Avantree BTHS-AS90 Bedienungsanleitung

User Manual

Stereo Wireless ANC Headphones

BTHS-AS90

Product Overview ·······················································································································································································1

Product specication ·················································································································································································1

Basic Operation····························································································································································································1

LED indicator·································································································································································································2

Activate noise cancellation (ANC) ·························································································································································2

Connect to a Bluetooth device·······························································································································································3

Reconnect to Bluetooth device······························································································································································3

One-touch connection (NFC)··································································································································································3

Using as a wired headphone···································································································································································4

Charging·········································································································································································································4

Clear the headphones pairing history·················································································································································5

Troubleshooting ··························································································································································································5

Product Overview

ANC

/ /

Product specication

• Bluetooth version: V4.1

• Support proles: HFP, HSP, A2DP, AVRCP

• Supported audio format(s): SBC, FastStream

• Driver diameter: 40mm

• Impedance: 32ohm

• Frequency response: 20Hz-20KHz

• Eective range: Line of sight approx. 30 ft (10 m)

• Working time: Up to 35 hours music time

• Charging time: approx. 2 hours

• Ear pads inner diameter: 6cm (length)* 3.7cm(width)

• Ear pads outer diameter: 9.5cm (length)* 7.5cm(width)

• Product weight: 230g

Please read this User Guide carefully and keep it handy

For more AS90 product information please see support.avantree.com or search “AS90”

or “Avantree Aria” on www.avantree.com

Basic Operation

General function

Power On Slide the power switch towards middle

Power O Slide the power switch towards

Activate/ deactivate smart voice assistant Press once (wireless connected, non-calling status)

Voice prompts o / on Press and hold both and for 1s to deactivate voice

prompts

Music Control >

Play / Pause music Press once

Volume up / down Press / once

Next / Previous track Hold / for 2s

Call Control >

Answer / End a call Press once

Reject a call Hold for 2s with a call coming-in

Last number redial Press twice

Mic mute on / o On the headset - Press once during an active call

On boom mic –Mute on / Mute o

LED indicator

Working Status LED indicator

ANC ON ANC indicator* shows GREEN

ANC OFF ANC indicator* turns OFF

Pairing Mode Blinks BLUE & RED alternately

Connected Blinks BLUE once every 5s

Reconnecting Blinks BLUE once every 1s

Disconnected Blinks BLUE once every 2s

Low battery Blinks RED once every 10s

Play audio in SBC Codec Blinks BLUE once every 5s

Activate noise cancellation (ANC)

After power ON, slide ANC switch to “ANC” to activate the ANC function. The ANC LED light will turn GREEN.

Slide ANC switch opposite to“ANC” to deactivate ANC function, the ANC LED will turn o.

Note:

• You will NOT be able to use the ANC function when the headphones’ battery is low.

• If you want to use the ANC function in wired mode, please power ON the headphones rst.

Connect to a Bluetooth device

• Enter headphones into PAIRNG MODE - Slide the power switch to position and hold for 3s until the LED

ashes BLUE and RED alternately.

• On your mobile device – Turn on Bluetooth and select “Avantree AS90” to connect. If you are using a Bluetooth

transmitter, please enter your transmitter into PAIRING MODE (please refer to your transmitter’s user manual).

Reconnect to Bluetooth device

Normally, once powered on, the headphones will reconnect to the last connected device automatically within

5-10 seconds.

If it doesn’t, please slide the Power Switch to position ONCE ,

OR select “Avantree AS90” from your device to connect manually. (If you’re using a Bluetooth transmitter, please

refer its user manual to reconnect)

One-touch connection (NFC)

NFC

• Turn on the NFC function on your Android smartphone (Android 4.1 or later) and ensure that the screen is

active and unlocked.

• Power on the headset, keep touching the smart phone with the headphones “N” Mark until the smart phone

reacts.

• Follow the on-screen instructions to complete the pairing and connection. When the headset has been

connected to the smart phone, you’ll hear voice prompt “connected.”

Using as a wired headphone

You may use the supplied 3.5mm audio cable to connect to a non-Bluetooth device.

Note: The control buttons, the built-in mic, and the detachable boom mic DOES NOT work in wired mode.

Note: If you wish to use the ANC function in wired mode, please turn on the headphones rst.

Charging

When the LED starts blinking RED once every 10s, or when you hear “beep” / prompts sound, you should

recharge your headphones. Please plug it into a USB wall charger (DC 5V / 0.5-2A) or a powered USB port via the

micro USB cable that we provided.

Normally it takes 2 hours to fully recharge. The LED indicator on the headphones will remain RED while charging

and automatically turn o when the charging is complete.

Clear the headphones pairing history

Turn on the headset (Non-calling Status.) Press and hold both and for 5 seconds until the LED blinks

PINK for 2 seconds. Now the pairing history has been cleared. The headphones will enter PAIRING MODE

automatically (LED blinks Blue and Red alternately) and you’ll be able to pair it with the target Bluetooth device

again.

Troubleshooting

No sound with PC?

• Set Avantree AS90 as the default device or output device on the PC.

• When using AS90 to make VOIP calls through apps, please set AS90 Hands-Free as Microphone and Speakers

device.

No sound with Bluetooth transmitter when watching TV?

• Ensure Bluetooth transmitter and headphones are connected properly.

• Check to ensure audio source is functioning properly

- AUX & RCA output on TV – test with wired headphones

- OPT output on TV – Set audio format to “PCM/LPCM” or turno Dolby/DTS

• Change your TV audio out setting to “External speakers /Headset.”

Headphones do not pair with Bluetooth device?

• Ensure that the AS90 is in Pairing mode – LED ashing BLUE and RED alternately.

• For Bluetooth transmitters, please ensure that the transmitter is in Pairing mode – you may refer to its user

manual.

• For Smart phones, tablets and PC

• Turn the Bluetooth o and then on again.

• Delete “Avantree AS90” headphones from your device’s Bluetooth list and try to pair again.

• Clear the headphone’s pairing history and pair again.

Andere Handbücher für BTHS-AS90

Inhaltsverzeichnis

Andere Avantree Kabellose Kopfhörer Handbücher

Avantree

Avantree Alto Solo BTHS-AH7 Bedienungsanleitung

Avantree

Avantree Aria Me AS90TA Bedienungsanleitung

Avantree

Avantree BTHS-063 Bedienungsanleitung

Avantree

Avantree BTSG-188 Bedienungsanleitung

Avantree

Avantree HT5009 Bedienungsanleitung

Avantree

Avantree TWS109 Gebrauchsanweisung

Avantree

Avantree BTHT-3189-BLK Bedienungsanleitung

Avantree

Avantree Aria Podio AS90T Bedienungsanleitung

Avantree

Avantree HT280 Bedienungsanleitung

Avantree

Avantree HT5009 Bedienungsanleitung

Avantree

Avantree HS063 Bedienungsanleitung

Avantree

Avantree BTHS-AS9P Bedienungsanleitung

Avantree

Avantree Medley Air Bedienungsanleitung

Avantree

Avantree BTHS-ANC032 Bedienungsanleitung

Avantree

Avantree HT8090 Bedienungsanleitung

Avantree

Avantree HT4186 Bedienungsanleitung

Avantree

Avantree Aria 90B Bedienungsanleitung

Avantree

Avantree HT5009 Bedienungsanleitung

Avantree

Avantree BTHT-4189-BLK Bedienungsanleitung

Avantree

Avantree Quartet Bedienungsanleitung

Avantree

Avantree Opera Bedienungsanleitung

Avantree

Avantree EON Bedienungsanleitung

Avantree

Avantree Aria 3 Bedienungsanleitung

Avantree

Avantree BTHS-NB16 Bedienungsanleitung

Beliebte Kabellose Kopfhörer Handbücher anderer Marken

Audity

Audity Infinite Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins PI4 Bedienungsanleitung

Niceboy

Niceboy Hive Sport 2 Bedienungsanleitung

Aiwa

Aiwa HST-250BT Bedienungsanleitung

Sennheiser

Sennheiser TR 185 Bedienungsanleitung

JBL

JBL DUET Arc Bedienungsanleitung

UNDER ARMOR

UNDER ARMOR UA STREAK Bedienungsanleitung

JLab Audio

JLab Audio FLEX Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beoplay 500 Bedienungsanleitung

Krüger & Matz

Krüger & Matz Play Bedienungsanleitung

Mixx

Mixx StreamQ C1 Bedienungsanleitung

Srhythm

Srhythm NiceComfort 75 Bedienungsanleitung

MOB

MOB MO6249 Bedienungsanleitung

Skullcandy

Skullcandy Uproar Bedienungsanleitung

JBL

JBL Everest 310 Bedienungsanleitung

Pioneer

Pioneer SE-E8TW Bedienungsanleitung

Harman

Harman JBL TUNE 500BT Bedienungsanleitung

JVC

JVC HA-Z77T Benutzerhandbuch