AVK ACMO 879 Series Gebrauchsanweisung

INSTALLATION, OPERATION & MAINTENANCE MANUAL

Ver. 1.6

Rev. 02 - 20210309

ACMO-AVK_IOM_valve-timer_M117_EN_2021

ACMO-AVK DIAPHRAGM

AUTOMATIC CONTROL VALVE

SERIES 879 - M117

VALVE TIMER HKEY

INDEX

1.0 Intro

2.0 KEY: Turning on/off

3.0 Main menus

3.1 Device information menu

3.2 Program menu

3.3 BASE connection menu

4.0 Launch menu

4.1 Option 1) “BASE” manual mode

4.1.1 Valve manual activation and deactivation

4.2 Option 2) “BASE” automatic mode

4.2.1 “BASE” automatic mode (waiting for activation)

4.2.2 “BASE” automatic mode (activated)

4.3 Option 3) “BASE” low battery lock

5.0 BASE menu

5.1 Automatic mode menu

5.2 BASE set up menu

5.2.1 Display BASE program

5.2.2 Copy BASE program

5.2.3 Send BASE program

5.2.4 Change ID number on this BASE

5.2.5 Restore the BASE to factory settings

5.3 BASE: Turning on/off

5.4 Historical data management menu

ACMO-AVK | IOM Manuals

ACMO-AVK AUTOMATIC CONTROL VALVE SERIES 879

M117 VALVE TIMER HKEY - ver. 1.6

The designs, materials and specifications shown are subject to change without notice. This is due to the continuous development of our product programme.

Unauthorized use is forbidden.

ACMO-AVK_IOM_valve-timer_M117_EN_02-20210309

1.0 INTRO

The timer activates and deactivates a hydraulic valve at preset times. It is made up of two parts, a

“programming card” (hereinafter the KEY) and a “control unit” (hereinafter the BASE), which activates

the hydraulic valve through a solenoid.

The KEY is made up of a display and four buttons, it communicates with the BASE by radio signal at

short distances. A non-rechargeable battery feeds the two parts. The battery is sized to last ten years,

considering an ordinary use of the system. Timer information is available through the KEY. When the

KEY connects to the BASE wirelessly, it shows the state the BASE is in, it allows setting a new program,

activating /deactivating the valve manually, although not in program.

Here below an example of how to set up the BASE.

The example shows the duration and the time of the turns t1, t2, t3. The first turn starts at 10:00, lasts 2

h and 5 min, the second starts at 15:45, lasts 10 min, the third starts at 19:30, and lasts 45 min. No turns

are set on Saturday and Sunday, t2 is set on Monday, t3 on Tuesday and Wednesday, all turns (t1, t2 and

t3) are set on Thursday, and finally, t1 is set on Friday. There is the possibility to activate no turns/day, all

turns/day or a combination of the three turns/day.

Sun Mon Tue Wed Thu Fr Sa

0 2 3 3 + 1 0

t1 10:00 x 02:05

t2 15:45 x 00:10

t3 19:30 x 00:45

The designs, materials and specifications shown are subject to change without notice. This is due to the continuous development of our product programme.

Unauthorized use is forbidden.

ACMO-AVK | IOM Manuals

ACMO-AVK AUTOMATIC CONTROL VALVE SERIES 879

M117 VALVE TIMER HKEY - ver. 1.6

ACMO-AVK_IOM_valve-timer_M117_EN_02-20210309

2.0 KEY: TURNING ON/OFF

Press the OK / turn on button for 3 sec. to turn on the KEY.

Press the OK / turn on button for 3 sec. to turn off the KEY.

Note that the KEY turns off automatically after an inactivity time (presettable), calculated from the last use

of the buttons. When the device turns on, some information about the firmware appears.

After 3 seconds the main menu appears.

In case of low battery, the device informs the user it is necessary to replace the battery of the KEY.

Press the OK / turn on button to continue using the KEY, nevertheless, for a correct functioning, it is highly

recommended to replace the battery as soon as possible.

Functions of the KEY buttons:

• OK button: use it to enter, confirm, modify, memorize.

• ESC button: use it to exit, cancel, deny.

• Arrow button: use it to increase/decrease values, move from a menu to another.

LOW BATTERY

OK = CONTINUE

ACMO-AVK | IOM Manuals

ACMO-AVK AUTOMATIC CONTROL VALVE SERIES 879

M117 VALVE TIMER HKEY - ver. 1.6

The designs, materials and specifications shown are subject to change without notice. This is due to the continuous development of our product programme.

Unauthorized use is forbidden.

ACMO-AVK_IOM_valve-timer_M117_EN_02-20210309

3.0 MAIN MENUS

3.1 DEVICE INFORMATION MENU

Use the arrow button to scroll the menus; press the OK button to enter a menu. Press the ESC button to

exit a menu and return to its title. Now it is possible to scroll again the menus and choose another menu.

Enter the menu to visualize and/or modify the date and time of the KEY.

The “information menu” displays the date, the time and battery status of the KEY as per the following

example:

Press the OK button to modify the year using the arrow buttons, press again the OK button to modify the

month, repeat the operation to modify the day, the hour, and the minute until coming back to beginning

of the “device information menu”. The nn,nn value is the internal battery measurement expressed in Volt;

depending on the value recorded the display shows:

LEVEL: HIGH

LEVEL: MEDIUM

LEVEL: LOW

Press again the arrow button to visualize the card time zone with reference to the Coordinated Universal

Time (UTC). 00:00 indicates the time zone of London.

INFORMATION

OK=ENTER

Information

Date: 21/03/16

Time: 09:45

Battery: nn,nnV

Level: HIGH

OK=MODIFY ESC=EXIT

Information

Time zone

UTC +00:00

OK=MODIFY ESC=EXIT

Press the OK button to change the time zone. Use the arrow button to select the desired time zone.

Press again the OK button to confirm and save the selected option.

The designs, materials and specifications shown are subject to change without notice. This is due to the continuous development of our product programme.

Unauthorized use is forbidden.

ACMO-AVK | IOM Manuals

ACMO-AVK AUTOMATIC CONTROL VALVE SERIES 879

M117 VALVE TIMER HKEY - ver. 1.6

ACMO-AVK_IOM_valve-timer_M117_EN_02-20210309

Press again the arrow button to display the card auto power off time:

Press the OK button to modify the time:

Press again the arrow button to display the buzzer status:

Press the OK button to enable or disable the buzzer:

Information

Auto power off

time

3 minutes

OK=MODIFY ESC=EXIT

3 minutes

Auto power off

Time modify

OK=SAVE ESC=EXIT

Information

Buzzer

ENABLED

OK=MODIFY ESC=EXIT

DISABLE

The buzzer ?

OK=YES ESC=NO

Information

FIRMWARE

v06.06 Lan: EN

ESC=EXIT

Information

Hardware W

v01.17 Type: O

Bootloader

v02.24

ESC=EXIT

Press the arrow button to discover the firmware and hardware version in the KEY:

ACMO-AVK | IOM Manuals

ACMO-AVK AUTOMATIC CONTROL VALVE SERIES 879

M117 VALVE TIMER HKEY - ver. 1.6

The designs, materials and specifications shown are subject to change without notice. This is due to the continuous development of our product programme.

Unauthorized use is forbidden.

ACMO-AVK_IOM_valve-timer_M117_EN_02-20210309

PROGRAM

OK=ENTER

Sun Mon Tue Wed Thu Fr Sa

0 2 3 3 + 1 0

t1 10:00 x 02:05

t2 15:45 x 00:10

t3 19:30 x 00:45

3.2 PROGRAM MENU

Enter the menu to display and modify the valve automatic program.

Press the OK button to select the program and display the automatic parameters to activate/deactivate the

valve. Below, an example of BASE programming:

Press the OK button to modify the match of turns and days of the week. Use the arrow button to choose

one or more turns. Press again the OK button to move to the following day until the last day of the week.

Press the down arrow button to enter the menus to change the three turns. Press the OK button to change

the starting time. Use the arrow button to modify the hour, then press the OK button to confirm and move

to the minutes. Use the arrow button to modify the minutes, then press the OK button to confirm and move

to the duration. Use the arrow button/OK button as above (hours and minutes). Press for the last time the

OK button to memorize the set values in this menu.

Program

t1 ACTIVATION

09:45 x 00:18

The designs, materials and specifications shown are subject to change without notice. This is due to the continuous development of our product programme.

Unauthorized use is forbidden.

ACMO-AVK | IOM Manuals

ACMO-AVK AUTOMATIC CONTROL VALVE SERIES 879

M117 VALVE TIMER HKEY - ver. 1.6

ACMO-AVK_IOM_valve-timer_M117_EN_02-20210309

A turn can last from a minimum of 1 minute to a maximum of 23 hours and 59 minutes.

After the last turn, press the down arrow button to move to the next menu:

Program

THRESHOLD FLOW

0,0 l/s

10% hysteresis

100 l/pulse

Press the OK button to modify the threshold flow, use the arrow buttons to set the value, and then press

the OK button to modify the hysteresis. Use the arrow buttons to set the value, and then press the OK

button to modify the pulse weight. Use the arrow buttons to set the value, and then press the OK button

to finish the programming and memorize the set values in this menu.

0.0 l/s means the threshold is disabled. The enabled threshold controls the flow rate only if the valve is

ACTIVE (automatic mode). If the flow rate exceeds the threshold, it DEACTIVATES the valve. The valve

ACTIVATES again once the flow rate falls below the threshold.

In case of instable flow rate, the adjustable hysteresis avoids activating or deactivating the valve

continually.

The pulse weight depends on the type of volume meter connected to the BASE. Program the pulse weight

according to the volume meter for a correct flow rate measure.

Press the down arrow button to enter the last menu and select the type of meter (ultrasonic/non-

ultrasonic).

Press the OK button to enable/disable the ultrasonic meter.

Press the OK button to confirm.

Program

Ultrasonic meter

DISABLED

ACMO-AVK | IOM Manuals

ACMO-AVK AUTOMATIC CONTROL VALVE SERIES 879

M117 VALVE TIMER HKEY - ver. 1.6

The designs, materials and specifications shown are subject to change without notice. This is due to the continuous development of our product programme.

Unauthorized use is forbidden.

ACMO-AVK_IOM_valve-timer_M117_EN_02-20210309

3.3 BASE CONNECTION MENU

Enter the menu to connect to the BASE and operate on it.

Note: Start the BASE before operating on it, see chapter “BASE turning on/off”.

Press the OK button to start the radio-scan to detect the BASE.

The following message appears when no BASE is detected:

If the radio scan detects more than one BASE, use the arrow button to choose.

Press the OK button to connect.

When the KEY detects only one BASE, it connects to the BASE directly. No confirmation needed. The

following messages confirm if the connection is successful. The messages display the ID number of the

BASE connected to the KEY.

Once connected, it is possible to enter the first BASE menus.

CONNECTION

OK=ENTER

RADIO

SCAN

DEVICES

OUT OF RANGE

Choose one of

03 devices

OK=ENTER ESC=EXIT

Selected

01 BAS id:00051

>01 BAS id:00051

02 BAS id:00012

03 BAS id:00549

OK=EXEC ESC=EXIT

Base

Code: 00051

The designs, materials and specifications shown are subject to change without notice. This is due to the continuous development of our product programme.

Unauthorized use is forbidden.

ACMO-AVK | IOM Manuals

ACMO-AVK AUTOMATIC CONTROL VALVE SERIES 879

M117 VALVE TIMER HKEY - ver. 1.6

ACMO-AVK_IOM_valve-timer_M117_EN_02-20210309

Andere Handbücher für ACMO 879 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis