

painting fine lines and detail work.

b. Turn counterclockwise to increase paint flow.

M**97*%

P"5"$"83%

X8&+

2. T"#$,84*- Move Airbrush closer to

workpiece for thinner lines, move Airbrush

away from workpiece for wider lines.

3. K*3'7,$&(- Increase pressure for more air

flow. Decrease pressure for less air flow.

J,"8$"83

M&$*- Practice painting techniques on scrap workpiece.

1. Plug Power Cord into grounded 120VAC outlet.

2. Turn Power Switch ON.

3. Press Trigger all the way down to start air flow,

then adjust Regulator between 25 - 30 PSI.

4. To avoid sputtering, press Trigger all

the way down to start air flow, then pull

Trigger back to start paint flow.

a. Pull Trigger all the way back

for maximum paint flow.

b. Pull Trigger part-way back for less paint flow.

>1%F"( ^1%J,"8$

5. To avoid sputtering, when stopping, push

Trigger forward to stop paint flow, then

release Trigger to stop air flow.

6. When changing colors or clearing clogs,

clean Airbrush according to Clean

During Use on page 9.

7. When finished, clean Airbrush according to

Clean After Every Use on page 9.

8. Turn Power Switch OFF and unplug Air Compressor.

9. Bleed air pressure from Airbrush then

disconnect Airbrush from Air Hose.

10. Place cloth under Regulator/Filter. Push Drain Valve

slowly to gradually release tank pressure and any

built-up moisture. Do not remove Drain Valve.

11. Store the Air Compressor and Airbrush

indoors out of children’s reach.

Page 9;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1Item 57637

EF;6GHIJ6KFGLIMNFLMG6MFMO6 LMEGFPPFGLIM

O7*,8"83

QFKMLMRj%%GI%JK6!6MG%E6KLI[E%LMe[KH-%GI%JK6!6MG%;LK6=%%

L;%F%;PFNNFSP6%EIP!6MG%M66TE%GI%S6%[E6T=%%

FT]6K6%GI%G]6%;IPPIQLMR-

a. ;&77&)%#&7V*8$%5,8'2,4$'(*(\#%47*,8%'/%

"8#$('4$"&8#%,89%#,2*$U%/(*4,'$"&8#1

b. ;7'#.%F"(+('#.%,%2'77%.&#*%7*83$.%

2(&5%,"(%4&5/(*##&(1

c. L2%4&77*4$"83%27'#.*9%#&7V*8$#%"8%

5*$,7%4&8$,"8*(=%$(,8#2*(%$&%8&85*$,7%

4&8$,"8*(=%,89%27'#.%5*$,7%4&8$,"8*(1

d. Q&(W%2,(%,),U%2(&5%,8U%"38"$"&8%

#&'(4*#%"8%,%V,/&(%2(**%,(*,1

e. X**/%47,##%FSO%2"(*%*Y$"83'"#.*(%8*,(+U1

E&7V*8$%E*7*4$"&8

;&77&)%/,"8$%,89%#&7V*8$%5,8'2,4$'(*(\#%(*4&55*89,$"&8#%2&(%47*,8"83=%#&7V*8$%$U/*=%,89%9"#/&#,71

O7*,8%T'("83%[#*

1. Designate container or use Airbrush Cleaning

Bottle (sold separately) for waste.

2. Have paper towels and brushes

(sold separately) on hand.

3. Pour excess paint back into paint container.

4. Add solvent to Cup, wipe with brush to loosen paint.

5. Spray solvent into container, then spray on

paper towel to see solvent runs clear.

6. Repeat adding solvent and spraying

until solvent runs clear.

7. Wipe Lid.

8. Resume painting.

O7*,8%F2$*(%6V*(U%[#*%

1. Designate small container for cleaning parts.

2. Clean according to Clean During

Use on page 9.

3. Turn Power Switch OFF and unplug Air Compressor.

4. Disconnect Airbrush from Air Hose.

5. Disassemble Airbrush:

a. Remove Handle.

b. Loosen Needle Chucking Nut enough for

Needle removal, but do not remove.

c. Carefully remove Needle, avoiding

bending tip. Wipe Needle with paper

towel wetted with solvent.

d. Remove Needle Cap and Nozzle Cap.

Place parts in small container.

e. Carefully remove Nozzle with included

wrench. Place in small container.

f. Add solvent to small container to cover

parts. Soak no longer than 10 minutes.

g. Use brush to clean parts and

inside front of Airbrush.

h. Wipe exterior surfaces with paper

towel wetted with solvent.

6. Make sure all parts are dry and free from

residual paint, then reassemble Airbrush:

a. Replace Nozzle with included wrench.

b. Replace Nozzle Cap and Needle Cap.

c. Inspect Needle to make sure tip is

not bent, then carefully insert Needle

straight into Needle Chucking Nut with

gentle pressure until Needle stops.

d. Tighten Needle Chucking Nut, then pull

Trigger to confirm Needle moves. If Needle

does not move, loosen Needle Chucking Nut

until Needle moves. Replace Handle.

M**97*%

O.'4W"83%

M'$

M&ii7*

O,/

M**97*

O,/

M&ii7*

M**97*

Q,#$*%T"#/&#,7

After cleaning, dispose of waste according to paint and solvent manufacturer’s

directions and local hazardous waste standards.

Page 10 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 57637

EF;6GH IJ6KFGLIM NFLMG6MFMO6LMEGFPPFGLIM

N,"8$*8,84*%,89%E*(V"4"83

%J(&4*9'(*#%8&$%#/*4"2"4,77U%*Y/7,"8*9%"8%$."#%5,8',7%5'#$%

+*%/*(2&(5*9%&87U%+U%,%<',7"2"*9%$*4.8"4",81

GI%JK6!6MG%E6KLI[E%LMe[KH%;KIN%FOOLT6MGFP%IJ6KFGLIM-%

G'(8%$.*%J&)*(%E)"$4.%fI;;g%,89%'8/7'3%$.*%F"(%O&5/(*##&(%2(&5%"$#%*7*4$("4,7%&'$7*$%

+*2&(*%/*(2&(5"83%,8U%"8#/*4$"&8=%5,"8$*8,84*=%&(%47*,8"83%/(&4*9'(*#1

GI%JK6!6MG%E6KLI[E%LMe[KH%;KIN%FLK%OINJK6EEIK%;FLP[K6-%

T&%8&$%'#*%9,5,3*9%*<'"/5*8$1%%L2%,+8&(5,7%8&"#*%&(%V"+(,$"&8%&44'(#=%

.,V*%$.*%/(&+7*5%4&((*4$*9%+*2&(*%2'($.*(%'#*1

O7*,8"83=%N,"8$*8,84*=%,89%P'+("4,$"&8

F"(%O&5/(*##&(

1. S6;IK6%6FO]%[E6= inspect the

general condition. Check for:

• loose hardware,

• misalignment or binding of moving parts,

• cracked or broken parts,

• damaged electrical wiring, and

• any other condition that may

affect its safe operation.

2. F;G6K%[E6= wipe external surfaces of the

Air Compressor with a clean cloth, then

store indoors out of children’s reach.

3. QFKMLMRj%%GI%JK6!6MG%E6KLI[E%

LMe[KH-%%L2%$.*%#'//7U%4&(9%&2%$."#%F"(%

O&5/(*##&(%"#%9,5,3*9=%"$%5'#$%+*%(*/7,4*9%

&87U%+U%,%<',7"2"*9%#*(V"4*%$*4.8"4",81

F"(+('#.

1. S6;IK6%6FO]%[E6= inspect the

general condition. Check for:

• bent needle,

• stuck needle,

• proper trigger movement, and

• any other condition that may

affect its safe operation.

2. F;G6K%[E6= clean according to Clean

After Every Use on page 9, then

store indoors out of children’s reach.

O&5/(*##&(%N,"8$*8,84*%E4.*9'7*

Following are general guidelines for maintenance checks of the Air Compressor.

M&$*- The environment in which the Air Compressor is used, and the frequency of use will affect how

often you will need to check the Air Compressor components and perform maintenance procedures.

T,"7U-

a. Make sure all nuts and bolts are tight.

b. Drain moisture from filter.

c. Check for abnormal noise or vibration.

d. Check for air leaks.*

e. Wipe off any oil or dirt from the Air Compressor.

* To check for air leaks, apply soapy water to joints while

the Air Compressor is pressurized. Look for air bubbles.

Andere Handbücher für 57637

Andere Avanti Luftkompressor Handbücher

Avanti

Avanti 57637 Bedienungsanleitung

Beliebte Luftkompressor Handbücher anderer Marken

Sparmax

Sparmax DC-25XR Bedienungsanleitung

KAESER

KAESER M122 Bedienungsanleitung

Briggs & Stratton

Briggs & Stratton Air Compressor Bedienungsanleitung

Fini

Fini F3GST2TK Bedienungsanleitung

Industrial Air

Industrial Air CP1580325 Programmierhandbuch

Campbell Hausfeld

Campbell Hausfeld RP3300 Kurzanleitung

Ingersoll-Rand

Ingersoll-Rand UP6 20 HP Bedienungsanleitung

Hitachi

Hitachi EC99S Bedienerhandbuch

Parkside

Parkside PKO 270 A1 Bedienungsanleitung

Clas Ohlson

Clas Ohlson QIE-ZTH-15 Bedienungsanleitung

Ferm

Ferm CRM1046 Bedienungsanleitung

BE AC153 Bedienungsanleitung

RIDGID

RIDGID OF25150A Bedienungsanleitung

Johnson Controls

Johnson Controls QUANTUM LX Handbuch

Sears

Sears Craftsman 919.167463 Bedienungsanleitung

Ring Automotive

Ring Automotive RAC700 Bedienungsanleitung

Craftsman

Craftsman 919.152144 Bedienungsanleitung

Alkin

Alkin W3 Series Bedienungsanleitung