AvLab ACEPRO-CEB-8-1 Bedienungsanleitung

HDMI 4K HDBaseT Wallplate Kit

User Manual

HDMI 4K HDBaseT Wallplate Kit

Preface

Read this user manual carefully before using the product. Pictures shown in this

manual are for reference only. Different models and specifications are subject to

real product.

This manual is only for operation instruction, please contact the local distributor

for maintenance assistance. The functions described in this version were updated

till April, 2019. In the constant effort to improve the product, we reserve the right to

make functions or parameters changes without notice or obligation. Please refer to

the dealers for the latest details.

FCC Statement

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful

interference to radio communications. It has been tested and found to comply with

the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful interference

in a commercial installation.

Operation of this equipment in a residential area is likely to cause interference, in

which case the user at their own expense will be required to take whatever

measures may be necessary to correct the interference.

Any changes or modifications not expressly approved by the manufacture would

void the user’s authority to operate the equipment.

HDMI 4K HDBaseT Wallplate Kit

SAFETY PRECAUTIONS

To ensure the best from the product, please read all instructions carefully before

using the device. Save this manual for further reference.

Unpack the equipment carefully and save the original box and packing

material for possible future shipment.

Follow basic safety precautions to reduce the risk of fire, electrical shock and

injury to persons.

Do not dismantle the housing or modify the module. It may result in electrical

shock or burn.

Using supplies or parts not meeting the products’ specifications may cause

damage, deterioration or malfunction.

Refer all servicing to qualified service personnel.

To prevent fire or shock hazard, do not expose the unit to rain, moisture or

install this product near water.

Do not put any heavy items on the extension cable in case of extrusion.

Do not remove the housing of the device as opening or removing housing

may expose you to dangerous voltage or other hazards.

Install the device in a place with fine ventilation to avoid damage caused by

overheat.

Keep the module away from liquids.

Spillage into the housing may result in fire, electrical shock, or equipment

damage. If an object or liquid falls or spills on to the housing, unplug the

module immediately.

Do not twist or pull by force ends of the cable. It can cause malfunction.

Do not use liquid or aerosol cleaners to clean this unit. Always unplug the

power to the device before cleaning.

Unplug the power cord when left unused for a long period of time.

Information on disposal for scrapped devices: do not burn or mix with

general household waste, please treat them as normal electrical wastes.

HDMI 4K HDBaseT Wallplate Kit

Table of Contents

1. Product Introduction........................................................................................ 1

1.1 Features.................................................................................................... 1

1.2 Package List.............................................................................................. 2

2. Specification...................................................................................................... 3

2.1 HDMI 4K HDBaseT Wallplate Transmitter............................................ 3

2.2 HDMI 4K HDBaseT Wallplate Receiver ................................................. 4

2.3 HDMI 4K HDBaseT Wallplate Control Panel ........................................ 5

3. Panel Description ............................................................................................. 6

3.1 HDMI 4K HDBaseT Wallplate Transmitter............................................ 6

3.2 HDMI 4K HDBaseT Wallplate Receiver ................................................. 7

3.3 HDMI 4K HDBaseT Wallplate Control Panel ........................................ 9

4. System Connection ........................................................................................ 11

4.1 Usage Precaution .................................................................................. 11

4.2 System Diagram .................................................................................... 11

4.3 Speaker Wiring Configurations............................................................ 12

4.4 PoC Connection ..................................................................................... 13

4.5 USB Connection..................................................................................... 13

4.6 IR Connection......................................................................................... 14

4.7 RS232 Connection ................................................................................. 15

5. System Operation........................................................................................... 16

5.1 IR Learning ............................................................................................. 16

5.2 Button Control ....................................................................................... 17

5.3 GUI Control............................................................................................. 18

5.3.1 Device Control Tab ...................................................................... 19

5.3.2 Setting Tab.................................................................................... 20

5.3.3 Command Tab (RS232 Display Control).................................... 21

5.3.4 Network Tab ................................................................................. 23

5.3.5 GUI Update................................................................................... 24

5.4 Copy and Load Control Settings .......................................................... 25

6. Panel Drawing................................................................................................. 26

7. Troubleshooting & Maintenance.................................................................. 28

8. After-sales Service.......................................................................................... 30

HDMI 4K HDBaseT Wallplate Kit

1. Product Introduction

The HDMI 4K HDBaseT Wallplate Kit is a multi-function AV distribution system

designed to provide HDMI video switching, system control, video extension and

analog audio amplification in a convenient kit. The system consists of HDMI-4K

HDBaseT Transmitter, HDMI-4K HDBaseT Receiver and HDMI-4K Control Panel.

Utilizing the Valens Colligo series chips, power, control, video up to 4K, and audio

are transported over a single 40m (131ft)/70m (230ft) solid core Category cable

between the wall plate transmitter and the receiver. The wall plate control panel

connects to the wall plate transmitter with a second solid core Category cable. All

the power needed for the system is provided by the receiver. Additionally, the

receiver features a built-in web GUI for control and analog audio de-embedding to

a built-in 2x20 watt stereo amplifier.

1.1 Features

Two HDMI inputs can be switched freely.

HDMI video resolution is up to 4Kx2K@60Hz 4:2:0.

Extends 4K@60Hz 4:2:0 signal up to 40m (131ft) and 1080p@60Hz signal up to

70m (230ft) via a single CATx cable.

USB for smart board connection.

Supports HDCP 1.4.

Supports MIC input.

2x20Watt@4Ohm amplifier output.

Customizable control panel, support IR learning.

Copy and load IR and RS232 control settings.

Supports GUI control.

Supports UPNP.

Micro USB for firmware upgrade.

HDMI 4K HDBaseT Wallplate Kit

1.2 Package List

Transmitter



1x HDMI 4K HDBaseT Wallplate Transmitter

Receiver



1x HDMI 4K HDBaseT Wallplate Receiver

2x Mounting Ears with 4 Screws

4x Plastic Cushions

1x 4-pin Terminal Block

3x 3-pin Terminal Blocks

1x 2-pin Terminal Block

1x IR Emitter

1x USB-A to USB-B Cable

1x Power Adapter (DC 24V 2.71A)

Control Panel



1x HDMI 4K HDBaseT Wallplate Control Panel

1x White Faceplate



1 x User Manual

Note:Please contact your distributor immediately if any damage or defect in the

components is found.

HDMI 4K HDBaseT Wallplate Kit

2. Specification

2.1 HDMI 4K HDBaseT Wallplate Transmitter

Video

Video Input (1) HDMI IN 1, (1) HDMI IN 2

Video Input Connector (2) 19-pin type-A female HDMI

Video Output (1) PoC IN/HDBT OUT, (1) POWER/RS232

Video Output Connector (2) RJ45

Control

Control Port (1) TO PC, (1) FIRMWARE

Control Connector (1) Type-B USB, (1) Micro USB

General

Video Resolution Up to 4Kx2K@60Hz 4:2:0

Transmission Mode HDBaseT

Transmission Distance

CAT5e/6:

4K@60Hz 4:2:0 ≤ 35 meters (115 feet),

1080p@60Hz ≤ 60 meters (197 feet)

CAT6a/7:

4K@60Hz 4:2:0 ≤ 40 meters (131 feet),

1080p@60Hz ≤ 70 meters (230 feet)

Bandwidth 10.2Gbps

HDMI Version 1.4

HDCP Version 1.4

Operation Temperature -5~ +55℃

Storage Temperature -25 ~ +70℃

Relative Humidity 10%-90%

Dimension (W*H*D) 105mm x 89mm x 44mm

Net Weight 242g

HDMI 4K HDBaseT Wallplate Kit

2.2 HDMI 4K HDBaseT Wallplate Receiver

Video

Video Input (1) HDBT IN/PoC

Video Input Connector (1) RJ45

Video Output (1) TO DISPLAY

Video Output Connector (1) 19-pin type-A female HDMI

Audio

Audio Input (1) MIC

Audio Input Connector (1) 3-pin terminal block

Audio Output (1) 2x20Watt@4Ω, (1) LINE OUT

Audio Output Connector (1) 4-pin terminal block, (1) 3-pin terminal block

Audio Format

HDMI embedded audio: PCM/Dolby/DTS

MIC input audio: PCM

Analog output audio: PCM

Control

Control (1) TCP/IP, (1) FROM TOUCHSCREEN, (1) IR OUT, (1) RS232,

(1) REMOTE MUTE

Control Connector (1) RJ45, (1) Type-A USB, (1) 3.5mm mini jack, (1) 3-pin terminal

block, (1) 2-pin terminal block

General

Video Resolution Up to 4Kx2K@60Hz 4:2:0

Transmission Mode HDBaseT

Transmission Distance

CAT5e/6:

4K@60Hz 4:2:0 ≤ 35 meters (115 feet),

1080p@60Hz ≤ 60 meters (197 feet)

CAT6a/7:

4K@60Hz 4:2:0 ≤ 40 meters (131 feet),

1080p@60Hz ≤ 70 meters (230 feet)

Bandwidth 10.2Gbps

HDMI Version 1.4

HDCP Version 1.4

Power Supply Input:100V~240V AC; Output: 24V DC 2.71A

Power Consumption 55W (Max)

Operation Temperature -5~ +55℃

Storage Temperature -25 ~ +70℃

HDMI 4K HDBaseT Wallplate Kit

Relative Humidity 10%-90%

Dimension (W*H*D) 250mm x 31mm x 130mm

Net Weight 682g

2.3 HDMI 4K HDBaseT Wallplate Control Panel

Port

Control (1) CONFIG, (1) POWER/RS232

Control Connector (1) Type-A USB, (1) RJ45

Other (1) Volume Knob, (4) Buttons (ON, OFF, HDMI 1, HDMI 2),

(1) Built-in IR sensor

Operation Temperature -5~ +55℃

Storage Temperature -25 ~ +70℃

Relative Humidity 10%-90%

Dimension (W*H*D) 114mm x70mm x 34mm

Net Weight 140g

HDMI 4K HDBaseT Wallplate Kit

3. Panel Description

3.1 HDMI 4K HDBaseT Wallplate Transmitter

①POWER LED: The LED illuminates red when power is applied.

②LINK LED: The LED illuminates green when there is a valid HDBaseT

connection with the receiver. The LED is off when there is no valid link.

③HDCP LED: The LED illuminates green when there is HDMI video traffic with

HDCP. It will blink green when there is HDMI video traffic without HDCP and

will be off when there is no HDMI video traffic.

④RESET: Press this button to reboot the transmitter.

⑤SOURCE SELECT: Blue-backlit button for source selection.

⑥TO PC: Type-B USB to connect Host PC to receive USB control signal from

receiver.

⑦HDMI IN 1 LED: The LED illuminates yellow when the source device is

connected to the HDMI input 1 port. It will turn green when the HDMI input 1

source is selected as input.

⑧HDMI IN 1: Type-A female HDMI input port to connect an HDMI source device.

PoC IN

HDBT OUT

PO WER

RS232

PoC IN

HDBT OUT

PO WER

RS232

LINK

RESET

HDMI IN 1

FIRMWARE

HDMI IN 2TO PC

SOURCE SELECT

Inhaltsverzeichnis

Andere AvLab Extender Handbücher

AvLab

AvLab AVLAB-US50 Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung