AVGear AVG-UHS24 Bedienungsanleitung

AVG-UHS24

Features

◼Supports HDMI 2.0 and video

resolutions up to 4K@60Hz 4:4:4.

◼HDMI inputs support HDCP 2.2 and

the outputs support HDCP1.4.

◼Supports video resolution down-

scaling, the 4K@60Hz input can be

automatically downscaled to 1080P

output for compatibility with a1080P

display.

◼18Gbps high bandwidth.

◼Features RCA (L/R) jack and Toslink

connector for de-embedded audio.

◼Advanced EDID management: multiple

presets and user defined options.

◼Built-in equalizer for signal

enhancement to avoid signal

attenuation in transmission.

◼Supports CEC control to turn the

displays on/off and adjust their volume.

◼LED indicators display the operating

status.

◼Firmware update via Micro-USB port.

The AVG-UHS24 is an ultra thin 2x4 switcher splitter

with two HDMI inputs and four HDMI outputs. This

switcher splitter supports HDMI video resolutions up

to 4K@60Hz 4:4:4, 1080P and multichannel audio.

There are multiple built-in EDID settings or it will use

the EDID from the display. The switcher will de-

embed digital stereo audio to provide an analog audio

source for an existing audio system.

AVG-UHS24

PLEASE READ THIS PRODUCT MANUAL CAREFULLY

BEFORE USING THIS PRODUCT.

This manual is only for operational instruction only,

and is not to be used in a maintenance capacity. The

functions described in this version are current as of

July 2018. Any changes of functions and operational

parameters will be updated in future manual versions.

Please refer to your dealer for the latest product

details.

Version 1.0 3/7/18

AVG-UHS24

SAFETY OPERATION GUIDE

In order to guarantee the reliable operation of the equipment and safety of the

user, please abide by the following procedures in installation, use and

maintenance:

1. The system must be earthed properly. Please do not use two blade plugs

and ensure the AC power supply ranges from 100v to 240v and from 50Hz

to 60Hz.

2. Do not install the switcher in an environment where it will be exposed to

extreme hot or cold temperatures.

3. This unit will generate heat during operation, please ensure that you allow

adequate ventilation to ensure reliable operation.

4. Please disconnect the unit from mains power if it will be left unused for a

long time.

5. Please DO NOT try to open the casing of the equipment, DO NOT attempt to

repair the unit. Opening the unit will void the warranty. There are high

voltage components in the unit and attempting to repair the unit could result

in serious injury.

6. Do not allow the unit to come into contact with any liquid as that could result

in personal injury and product failure.

AVG-UHS24

TABLE OF CONTENTS

Introduction .............................................................................................................1

Introduction to the AVG-UHS24 ...................................................................1.1

Features ......................................................................................................1.2

What’s in the Box .........................................................................................1.3

Panel Description of the AVG-UHS24.....................................................................2

Front Panel ..................................................................................................2.1

Rear Panel ...................................................................................................2.2

System Connection .................................................................................................3

Usage Precautions ......................................................................................3.1

System Diagram...........................................................................................3.2

System Application.......................................................................................3.3

EDID Management ...................................................................................................4

Firmware Upgrade ...................................................................................................5

Specifications ..........................................................................................................6

Panel Drawing ..........................................................................................................7

Troubleshooting & Maintenance.............................................................................8

AVG-UHS24

1. Introduction

1.1 Introduction to the AVG-UHS24

The AVG-UHS24 is an ultra thin 2x4 switcher splitter with two HDMI inputs and four

HDMI outputs. This unit supports HDMI video resolutions up to 4K@60Hz 4:4:4,

1080P and multichannel audio. There are multiple built-in EDID settings or it will use

the EDID from the display. The switcher will de-embed digital stereo audio to provide

an analog audio source for an existing audio system.

CEC technology can be used to turn on/off the displays and adjust volume by using

the control buttons on the front panel.

1.2 Features

◼Supports HDMI 2.0 and video resolutions up to 4K@60Hz 4:4:4.

◼HDMI inputs support HDCP 2.2 and the outputs support HDCP1.4.

◼Supports video resolution down-scaling, the 4K@60Hz input can be

automatically degraded to 1080P output for compatibility with 1080P display.

◼18Gbps high bandwidth.

◼Features RCA (L/R) jack and Toslink connector for de-embedded audio.

◼Advanced EDID management: multiple presets and user defined allowed.

◼Built-in equalizer for signal enhancement to avoid signal attenuation in

transmission.

◼Supports CEC control to turn the displays on/off and adjust their volume.

◼LED indicators display the operating status.

◼Firmware update via Micro-USB port.

AVG-UHS24

1.3 What’s in the Box

▪1 x AVG-UHS24 2x4 Splitter

▪2 x Mounting ears with 4 Screws

▪4 x Rubber Feet

▪1 x Power Adapter (DC 12V 1A)

▪1 x User Manual

Note: Please confirm if the product and the accessories are all included, if not,

please contact your dealer.

AVG-UHS24

2. Panel Description

2.1 Front Panel

1. POWER LED: The LED illuminates red when power is applied.

2. OUTPUT LEDs: The LED illuminates green when there is HDMI output on the

corresponding channel.

3. SOURCE Button and LEDs:

◼Press the button to switch to next source device, and then the corresponding input

LED will illuminate green.

◼Press and hold the button at least three seconds to enable automatic switching mode.

The splitter will automatically select the first available active source device starting at

HDMI input 1.

✓Upon detecting a new source device, the splitter will automatically select the new

one. When an active source device is removed, the splitter will switch to the next

available one.

✓After restarting the splitter, it will return to the last switch state.

◼Press and hold the button for at least three seconds again to exit automatic switching

mode, and the current output won’t be changed.

4. DISPLAY ON Button and LED: Press the button to turn on the displays. The LED blinks

green when you press this button.

5. DISPLAY OFF Button and LED: Press the button to turn off the displays. The LED

blinks green when you press this button.

6. VOLUME DOWN/MUTE Button: Press the button to decrease the volume of the

displays. Press and hold this button for at least three seconds to mute the displays.

7. VOLUME UP Button: Press the button to increase the volume of the displays or exit

mute mode if the displays are already muted.

8. EDID: 3-pin DIP Switch for the Extended Display Identification Data (EDID) value setting.

Please refer to the EDID Management for more details.

9. FW: Micro-USB port for firmware updates.

Note: Only displays that support CEC can be controlled by DISPLAY ON, DISPLAY OFF,

VOLUME UP and VOLUME DOWN buttons.

123456798

AVG-UHS24

2.2 Rear Panel

①INPUTS: Two type-A female HDMI input ports to connect your HDMI sources.

②OUTPUTS: Four type-A female HDMI output ports to connect your HDMI displays.

③AUDIO OUT: RCA jack for stereo analog audio output.

④SPDIF OUT: Toslink connector for digital audio output.

⑤EDID: 4-pin DIP switch for EDID setting. Please refer to the EDID Management for

more details.

⑥DC 12V: DC barrel port to connect an AC power adapter.

123456

AVG-UHS24

3. System Connection

3.1 Usage Precautions

1. The system should be installed in a clean environment with temperature and

humidity maintained to within equipment specifications.

2. All of the power switches, plugs, sockets and power cords should be insulated

and safe.

3. All the HDMI and control devices should be connected before powering on.

3.2 System Diagram

The following diagram illustrates a typical input and output connection that could be

used with the AVG-UHS24.

3.3 System Application

Robust performance for control and signal transmission makes the AVG-UHS24 ideal

for use in the custom installation industry, IT, signal monitoring, large screen

displays, conference systems, television broadcast, education, banking and security

institutions etc.

OFF

IN 1

IN 2

4K Blu-ray Soundbar

STB

HDTV

Speaker

HDTV

HDMI 2.0 Tx

HDMI 2.0 Rx

HDTV

HDMI IN:

HDMI OUT:

AUDIO:

HDBaseT:

AVG-UHS24

4. EDID Management

The Extended Display Identification Data (EDID) is used by the source device to match its

video resolution with the connected display. By default, the source device obtains its EDID

from the first connected display. When displays with different resolutions are connected to

the splitter, the 3-pin DIP switch on the front panel and the 4-pin DIP switch on the rear panel

can be used in combination to set the EDID to a fixed value.

Switch Status

Description

L.RES

The splitter reads all EDID information from all connected displays,

and choose the one with lowest resolution passing to the source.

PRESET

In this mode, the 4-pin DIP switch on the rear panel can be used to

select predefined EDID and customize a specific EDID as need.

H.RES

The splitter reads all EDID information from all connected displays,

and choose the one with highest resolution passing to the source.

⚫Predefined EDID setting

When the 3-pin DIP switch on the front panel is in PRESET mode, the 4-pin DIP switch on

the rear panel can be used to set the EDID to a built-in fixed value. Use the following table to

determine the settings for the 4-pin DIP switch for specific video resolution and audio

capabilities.

When in the lower position, the switch represents “1”, while putting the switch in the upper

position, it represents “0”.

Inhaltsverzeichnis

Andere AVGear Schalten Handbücher

AVGear

AVGear AVG-SC51D Bedienungsanleitung

AVGear

AVGear AVG-UHC41A Bedienungsanleitung

AVGear

AVGear AVG-SCU41-MV Bedienungsanleitung

AVGear

AVGear avg-uhs41-v2 Bedienungsanleitung

AVGear

AVGear AVG-MS88-HDBT Bedienungsanleitung

AVGear

AVGear AVG-SC42T Bedienungsanleitung

AVGear

AVGear AVG-CSK-HD44 Bedienungsanleitung

AVGear

AVGear AVG-SC51T Bedienungsanleitung

AVGear

AVGear AVG-DSS61 Bedienungsanleitung

AVGear

AVGear AVG-SC121D-TN Bedienungsanleitung

AVGear

AVGear AVG-SM-2.0 Bedienungsanleitung

AVGear

AVGear AVG-UHS41 DA Bedienungsanleitung

AVGear

AVGear MHD44 Bedienungsanleitung

AVGear

AVGear AVG-DMM1616 Bedienungsanleitung

AVGear

AVGear AVG-SC91T Bedienungsanleitung

AVGear

AVGear AVG-HDE2 Bedienungsanleitung

AVGear

AVGear AVG-UDA24-HD70 Bedienungsanleitung

AVGear

AVGear AVG-UHS41 DA Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung