Avigilon ACC Handbuch

Initial ACC™ System Setup andWorkflow Guide

If you are setting up an Avigilon Control Center (ACC) system for the first time, complete the following

recommended setup procedures. Other features can be set up and adjusted as required.

For an overview of the procedures that should be performed before you arrive at site, see Pre-Site

Checklist on pageA.

For an overview of the procedures that should be performed at site, see System Setup Checklist on pageC.

More detailed information about each of the procedures in this guide is available on help.avigilon.com/acc.

Before Arriving On-Site 2

Network Setup 2

Install Hardware and Software 3

Managing Certificates on the ACC Server 5

Configure Anti-Virus Settings 7

Configure Sites and Servers 8

Activate Site Licenses 12

Configure Devices 14

Add Users and Groups 32

Customize Video Monitoring Setup 35

Avigilon Cloud Services 38

External Notifications 39

For More Information 41

Initial ACC™ System Setup andWorkflow Guide 1

Before Arriving On-Site

Important: If this is the user's first ACC 7 Server or if the server will be upgraded to ACC 7 software

for the first time, see the Avigilon Licensing Portal User Guide. You may need to contact Avigilon

Order Management to set up the user's Company account, Customer Administrator account, and

Customer User accounts.

Pre-configure the network video recorders as much as possible and familiarize yourself with the system

design and the customer network setup to streamline the setup process.

For more information, see Pre-Site Checklist on pageA.

Network Setup

For most systems using Avigilon-certified network video recorders (NVRs) and NVR workstations, no

network configuration is required.

If your system uses zero-configuration networking (Zeroconf), follow the guidelines below to use a static IP

address or DHCP enabled network instead.

IPAddressing

Plan the IP addressing scheme for server network ports, cameras, devices, and viewing stations.

1. Determine the number and type of network interface card (NIC) ports of the server.

2. Determine the quantity and location of the cameras and devices. Refer to the system design files to

determine how many server NICs are required for inbound video traffic and group cameras and

devices accordingly.

3. If the cameras and devices are grouped, assign each group to a unique IP subnet. Use a subnet mask

that defines the required network scope (for example, networks with less than 250 devices generally

use a 255.255.255.0 subnet mask).

4. Assign one server NIC port for outbound video traffic. Assign only one default network gateway to it.

This will connect to the customer's network where the viewing stations are and also for Internet

access.

5. Use the other server NICs for the camera network. These are for inbound video traffic.

lEach NIC belongs to one unique IP subnet.

lIf using VLANs, one subnet should belong to one unique VLAN.

lDo not assign any default network gateway to these NICs. Camera traffic should be as local as

possible.

lAssign one static private IP address to each NIC. If using DHCP, use IP address reservation so

each NIC always gets the same unique IP address.

lFor the initial setup:

Before Arriving On-Site 2

lIf using Static IPaddressing:

lAssign a temporary second IP address to each NIC. This is a unique Zeroconf IP

address of 169.254.x.x network with a 255.255.0.0 subnet mask. After the cameras

and devices using the Zeroconf subnet are connected to the ACC Server, change

their IP addresses to the private IP address subnet of the server NIC.

For example, a server NIC has:

IP address / subnet mask: 192.168.10.10 / 255.255.255.0

Temporary IP address / subnet mask: 169.254.100.100 / 255.255.0.0

After cameras (with IP addresses 169.254.x.x) are connected to the ACC Server,

change the camera IP addresses to 192.168.x.x / 255.255.255.0 range.

lAfter the initial setup, remove the server NIC's temporary 169.254.x.x IP

addresses.

lIf using a DHCP enabled network:

lConsider the DHCP lease time configured on the DHCP server. When the lease

time expires, the cameras will negotiate an IP address renewal and this may

cause an interruption in the video streaming. This might appear as an abnormal

camera restart.

lSet the DHCP lease time to Forever, or long enough to minimize unnecessary

camera IP address renewals.

lIf possible, set DHCP reservations so each camera always gets the same unique

IP address.

Network Connectivity

Ensure each server NIC is connected to a network switch port that is 1 Gbps or higher.

The server NIC connected to the customer's network can have a 100 Mbps connection if the expected

outbound traffic is low.

Install Hardware and Software

Cameras and Devices

Install the cameras and devices according to the system design. Each device must be:

lConnected to the network.

lPositioned and focused in the direction specified in the system design.

lAssigned a descriptive name.

lAssigned an IPaddress (static or dynamic depending on network policy).

Before a camera is connected to the ACC system, it can be configured from the camera web interface or

using the Camera Configuration Tool.

Refer to the device installation guide for more information.

Network Connectivity 3

Tip: For bulk configuration, use the Camera Configuration Tool available on avigilon.com. You can

also use the device's web interface for configuration. If needed, use the Avigilon USBWifi Adapter

System to access the camera interface through a wifi network.

Video Recorders

Install the video recorders. An ACC system can feature NVRs, HD Video Appliances, or Avigilon Hardened

OS appliances. Each video recorder must be:

lConnected to the network — camera and corporate network as required.

lAssigned an IP address.

lAssigned a new password for the administrator account.

lAssigned a CA-signed certificate. Refer to your server documentation for details.

lWindows systems only:

lAssigned a unique name.

lConnected to an uninterruptible power supply (UPS). Refer to your server documentation for

details.

lConfigured for NTP time synchronization. Refer to your server documentation for details.

Refer to the recorder installation guide for more information. If you are installing a Windows based NVR

system, see the Windows help files for more information.

ACC Software

Important: Upgrade to the latest version of ACC™ 5 software before upgrading to ACC 7 software

to avoid losing data.

If you're using version 5.4, upgrade to version 5.6.2.28 first, and then to the latest version of 5.10

software.

If you installed an Avigilon NVR, the ACC software is pre-installed. When you start the NVR, complete the

initial ACC configuration wizard.

If you installed a third-party NVR:

lDownload and install the latest ACC Server software and ACC Client software from avigilon.com.

lInstall the ACC Analytics Service to use the Avigilon Appearance Search feature and Face

Recognition.

Install the ACC Web Endpoint Service to use Avigilon Cloud Services, the ACC Mobile 3 app and web-

based integrations.

Video Recorders 4

Logging In

To open the ACC Client software:

lDouble-click the desktop shortcut icon .

lIn the Start menu, select All Programs or All Apps > Avigilon > Avigilon Control Center Client.

When logging in to the site for the first time, the default credentials use administrator as the username

without a password. You'll be asked to immediately enter a new password.

1. In the New Task menu , click Site Login.

2. Select your site from the list of connected sites.

If you don't see your site, click Find Site… to manually search your network.

3. Enter your credentials, or select Use current Windows credentials and click Log In….

Managing Certificates on the ACC Server

FOR WINDOWS SERVERS ONLY

By default, the ACC server uses a self-signed certificate for verifying client communications. Avigilon

recommends using a trusted CA-signed certificate or other intermediate certificate, such as a Windows CA

or custom CA certificate. You must be a Windows Administrator to make these changes.

If you are using a CA-signed certificate, you will need to disable trust of the default Avigilon certificates after

setting up your CA-signed certificates to ensure the default certificate can no longer be used.

Important: When logging into the server from a client after setting up your certificate, you will need

to use the full hostname, including the domain.

Generating the Certificate

1. On the Windows machine running the ACC server, open the Certificate Manager. Select Run in the

Start menu and enter certlm.msc.

2. Navigate to the Personal > Certificates folder.

3. Right-click in the folder contents area and select All Tasks > Request New Certificate....

4. Click Next.

5. In the Select Certificate Enrollment Policy window, select the Active Directory Enrollment Policy and

click Next.

6. In the Request Certificates window, select the Avigilon Computer checkbox, then expand the Details

drop-down arrow and click Properties.

7. On the General tab, enter the Friendly Name as AccServerCert.

Logging In 5

Important: Make sure to enter the correct Friendly Name, AccServerCert, or the ACC server

and clients will not recognize the certificate and will fail to connect.

8. On the Private Key tab, in the Key options area, fill the Make private key exportable checkbox.

9. Click OK.

10. On the Request Certificates Window, click Enroll. Click Finish when the operation is complete.

Exporting the Certificate and Private Key

1. Using the certlm.msc tool, right-click the new certificate and select All Tasks > Export....

2. Click Next.

3. Select Yes, export the private key and click Next.

4. Leave the Export File Format settings as default and click Next.

5. On the Security window:

a. Select the Group or user names (recommended) checkbox and select the Active Directory

group or user to which you want to assign access to the certificate and private key.

b. Click Add.

c. Click Next.

6. Enter the name and location for the exported certificate, or click Browse to navigate to the location

where you want to save the exported certificate. Click Next.

7. Click Finish to export the certificate and private key.

Importing the Private Key

1. Using the certlm.msc tool, right-click in the Personal > Certificates folder contents area and select All

Tasks > Import....

2. Click Next.

3. On the File to Import window, enter the certificate name and path in the File name field or click

Browse to navigate to the certificate you want to import. Click Next.

4. Select the Import option to Mark the key as exportable and Include all extended properties, then

click Next.

5. Leave the settings as default and click Next.

6. Click Finish.

Exporting the Certificate and Private Key 6

Configure Anti-Virus Settings

When anti-virus software runs an automated scan on a heavily utilized Avigilon NVR or workstation, it may

prevent video data from being written. Some anti-virus software packages are equipped with live process

scanning and incorporated firewalls. These features may cause communication failures between cameras

and NVRs or between NVRs and clients.

You may need to set up exceptions in the anti-virus software running on NVRs, workstations or clients within

the ACC system. For more information on how to exclude locations and applications from being scanned,

see your anti-virus software manual.

Preventing Data Write Issues

To ensure the anti-virus software does not interfere with the ACC software's ability to write video data and

other important files, exclude the following locations from being scanned:

AvigilonData Located on each of the Primary and Secondary Data Volumes.*

AvigilonConfig Located on each of the Config Volumes.*

Avigilon Program Files Located at C:\Program Files\Avigilon.

*Do not use the C drive or an OSdrive for these volumes. To see which drives are configured as the Primary

and Secondary Data Volumes and Config Volumes, use the ACC Admin Tool.

lIn the Admin Tool, click Settings >Storage.

The Primary and Secondary Data Volumes and Config Volumes are displayed.

Preventing Network Communication Failure

To prevent communication failure, exclude the following from having their network traffic scanned or

analyzed:

Configure Anti-Virus Settings 7