Avidyne AXP340 MODE S Handbuch

Pg Chg

Cover.. . 0

Page #.. 0

TOC-1.. 0

1…… 0

2……. 0

3……. 0

4……. 0

5….... 0

6…… 0

7…… 0

8.… 0

9…… 0

10…. 0

11….. 0

12….. 0

13….. 0

14….. 0

15….. 0

16….. 0

17….. 0

18….. 0

19….. 0

Index….0

Inside Back Cover 0

Outside Back Cove .0

AXP340 Mode S Transponder with ADS-B Out | PILOT GUIDE

TABLE OF CONTENTS

SYSTEM OVERVIEW......................................................................1

FUNCTIONAL OVERVIEW .............................................................2

DISPLAY .........................................................................................3

BEZEL CONTROLS ........................................................................3

Selector Knob..........................................................................................3

Numeric Buttons ......................................................................................3

CLR.........................................................................................................3

IDENT......................................................................................................3

VFR.........................................................................................................4

FUNC ......................................................................................................4

POWER ON/OFF.............................................................................5

MODE CONTROL ...........................................................................6

SQUAWK CODE ENTRY................................................................6

ADDITIONAL FUNCTIONS .............................................................7

Flight Timer..............................................................................................7

Stopwatch................................................................................................7

Flight ID entry ..........................................................................................8

Altitude Monitor........................................................................................8

ADS-B Monitor.........................................................................................9

BRIGHTNESS AND LIGHTING CONTROLS................................11

ALERTS.........................................................................................12

Alert Messages......................................................................................12

Fault Annunciation.................................................................................12

CONFIGURATION MODE.............................................................13

LOW TEMPERATURE OPERATION ............................................13

SOFTWARE UPDATES ................................................................14

PLUG AND PLAY DETAILS ..........................................................14

Deleted: 3

Deleted: 4

Deleted: 5

Deleted: 6

Deleted: 7

Deleted: 8

Deleted: 9

Deleted: 10

Deleted: 11

Deleted: 13

Deleted: 14

Deleted: 15

Deleted: 16

SYSTEM OVERVIEW

This manual assumes that the pilot is appropriately licensed, is

proficient in operation of the aircraft and its equipment, and is in

compliance with all Federal Aviation Regulations (FARs).

All images contained in this manual are for reference use only,

and are subject to change.

Avidyne strongly recommends that pilots use the AXP340 system

only under VFR conditions until completely familiar with its

operation and use.

Boxed areas marked as NOTE within this manual identify certain

situations or areas of operation having safety implications. While

it is important for the operator to be familiar with all of the

information in the manual, it is essential to the safe use of the

AXP340 that pilots give careful attention to the material contained

within these NOTEs.

AXP340 Mode S ADS-B Out Transponder

The AXP340 is a panel-mount Mode S transponder with support

for 1090 MHz Automatic Dependent Surveillance Broadcast

(ADS-B) Extended Squitter (ES), also known as “ADS-B Out” that

meets all the requirements for Mode S elementary surveillance

transponders for both IFD and VFR flight.

The AXP340 transmits up to 240 watts and responds to both

legacy Mode A/C interrogations and to Mode S interrogations

from both ground radar and airborne collision avoidance systems.

It transmits the required ADS-B Out signals including GPS-

derived position along with ground track, ground speed, and

altitude information.

FUNCTIONAL OVERVIEW

The Avidyne AXP340 Mode S ADS-B Transponder supports the

following functions:

Mode C transponder operations;

Mode S transponder operations;

ADS-B Out compliant;

Flight Timer;

Stopwatch;

Altitude Monitor;

Flight ID reporting.

COOL FEATURE

ADS-B Compliance

When combined with any of Avidyne’s TAS6X0A

ADS-B capable Traffic Advisory Systems, and an

ADS-B compliant GPS source and display (e.g.

Avidyne IFD540 or 440), the combined system will

meet the full 1090 MHz ADS-B compliant mandate.

AXP340 Transponder

Selector Knob

Clear

Ident

DISPLAY

The display shows the operating mode of the transponder, the

reported pressure altitude, and the current squawk code. The

reply indicator is active when the transponder replies to

interrogations and the IDENT indicator is active when the bezel

IDENT button is pressed.

The reported altitude is displayed as a Flight Level, which is the

pressure altitude in hundreds of feet. When non-standard

atmospheric conditions apply, this may not match the altimeter

indicated altitude, but will be correctly displayed by the ATC

radar.

BEZEL CONTROLS

SELECTOR KNOB

The selector knob on the right side of the front panel is used to

select data such as characters for Flight ID or move through the

menu options. Pressing the selector knob confirms the selection

or selection of the options presented. A label on the right side of

the display describes the action when the selector knob is

pressed.

NUMERIC BUTTONS

The numeric buttons are used to select a new Squawk code or

flight ID numbers. Pressing buttons 0 through 7 will immediately

edit the current squawk code unless in flight ID edit.

CLR

Press the CLR button to return to original settings or back space

through partially complete data entry or reverse through a menu.

IDENT

Press the IDENT button when ATC instructs you to “Ident” or

“Squawk Ident”. This activates the ident pulse in the transponder

for 18 seconds. “IDENT”will appear in the display.

VFR

Pressing the VFR button sets the transponder to the pre-

programmed regional VFR code. Pressing the button again

restores the previous squawk code.

Pressing the VFR button while in Flight ID edit changes the Flight

ID to the pre-programmed ID set up during configuration of the

transponder.

FUNC

Pressing the FUNC button provides access to the flight timer,

stopwatch, Flight ID editing, ADS-B monitor (depending on

installation), altitude monitor and front panel dimming.

POWER ON/OFF

The AXP340 will automatically power on when avionics power is

applied and will display the Avidyne logo, product identification

and software version information while the unit is self-testing.

AXP340 Initialization Screen

Following a successful power-on self-test, the AXP340 will

transition to Standby mode (STBY) and present the squawk code

and Reported Altitude display page.

The AXP340 will automatically transition to ALT mode during

takeoff roll.

To manually power the AXP340 off, press and hold the MODE

button for at least 3 seconds. A countdown timer will be

displayed on the left side of the display and the unit will

completely power down upon reaching 0. To manually power the

AXP340 on following a manual power off, press and hold the

MODE button for approximately 1 second.

Manual Power Off Method

MODE CONTROL

The MODE button also controls the operation mode of the

transponder.

The following table shows the progression through the states:

ALT

The transponder will respond to all interrogations.

The transponder will respond to all interrogations, but altitude

reporting is suppressed.

SBY

The transponder is on, but will not reply to any interrogations.

When airborne, the transponder should always be set to ALT

unless otherwise directed by Air Traffic Control. Aircraft

installations that include a gear squat switch will automatically

select GND on landing or while taxiing.

SQUAWK CODE ENTRY

Press any of the numeric buttons (0 through 7) to start modifying

the squawk code. A new squawk code is set when the fourth

digit is entered. If the code entry is not completed within 7

seconds, the changes are ignored and the previous code

restored.

Some standard squawk codes are listed below

1200

VFR code in the USA

7000

VFR code commonly used in Europe

7500

Hijack code

7600

Loss of communications

7700

Emergency code

Andere Handbücher für AXP340 MODE S

Inhaltsverzeichnis

Andere Avidyne Seefunkgerät Handbücher

Avidyne

Avidyne AXP340 MODE S Bedienungsanleitung

Beliebte Seefunkgerät Handbücher anderer Marken

Garmin

Garmin GTX 45R Bedienungsanleitung

Garmin

Garmin GTX 33 Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane TT-6222A VHF DSC Bedienungsanleitung

Garmin

Garmin VHF 315 Series Bedienungsanleitung

Vesper

Vesper Cortex HV1 Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane Sailor RT5022 VHF DSC Bedienungsanleitung

Saab

Saab R5 SUPREME AIS Bedienungsanleitung

AMEC

AMEC CAMINO-701 Bedienungsanleitung

GME

GME GX800 Bedienungsanleitung

West Marine

West Marine VHF580 Bedienungsanleitung

Uniden

Uniden UM425 VHF DSC Bedienungsanleitung

ACR Electronics

ACR Electronics AISLink CB2 Bedienungsanleitung

Barco

Barco MDSC-2226 Bedienungsanleitung

Blue Mark

Blue Mark DroneBeacon 120 Series Bedienungsanleitung

Simrad

Simrad DSC1400 Bedienungsanleitung

Raveon

Raveon RV-M8G Bedienungsanleitung

Trig Avionics

Trig Avionics TT31 Bedienungsanleitung

Uniden

Uniden UM380 Bedienungsanleitung