AVer AVerVision VP-1HD Installationsanleitung

Andere Handbücher für AVerVision VP-1HD

1

Inhaltsverzeichnis

Andere AVer Dokumentenkamera Handbücher

AVer

AVer AVerVision U15 Bedienungsanleitung

AVer

AVer Vision F50+ Bedienungsanleitung

AVer

AVer M15-13M Bedienungsanleitung

AVer

AVer M90UHD Bedienungsanleitung

AVer

AVer M11-8MV Bedienungsanleitung

AVer

AVer TabCam Bedienungsanleitung

AVer

AVer M11-8M Bedienungsanleitung

AVer

AVer AVerVision F50+ Bedienungsanleitung

AVer

AVer AVerVision M70 Bedienungsanleitung

AVer

AVer AVerVision F70W Bedienungsanleitung

AVer

AVer AVerVision M50 Bedienungsanleitung

AVer

AVer M70Wv2 Bedienungsanleitung

AVer

AVer AVerVision300AFHD Bedienungsanleitung

AVer

AVer AVerVision SPB350+ Bedienungsanleitung

AVer

AVer AVerVision F17-8M Bedienungsanleitung

AVer

AVer M15-13M Bedienungsanleitung

AVer

AVer M5 Bedienungsanleitung

AVer

AVer Vision F50 Bedienungsanleitung

AVer

AVer U70 Kurzanleitung

AVer

AVer W30 Bedienungsanleitung

AVer

AVer AVerVision F50 Bedienungsanleitung

AVer

AVer M15W Bedienungsanleitung

AVer

AVer M90UHD Bedienungsanleitung

AVer

AVer M70W Bedienungsanleitung

Beliebte Dokumentenkamera Handbücher anderer Marken

Lumens

Lumens PS760 Bedienungsanleitung

Genee World

Genee World GV8100 Bedienungsanleitung

Touchboards

Touchboards Vidifox DV 480 Bedienungsanleitung

Dukane

Dukane 210 Bedienungsanleitung

TTS

TTS Easi-View Pro Bedienungsanleitung

Lumens

Lumens dc153 Bedienungsanleitung

Avermedia

Avermedia AVerVision SPB350 Bedienungsanleitung

Inswan

Inswan INS-3 Bedienungsanleitung

Genee

Genee Vision 6100 Bedienungsanleitung

Rolls

Rolls DB14 - 02/10 Bedienungsanleitung

Lumens

Lumens DC-W80 Bedienungsanleitung

Dukane

Dukane FASTFAX AV-P750U Bedienungsanleitung

Optoma

Optoma DC554 Bedienungsanleitung

Ipevo

Ipevo Ziggi Bedienungsanleitung

Vidifox

Vidifox PV 380 Bedienungsanleitung

Recordex

Recordex SimplicityCam SC5i+ Technisches Handbuch

Ken A Vision

Ken A Vision TeachCam 910-171-150 Bedienungsanleitung

Avermedia

Avermedia AVerVision SPC300 Bedienungsanleitung

VP-1HD FAQ

There is no picture on the presentation screen.

1. Check all connections again as shown in the user manual.

2. Verify the setting of the display output device; make sure it is set to the right

input/channel.

3. If you have a laptop connected to the document camera and cannot see the

desktop on the presentation screen, please make sure to set your laptop to dual

screen display mode.

4. Check the TV/RGB switch on the side of the camera and set it accordingly to your

display device type.

I have set up the VP-1HD and checked all the connections as specified in

the user manual but I cannot get a picture on the preferred presentation

screen.

1. The unit’s power button turns Red in standby mode. Press the POWER button

again to turn and the LED light will turn Green.

2. The default camera display resolution setting is on 1024X768. If your output

device does not support this resolution; Adjust the resolution dip switch on the

side of the document camera accordingly.

3. If your output device is a TV or any analog device, please switch the TV/RGB dip

switch to TV.

The picture on the presentation screen is out of focus.

1. Check your output device’s focus adjustment.

2. Press the auto focus button on your document camera’s control panel.

3. Power-cycle your camera.

There is no computer signal on the presentation screen.

1. Check all cable connections among the display device, VP-1HD and your PC,

replace cables if necessary.

2. Connect your PC to the VP-1HD first before you power on your computer.

3. Make sure to switch your Laptop to dual screen display mode by holding Fn and

repeatedly toggling the F5 key. For different command, please refer to your

laptop manual.

Can you use the AVervision software with the VP-1HD ?

1. Yes. The VP-1HD have a USB port therefore you can connect this camera to your

computer to use the Software.

Is there a light source on the VP-1HD ?

1. No. The VP-1HD does not have a built in lamp, it uses ambient light in your

environment.

The brightness on the presentation screen is dark and unreadable

1. Press the Brightness level control buttons on the control panel to adjust the

brightness.

2. Make sure there is sufficient lighting in the room.

3. Your projector’s bulb may need to be changed.