Avery Weigh-Tronix ZP900 Gebrauchsanweisung

ZP900/BSQ Connections

Connections on the ZP900

The connections for the ZP900 indicator are shown below.

Scale connector: The supplied RJ45 cable for connecting between the indicator and base is keyed so that it

will only fit into the ZP900 Quartzell Scale and BSQ Scale connectors. Do not connect between the BSQ Scale

and ZP900 Ethernet connectors as it may damage the internal ZP900 Ethernet port components.

Serial RS232 connector: If supplied, the serial cable is attached to the removable green terminal connector

per the wiring list instruction. Refer to the default settings to determine which serial port will be used.

The default settings for the serial ports are as follows:

Port 1 : SMA protocol, 9600, 8, n ,1 allows for connection directly to the optional ZP900 remote display.

Port 2 : NCI protocol, 9600, 7, e, 1 matches the protocol of the NCI 7600 series scale.

USB HID connectors: If enabled, the 2 USB ports provide HID communication with UPOS or OPOS compliant

interface software. Refer to the software vendor specifications to determine if it will support the USB HID

interface. No special configuration of the ZP900 is required to use the USB HID protocol.

Ethernet connector: If enabled, the ZP900 Ethernet TCP/IP port uses the following default settings:

IP address: 192.168.1.91 Subnet: 255.255.255.0 Gateway: 0.0.0.0 DHCP: OFF

Server mode Port 10001 SMA protocol

Ethernet settings can be changed if required. Refer to the ZP900 Service manual or contact your scale provider

for details.

Power Input connector: On Desk mount models connect the power cable to either the ZP900 or the BSQ

power input connector. Power is supplied to the other device through the RJ45 scale interface cable. On the

Base mount model the PSU is mounted on the back of the BSQ base unit and connection to the AC source is

shown in a picture below.

PC Desc Color ZP900 Port 1 ZP900 Port 2

2 RXD Red TB3-2 (TX1) TB3-3 (TX2)

3 TXD Green TB3-4 (RX1) TB3-5 (RX2)

5 GNC Black TB3-1 TB3-1

Quartzell scale

connector

Serial connector USB HID

connector

USB HID

connector

Ethernet

connector

Power

connector

GND

TX1

TX2

RX1

RX2

+5V

12-36VDC 0.5A

Connect remote display and/or RS232 serial cable here

Connect scale base here

Initial power up: On power up the scale must be within the Power-Up Zero range of +/- 10% of capacity or the

message Z-Error is displayed. Remove the weight causing the error and the scale will zero and resume

operation.

Gravity Message: If display shows the message grAVitY on power up refer to the User manual for details on

setting the local gravity value.

BSQ connections

Refer to the photos below when making the initial connections to the BSQ.

Back of PSU powered scale Back of battery powered scale

Battery pack connectionsPSU connections

Connect indicator here. Connect indicator here.

ZP900_BSQ_connections_i_en_501511.fm AWT35-501511 Issue AA

Avery Weigh-Tronix USA

1000 Armstrong Dr.

Fairmont MN 56031 USA

Tel: 507-238-4461

Fax: 507-238-4195

Email: [email protected]

www.averyweigh-tronix.com

Avery Weigh-Tronix UK

Foundry Lane,

Smethwick, West Midlands,

England B66 2LP

Tel: +44 (0)870 903 4343

Fax: +44 (0)121 224 8183

Email: [email protected]

www.averyweigh-tronix.com

Andere Handbücher für ZP900

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Avery Weigh-Tronix Skala Handbücher

Avery Weigh-Tronix

Avery Weigh-Tronix Brecknell B240 Bedienungsanleitung

Avery Weigh-Tronix

Avery Weigh-Tronix PC-220 Bedienungsanleitung

Avery Weigh-Tronix

Avery Weigh-Tronix Reflex HP Series Bedienungsanleitung

Avery Weigh-Tronix

Avery Weigh-Tronix HC12000 Bedienungsanleitung

Avery Weigh-Tronix

Avery Weigh-Tronix ZP2 Series Bedienungsanleitung

Avery Weigh-Tronix

Avery Weigh-Tronix PC-820 Bedienungsanleitung

Avery Weigh-Tronix

Avery Weigh-Tronix ZK830 Bedienungsanleitung

Avery Weigh-Tronix

Avery Weigh-Tronix TT-830 Bedienungsanleitung

Avery Weigh-Tronix

Avery Weigh-Tronix 1000 Bedienungsanleitung

Avery Weigh-Tronix

Avery Weigh-Tronix 7820-50 Bedienungsanleitung

Avery Weigh-Tronix

Avery Weigh-Tronix 3275 Bedienungsanleitung

Avery Weigh-Tronix

Avery Weigh-Tronix PC-220 Bedienungsanleitung

Avery Weigh-Tronix

Avery Weigh-Tronix TT-830 Bedienungsanleitung

Avery Weigh-Tronix

Avery Weigh-Tronix PC-805 Bedienungsanleitung

Avery Weigh-Tronix

Avery Weigh-Tronix ZK840 Bedienungsanleitung

Avery Weigh-Tronix

Avery Weigh-Tronix ZM 110 Bedienungsanleitung

Avery Weigh-Tronix

Avery Weigh-Tronix FLSC 05 Bedienungsanleitung

Avery Weigh-Tronix

Avery Weigh-Tronix QC-3265 Bedienungsanleitung

Avery Weigh-Tronix

Avery Weigh-Tronix RD40RF Bedienungsanleitung

Avery Weigh-Tronix

Avery Weigh-Tronix RLP Bedienungsanleitung

Avery Weigh-Tronix

Avery Weigh-Tronix AWB 120 Bedienungsanleitung

Avery Weigh-Tronix

Avery Weigh-Tronix PC-802 Bedienungsanleitung

Avery Weigh-Tronix

Avery Weigh-Tronix FLI 225 Bedienungsanleitung

Avery Weigh-Tronix

Avery Weigh-Tronix G235 Bedienungsanleitung

Beliebte Skala Handbücher anderer Marken

AWS

AWS ZEO-50 Bedienungsanleitung

Gima

Gima Glass Body Fat Analyzer Stücklistenhandbuch

Seca

Seca 374 Bedienungsanleitung

TEC

TEC TEC SL59 SERIES Bedienungsanleitung

Axis

Axis B/E Series Bedienungsanleitung

Alecto

Alecto ACW-40 Bedienungsanleitung

Rice Lake

Rice Lake MSI-4260 IS Bedienungsanleitung

IKA

IKA RCT basic safety control Bedienungsanleitung

ADE

ADE M20011 Bedienungsanleitung

Duronic

Duronic KS3000 Bedienungsanleitung

Digi

Digi SM-720 Bedienungsanleitung

Cardinal

Cardinal CS Series Bedienungsanleitung

Korona

Korona Kastella Bedienungsanleitung

A&D

A&D FC-50Ki Bedienungsanleitung

BDA

BDA CAMARGUE Bedienungsanleitung

Tanita

Tanita HD-357 Bedienungsanleitung

Leifheit

Leifheit 03173 Bedienungsanleitung

Lumme

Lumme LU-1340 Bedienungsanleitung