Avaya IG550 Bedienungsanleitung

Quick Start

for Hardware Installation:

IG550 Integrated Gateway

Preparing before you go on-site . . . . . . . . . . . . 3

Getting ready on-site . . . . . . . . . . . . . . . . . . 3

Upgrading J-series router software, if necessary . . . 4

Verifying the router has the power for the TIMs and PIMs 4

Installing hardware . . . . . . . . . . . . . . . . . . . 4

Loading Disk on Key, if available. . . . . . . . . . . . 9

Connecting the LAN and your laptop after

using Disk on Key . . . . . . . . . . . . . . . . . . . 11

Finish configuring the router after using Disk on Key 12

Installing an IG550 Integrated Gateway using the J-Web

Quick Configuration interface . . . . . . . . . . . . . 12

Configuring the router using the CLI, if you

did not use J-Web Quick Configuration . . . . . . . 13

Configuring the TGM550 . . . . . . . . . . . . . . . . 17

03-601553

Issue 2

January 2008

Issue 2 January 2008 3

Preparing before you go on-site

1. Check Juniper software compatibility with TGM550 Gateway Module

firmware. See http://support.avaya.com.

2. Download the most recent firmware for the TGM550. See http://

support.avaya.com.

3. Ensure the customer has an FTP or TFTP server that is accessible to the

TGM550. If not, download a TFTP server to your laptop.

4. Review safety requirements and airflow requirements. See Installing and

Configuring the IG550 Integrated Gateway.

5. Get the tools you need:

●Electrostatic discharge (ESD) grounding strap

●Flathead and Phillips head screwdrivers

Getting ready on-site

1. Verify you have:

●The Juniper Services Router (J2320, J2350, J4350 or J6350)

●A 10 AWG grounding cable

●An AC or 14 AWG DC power cable

●Cables for the TGM550, Telephony Interface Modules (TIMs), and

Physical Interface Modules (PIMs)

!CAUTION:

CAUTION: You cannot use a 14 AWG grounding cable with the router. The

grounding cable must be 10 AWG.

●A USB modem

●Two distinct and different console cables:

- An RJ-45 flat rollover cable and a DB-9 adapter for console

connections to the TGM550

- An ordinary round RJ-45 Ethernet cable and a DB-9 adapter for

console connections to the Juniper router

4 Quick Start for Hardware Installation: IG550 Integrated Gateway

Upgrading J-series router software, if necessary

Note:

Note: The software of the Juniper Services Router must match the

firmware version of the TGM550. See the Communication

Manager Software/Firmware Compatibility Matrix under

Downloads on support.avaya.com.

1. See the Juniper J2320, J2350, J4350, and J6350 Services Router Getting

Started Guide, Release 8.4.

Verifying the router has the power for the TIMs

and PIMs

Verify that the project manager, sales representative, or sales engineer has

ordered the appropriate quantity and types of TIM and PIM modules for the

router you are installing. If not, see "TIM and PIM limits based on heat and

power used by the IG550" in Overview of the Avaya IG550 Integrated

Gateway, 03-601548.

Installing hardware

1. If the customer has a four-post rack and is using a shelf, install the shelf

according to manufacturer guidelines. If the customer is using the

Issue 2 January 2008 5

brackets supplied with the router, install the brackets on the chassis of the

Juniper Services router midway between the front and back.

2. Install the router on the rack.

3. Be sure the power to the router is off.

Gateway

ALM

ACT

TGM550Console

ASB

ETR

RST

LineTrunk

1234

Analog

ALM

ACT

TIM514 Line5678

Line

1234

E1/T1

ALM

ACT

TIM510

TST

SIG

SO EI SM EM SI EO

BRI

ALM

ACT

TIM521 4

CONSOLE AUX USB

J4350

POWER

POWER RESET

CONFIG

STATUS

ALARM

10/100/1000

0/00/10/20/3

LINKTX/RX

LINKTX/RXLINKTX/RX

TX/RXLINK

Juniper

NETWORKS

qsmabrkt LAO 092906

Gateway

ALM

ACT

TGM550Console

ASB

ETR

RST

Line

Trunk

1234

Analog

ALM

ACT

TIM514Line

5678

Line

1234

E1/T1

ALM

ACT

TIM510

TST

SIG

SOEISMEMSIEO

BRI

ALM

ACT

TIM5214

CONSOLEAUXUSB

J4350

POWER

POWERRESET

CONFIG

STATUS

ALARM

10/100/1000

0/00/10/20/3

LINKTX/RX

LINKTX/RXLINKTX/RX

TX/RXLINK

Juniper

NETWORKS

qsmarack LAO 092906

6 Quick Start for Hardware Installation: IG550 Integrated Gateway

!CAUTION:

CAUTION: The Juniper Services Router must be turned off before inserting

or removing the Avaya TGM550, TIM modules, or PIM

modules. These modules are not hot-swappable. If you attempt

to remove or insert these modules while the router is turned on,

the router might reset or malfunction in some other way.

4. Insert the TGM550 and each TIM, PIM, ePIM, or uPIM into the correct

slot. If the slots are already administered on the Communication Manager

server, the slots you use must match the Communication Manager

administration. The TGM550, TIMS, and uPIMs can be inserted into any

slots. Other PIMs and ePIMs might have limitations. See "Inserting the

TGM550, the TIMs, and the PIMs in the router, if necessary" in Installing

and Configuring the Avaya IG550 Integrated Gateway, 03-601554.

5. Align the notches in the connector at the rear of the TGM550, TIM, or PIM

with the notches in the slot in the router. Then slide the module in until it

lodges firmly in the router.

!CAUTION:

CAUTION: Carefully slide the module straight into the slot to avoid

damaging the connector components.

6. Cable the TIMs and PIMs.

●TGM550 — CAT5 harness cables with RJ11 connectors

●TIM508 — A B25A unshielded 25-pair amphenol cable

h LAO 1003063macrdr

Analog

ALM

ACT

TIM514 Line5678

Line1234

E1/T1

ALM

ACT

TIM510

TST

SIG

SO EI SM EM SI EO

BRI

ALM

ACT

TIM521 4

CONSOLE AUX USB

J4350

POWER

POWER RESET

CONFIG

STATUS

ALARM

10/100/1000

0/0 0/1 0/2 0/3

LINK TX/RXLINK TX/RX LINK TX/RX

TX/RX LINK

Juniper

NETWORKS

Gateway

ALM

ACT

TGM550 Console

ASB

ETR

RST

LineTrunk

1234

Line

Issue 2 January 2008 7

●TIM510 T1/E1 — H600-383 Group 2 T1 cable with an RJ48C

connector

●TIM514 — CAT5 cable with an RJ11 connector

●TIM516 — A B25A unshielded 25-pair amphenol cable

●TIM518 — A B25A unshielded 25-pair amphenol cable

●TIM521 — CAT5 cable with an RJ45 connector

●Juniper PIMs, EPIMs, and UPIMs — see Juniper J2320, J2350, J4350,

and J6350 Services Router Getting Started Guide, Release 8.4

7. For the TIM508, TIM516, or TIM518, use the screw at the end of the

Amphenol connector to attach the connector to the left side of the TIM’s

Amphenol receptacle. Use a tie wrap to attach the cable to the tie wrap

loop to the right of the Amphenol receptacle on the TIM.

8. Connect the grounding cable to earth ground and the chassis grounding

point. Specifications include:

●10 AWG

●Minimum 8 Amps amperage

●Ring-type, vinyl-insulated TV14-6R lug or equivalent to accommodate

the 10 AWG cable

J4350 or J6350 ground - J2320 or J2350 ground -

qsmagnd3 LAO 092906

8 Quick Start for Hardware Installation: IG550 Integrated Gateway

9. Connect power to the back of the router.

●AC Power

a. Insert the appliance coupler end of a power cord into the appliance

inlet on the power supply faceplate.

b. For a 6350 only, repeat for the second power supply.

c. Insert the plug of each cord into an AC power source receptacle.

●DC Power

a. Ensure that the voltage across the DC power source cable leads is

0 V and that there is no chance that the cable leads might become

active during installation.

b. Verify that a licensed electrician has attached the appropriate power

cable lugs to the ends of the negative and positive DC source power

cables. These are the lugs that you are attaching to the chassis DC

terminals.

qsmagnd2 LAO 092906

J4350 J6350

Issue 2 January 2008 9

Loading Disk on Key, if available

Note:

Note: This Disk on Key procedure assumes that the router currently

has the factory default settings without a configuration file. If

there is a configuration file, this procedure cannot work.

However, if you want to use a USB disk on key and the router

already has been configured, you can press on the recessed

configuration button for over 5 seconds to delete the

configuration file or login to the router console port and issue

commands to set the router to the factory default settings.

1. If available, insert the Disk on Key (USB memory stick) into the USB port

on the front of the router. The Disk on Key contains the configuration

information. If a Disk on Key is not provided, go to Configuring the router

using the CLI, if you did not use J-Web Quick Configuration on page 13.

2. Press the power button (see 1in the appropriate illustration that follows) to

turn on the Juniper Services Router.

qsmausbk LAO 092926

Gateway

ALM

ACT

TGM550Console

ASB

ETR

RST

Line

Tru nk

1234

Analog

ALM

ACT

TIM514Line

5678

Line

1234

E1/T1

ALM

ACT

TIM510

TST

SIG

SOEISMEMSIEO

BRI

ALM

ACT

TIM5214

CONSOLEAUXUSB

J4350

POWER

POWERRESET

CONFIG

STATUS

ALARM

10/100/1000

0/00/1 0/20/3

LINKTX/RX

LINKTX/RXLINKTX/RX

TX/RXLINK

10 Quick Start for Hardware Installation: IG550 Integrated Gateway

J4350/J6350

J2320

J2350

3. When the Power on LED lights steady green, remove the Disk on Key.

The configuration file has been downloaded, loaded, and committed. The

root password is also set as part of the configuration.

Andere Handbücher für IG550

Inhaltsverzeichnis

Andere Avaya Tor Handbücher

Avaya

Avaya G700 Kurzanleitung

Avaya

Avaya G430 Kurzanleitung

Avaya

Avaya W310 Betriebsanleitung

Avaya

Avaya MCC1 Bedienungsanleitung

Avaya

Avaya G250 Series Bedienungsanleitung

Avaya

Avaya G450 Manager Bedienungsanleitung

Avaya

Avaya G450 Manager Bedienungsanleitung

Avaya

Avaya G450 Manager Bedienungsanleitung

Avaya

Avaya G450 Manager Merkblatt

Avaya

Avaya Media Gateway G350 Bedienungsanleitung

Avaya

Avaya G700 Kurzanleitung

Avaya

Avaya Advanced Gateway 2330 Betriebsanleitung

Avaya

Avaya ClearOne Converge Pro VH20 Beilage

Avaya

Avaya RAD IPmux-14 TDMoIP Beilage

Avaya

Avaya Media Gateway G350 Bedienungsanleitung

Avaya

Avaya IG550 Bedienungsanleitung

Avaya

Avaya Media Gateway G350 Bedienungsanleitung

Avaya

Avaya G450 Manager Bedienungsanleitung

Avaya

Avaya G450 Manager Bedienungsanleitung

Avaya

Avaya S8300 Series Handbuch

Avaya

Avaya G650 Bedienungsanleitung

Avaya

Avaya G450 Manager Bedienungs- und Wartungshandbuch

Avaya

Avaya G450 Manager Merkblatt

Avaya

Avaya G430 Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung