Avermedia AVerDiGi Bedienungsanleitung

AVerMedia®

AVerDiGi

System Controller Pro

User Manual

Oct. 2009

DISCLAIMER

No warranty or representation, either expressed or implied, is made with respect to the

contents of this documentation, its quality, performance, merchantability, or fitness for a

particular purpose. Information presented in this documentation has been carefully

checked for reliability; however, no responsibility is assumed for inaccuracies. The

information contained in this documentation is subject to change without notice.

In no event will AVerMedia be liable for direct, indirect, special, incidental, or

consequential damages arising out of the use or inability to use this product or

documentation, even if advised of the possibility of such damages.

TRADEMARKS

AVerMedia, being authorized AVerMedia INFORMATION, Inc. to use, is registered

trademarks of AVerMedia TECHNOLOGIES, Inc. IBM PC is a registered trademark of

International Business Machines Corporation. Macintosh is a registered trademark of

Apple Computer, Inc. Microsoft is a registered trademark and Windows is a trademark of

Microsoft Corporation. All other products or corporate names mentioned in this

documentation are for identification and explanation purposes only, and may be

trademarks or registered trademarks of their respective owners.

may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated

into any language in any form by any means without the written permission of AVerMedia®

TECHNOLOGIES, Inc.

TABLE OF CONTENTS

CHAPTER 1 INTRODUCTION............................................................................1

1.1 Hardware Introduction............................................................................................................... 1

1.1.1 Left Side.......................................................................................................................... 1

1.1.2 Rear Side ........................................................................................................................ 1

1.1.3 Familiarizing with System Controller Panel Buttons........................................................ 2

1.2 Hardware Installation................................................................................................................. 5

1.2.1 Connecting with the DVR Server ................................................................................... 5

1.2.2 Connect a PTZ Camera to System Controller Pro......................................................... 5

CHAPTER 2 OPERATING THE SYSTEM CONTROLLER PRO........................6

2.1 Using the System Controller for the First Time.......................................................................... 6

2.1.1 Switching to USB DVR Mode......................................................................................... 7

2.2 Familiarizing with LCD Screen................................................................................................. 8

2.3 Operating the LCD Menu......................................................................................................... 9

2.4 Select a Camera .....................................................................................................................11

2.5 Locking System Operation..................................................................................................... 12

2.6 Trigger the Alarm Button ........................................................................................................ 13

2.7 To Playback the Recorded File .............................................................................................. 14

2.8 To View the Emap .................................................................................................................. 16

2.9 PTZ Operation......................................................................................................................... 17

2.9.1 Using the Joystick to Operate the PTZ Camera............................................................ 17

2.9.2 To Focus the Object ...................................................................................................... 18

2.9.4 Setup preset position and Use Preset........................................................................... 19

Setup Preset Position.................................................................................................... 19

Using the Preset Button ................................................................................................ 19

2.9.5 Enabling the AutoPan.................................................................................................... 20

2.9.6 Using Digital Zoom........................................................................................................ 22

2.10 Multi-Functions Menu........................................................................................................... 23

2.10.1 Select a Monitor Layout................................................................................................. 23

2.10.2 Camera Setup............................................................................................................... 24

Enable a Camera ......................................................................................................... 24

Enable a Camera View.................................................................................................. 25

Adjusting the Hue.......................................................................................................... 26

Adjusting the Saturation................................................................................................ 27

Adjusting the Brightness................................................................................................ 28

Adjusting the Contrast................................................................................................... 29

Enable the De-interlace................................................................................................. 30

Trigger the Relay of IP Camera..................................................................................... 31

2.10.3 Server Setup ................................................................................................................. 32

Start Recording.............................................................................................................. 32

Stop Recording.............................................................................................................. 33

Network Time Synchronization...................................................................................... 34

Open Event Log Viewer ................................................................................................ 34

2.10.4 Sound Setup.................................................................................................................. 35

2.10.5 Controller Setup ............................................................................................................ 36

Set a Password for System Controller .......................................................................... 36

Change the Password of the System Controller ........................................................... 38

Set the Timer................................................................................................................. 40

Adjusting the Brightness of LCD Screen....................................................................... 41

Adjusting the Contrast of LCD Screen .......................................................................... 42

Enable/disable Code Number Display .......................................................................... 43

Enable/disable Button Confirmation.............................................................................. 44

Viewing System Version Information............................................................................. 45

CHAPTER 3 OPERATING IN PTZ 485 MODE .................................................46

3.1 Switching to the PTZ 485 Mode............................................................................................. 46

3.2 Select the Protocol of the PTZ Camera ................................................................................. 48

3.3 Setup the Baudrate of the PTZ Camera ................................................................................ 49

3.4 Controller Setup..................................................................................................................... 50

Set a Password for System Controller .......................................................................... 50

Change the Password of the System Controller ........................................................... 52

Set the Timer................................................................................................................. 54

Adjusting the Brightness of LCD Screen....................................................................... 55

Adjusting the Contrast of LCD Screen .......................................................................... 56

Viewing System Version Information............................................................................. 57

Chapter 1 Introduction

The AVerDiGi System Controller Pro provides user an easy way to operate DVR server (NV/SA series).

1.1 Hardware Introduction

1.1.1 Left Side

Function Description

(1) USB Port 2 * USB ports for connection of keyboard, mouse, or USB flash memory.

(2) Audio Input For audio input device connection such as microphone.

(3) Audio Output For audio output device connection such as speaker.

- The audio input and output device has its own power supply is necessary.

- The audio input and output port act as the audio input and output port on the DVR

system.

1.1.2 Rear Side

Function Description

(1) RS485 Port For connection of Pelco-D/P PTZ camera

(2) Power Supply

Port For AC power adaptor connection.

1.1.3 Familiarizing with System Controller Panel Buttons

System Controller Panel figure

Function Description

(1) (Lock) To lock panel buttons and all operations are lock. Press it to lock and press

again to un-lock. If the system password has been set, please enter the

password to un-lock (see also Chapter 2.5)

(2) (Power) Lights up when unit is power on.

(3)

(Panic Button)

To trigger the alarm buttons that user has defined (see also Chapter 2.6).

To setup alarm button, please refer to Chapter 5.9 step 5 of NV User’s

Manual. If the alarm button hasn’t been defined, there is no any action

when alarm button is selected to trigger.

(4) Playback Control

Buttons (Jog/Shuttl

Enable/disable the jog/shuttle function. When button

lights up is enabling.

(Pause) To pause the playback.

(Play) To switch to playback mode and start playback.

(Jog/Shuttle)

- Jog dial (top part): Playback video at faster forward

or rewind speed that control by user.

- Shuttle ring (lower part): Playback video frame-by-

frame that control by user.

(5)

(Alarm Log)

To call out the alarm log window. To close alarm log window, press the

button again.

(6) LCD Screen To operate the each function in multi-functions menu and view system

related information.

(7) Multi-function

Buttons Each button represents a function that is corresponding to the function

display on the LCD screen. Press the button and operate it (see also

Chapter 2.10).

Function Description

(8) Enable/disable the PTZ camera move automatically that is based on the

selected camera group preset position number(see also Chapter 2.9.5).

(9) Custom

Function Buttons To view system information.

Enable/disable recording. Press it to start recording and press

again to stop recording. The authentication password is

required for stop recording. Using numeric key pad to enter the

password and press Enter button to confirm.

Enable/disable network connection. Press it to connect the

network and press again to disconnect the network. The

authentication password is required for stop network

connection. Using numeric key pad to enter the password and

press Enter button to confirm.

To enter system setup mode. The authentication password is

required to enter system setup mode. Using numeric key pad

to enter the password and press Enter button to confirm.

To freeze/un-freeze the surveillance screen. Press it to freeze

the screen and press again to un-freeze.

To extend/fold camera tree window.

Open/close PTZ control panel. Press it to call out the PTZ

control panel and press again to close it.

Call out Logout dialog.

(10) Preset/Set

Button Move the PTZ camera to the selected preset position (see also

Chapter 2.9.4).

To setup the PTZ preset position (see also Chapter 2.9.4))

(11) Enable/disable joystick as a mouse function.

(12) When lights up in green, user can use PTZ related operation(see also

Chapter 2.9).

(13) Joystick To control PTZ camera to left, right, up, down, zoom in, and zoom out.

(14) IRIS/Focus

Button

(IRIS)

To adjust the brightness of the image.

(Focus)

To adjust the focus of the PTZ camera.

Function Description

(15) Enable/disable digital zoom (see also Chapter 2.9.6).

(16) Numeric Key

Pad ~

For numbers entering

Enter button For confirmation

To exit from current status.

Moving the cursor to left or right.

(17) Back /Top Menu

Button Go back to previous multi-function menu screen.

Go back to the main menu screen.

(18)

(Camera Select)

Using to select the camera channel (see also Chapter 2.4)

(19) Microphone Build-in microphone

(20) Switch to full screen mode.

(21) Enable/disable channel display cycle automatically. Press it to start auto

pan and press again to stop.

(22) When button is pressed and lights up, the System controller can receive

the sound.

(23) Switch to Emap mode. In Emap mode, user can select different emap to

view(see also Chapter 2.8)

(24) Take a quick photo shot of the surveillance screen and save it.

(25) Switch to preview/live view mode.

1.2 Hardware Installation

1.2.1 Connecting with the DVR Server

The following is an example of System controller installation.

1. The DVR server should be power on and DVR program is executed.

2. Plug the power cord of the System Controller into power outlet.

3. And then, plug the USB cable that is attached on the System Controller to the USB port of the

DVR server.

1.2.2 Connect a PTZ Camera to System Controller Pro

The following is an example of PTZ camera install to System Controller Pro.

1. Connect the PTZ camera to System Controller Pro through the RS-485 interface.

2. Plug the power cord of the System Controller Pro into power outlet.

Chapter 2 Operating the System Controller Pro

2.1 Using the System Controller for the First Time

For the first time using the System Controller, please select the model of System Controller in DVR

server.

Follow the below steps to select the model:

1. Start up the DVR program.

2. Click Setup.

3. Select System, the System Setting windows will appear.

4. Click

Setup.

5. Select the Model as System Controller Pro. When DVR server has detected the System

Controller device, user should see the model name System Controller Pro in drop-down list.

6. Click OK to complete the setting.

7. If the setting is complete, the LCD of System Controller should display like following figure.

Andere Handbücher für AVerDiGi

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Avermedia Controller Handbücher

Avermedia

Avermedia AVerDiGi Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch