Avnet ZUBOARD 1CG Bedienungsanleitung

Page 1

trademarks of Avnet, Inc. All other brands are the property of their respective owners.

LIT# ZUBoard 1CG-GSG-v1-V0

ZUBoard 1CG Getting Started Guide

Version 1.0

Page 2

Document Control

Document Version: 1.

Document Date: 15 April 2023

Prior Version History

Version

Date

Comment

0.1

21 March 2023

Initial ZUBoard 1CG Getting Started Guide

1.0

15 April 2023

Initial Public Release

Page 3

Contents

Getting Started with ZUBoard 1CG....................................................................... 5

What’s Inside the Box? ......................................................................................... 5

Optional add-on items: ............................................................................................................. 5

What’s on the Web? ............................................................................................. 6

Official Documentation: ............................................................................................................ 6

Tutorials and Reference Designs: ............................................................................................ 6

Trainings and Videos:............................................................................................................... 6

Available through Avnet FAE: .................................................................................................. 6

ZUBoard 1CG Basic Setup and Operation ........................................................... 6

Example Design ....................................................................................................................... 7

Hardware Setup........................................................................................................................ 7

Boot FreeRTOS .................................................................................................... 8

Power off............................................................................................................. 11

Getting Help and Support ................................................................................... 11

Avnet Support ......................................................................................................................... 11

AMD Support .......................................................................................................................... 12

Installing and Licensing AMD Software............................................................... 13

Install Vivado™ ML Standard Edition..................................................................................... 13

Certification Disclaimer ....................................................................................... 13

Regulatory Compliance Information.................................................................... 14

Safety Warnings ................................................................................................. 14

Page 4

Figures

Figure 1 – ZUBoard 1CG ............................................................................................ 5

Figure 2 – ZUBoard 1CG USB-JTAG/UART Installed Correctly ................................. 7

Figure 3 – ZUBoard 1CG Switch Location .................................................................. 8

Figure 4 – ZUBoard 1CG Good Power LEDs.............................................................. 9

Figure 5 – COM Port Settings for USB-UART Terminal .............................................. 9

Figure 6 – FreeRTOS Boot on ZUBoard 1CG........................................................... 10

Figure 7 – FreeRTOS IP Address ............................................................................. 10

Figure 8 – Out of the Box example results on ZUBoard 1CG.................................... 11

Page 5

Getting Started with ZUBoard 1CG

The Avnet ZUBoard 1CG enables hardware and software developers to explore the capabilities

of the Zynq™ UltraScale+ ZU1. Designers can create or evaluate designs for both the Zynq

Processor Subsystem (PS) and the Programmable Logic (PL) fabric.

A ZUBoard 1CG image in its expected out-of-box configuration is shown below along with the

locations of several key components.

Figure 1 – ZUBoard 1CG

This Getting Started Guide will outline the steps to setup the ZUBoard 1CG hardware. It

documents the procedure to run a PetaLinux design running on the ARM® Cortex™-A9

MPCore™ Processing System (PS).

What’s Inside the Box?

•ZUBoard 1CG development board

•Quick Start Instruction card

Optional add-on items:

•High Speed Expansion Module

oDisplay Port, Dual Cam, M.2

•Ethernet Cable

•MikroE Click Board

Page 6

What’s on the Web?

ZUBoard 1CG is a development kit, with materials being made available through the Avnet

product page, element 14 and Hackster.io community websites.

•http://avnet.me/zuboard-1cg

•http://avnet.me/zuboard-blog

•Hackster.io - The community dedicated to learning hardware.

Official Documentation:

•Getting started guide

•Hardware user guide

•Schematics

•Bill of materials

•Mechanical drawing

•3D Model

•Board definition files for Vivado integration

•Programmable logic (PL) master user constraints

Tutorials and Reference Designs:

•Introduction to Zynq Design Tutorials

•PetaLinux BSP

•Introduction to Accelerated Edge AI

Trainings and Videos:

•Introduction to ZUBoard 1CG

•Technical Training Course

Available through Avnet FAE:

•Altium source database for schematic and layout

ZUBoard 1CG Basic Setup and Operation

The functionality of the ZUBoard 1CG is determined by the application booted from the non-

volatile memory – by default that is the QSPI. This Getting Started Guide allows system

developers to exercise and demonstrate multiple circuits through FreeRTOS, including:

•RGB LEDs (2)

•Slide Switch (4)

•Red LEDs (4)

•Pressure Sensor

•Temperature Sensor

In addition to the items included in the kit, you will also need the following to complete the

exercises in this tutorial.

Page 7

•External USB C 15V power supply 45W USB C cable (recommending Advantech

PSA-A45WM-U)

•Router or open Ethernet Port on host Windows PC

•micro-USB cable

•Ethernet cable

Example Design

The ZUBoard 1CG ships with an example FreeRTOS design stored in the QSPI. If the QSPI

has been erased or reprogrammed, then use the Restore QSPI Factory Images tutorial

available at Element 14 Avnet Boards Community to restore both the QSPI to the original

factory images.

Note: The factory test results are located in QSPI and can be exported from the out of box

example. Once the QSPI is erased or reprogrammed, this data is lost.

Hardware Setup

1. A terminal program is required. Tera Term was used in this example which can be

downloaded from the Tera Term project on the SourceForge page: ttssh2.sourceforge.jp

Install Tera Term or another terminal program of your choice to a host Windows PC.

2. When you Connect the ZUBoard 1CG micro-USB JTAG/UART port J16 to your host

Windows PC. It should automatically install the proper drivers, giving you a confirmation

as shown below. If installed correctly, skip to Step 6.

Figure 2 – ZUBoard 1CG USB-JTAG/UART Installed Correctly

3. In the rare circumstance that the drivers are not auto installed, then you must manually

install the driver for the FTDI FT2232H device. Visit the FTDI website and download the

appropriate driver for your operating system.

http://www.ftdichip.com/Drivers/VCP.htm

4. Make sure the ZUBoard 1CG is unplugged from the PC. Unzip and install the driver.

5. Reboot your PC then plug in the ZUBoard 1CG.

6. Ensure the BOOT MODE switch (SW2) is set to QSPI (On-OFF-ON-ON).

Page 8

Figure 3 – ZUBoard 1CG Switch Location

Boot FreeRTOS

7. If previously disconnected, plug in the micro-USB cable to the USB-JTAG/UART port.

8. Connect 15V USB C compliant power supply to USB C connector (J15) using USB C

cable. The Power LEDs will illuminate, but the board is not powered on.

•LED D22 (Green) VIN

•LED D16 (Orange) 5V Present

•LED D15 (Orange) 9V Present

•LED D14 (Orange) 15V Present

•LED D17 (Orange) EN SINK

Figure 4 – ZUBoard 1CG Good Power LEDs

Page 9

9. Once VIN is established press the Power Switch (SW7) to turn the board ON. The green

LED (D23) will illuminate to indicate Power Good.

Note: When the micro-USB is connected to the Host Windows PC an Orange LED (D24 –

JTAG/UART) will illuminate showing communication to the host PC.

10. Connect Ethernet cable to connector (J11). And then to either the host Windows PC or

Router attached to host Windows PC.

11. Launch the Tera Term Application, open SETUP menu, select SERIAL PORT, select Port

assigned to ZUBoard 1CG (typically the largest number) and ensure the other settings

match shown below. Press the RESET button (SW6) to reset the board so you can see

the boot sequence.

Figure 5 – COM Port Settings for USB-UART Terminal

Page 10

Figure 6 – FreeRTOS Boot on ZUBoard 1CG

When ZUBoard 1CG connects with the network it will obtain an IP address and report it in the

Tera Term window as below.

Figure 7 – FreeRTOS IP Address

Inhaltsverzeichnis

Andere Avnet Einplatinencomputer Handbücher

Avnet

Avnet MaaXBoard AES-MC-SBC-IMX8M-G Gebrauchsanweisung

Avnet

Avnet MaaXBoard Nano Bedienungsanleitung

Avnet

Avnet Ultra96-V1 Installationshandbuch

Avnet

Avnet MaaXBoard AES-MC-SBC-IMX8M-G Bedienungsanleitung

Avnet

Avnet Reach Further Ultra96-V2 Bedienungsanleitung

Avnet

Avnet MaaXBoard Mini Bedienungsanleitung

Avnet

Avnet MAAXBOARD Bedienungsanleitung

Avnet

Avnet MAAXBOARD Bedienungsanleitung

Avnet

Avnet MAAXBOARD Bedienungsanleitung

Avnet

Avnet MaaXBoard Mini Bedienungsanleitung

Avnet

Avnet MaaXBoard Mini Gebrauchsanweisung

Avnet

Avnet SMARC MSC SM2S-IMX8M Bedienungsanleitung

Beliebte Einplatinencomputer Handbücher anderer Marken

WIN Enterprises

WIN Enterprises PL-80910 Bedienungsanleitung

AXIOMTEK

AXIOMTEK SBC81206 Series Bedienungsanleitung

Embest

Embest SOM-PH8800 Bedienungsanleitung

SeaLevel

SeaLevel SBC-R9 Bedienungsanleitung

SMART Embedded Computing

SMART Embedded Computing ATCA-8310 Bedienungsanleitung

WinSystems

WinSystems PPM-LX800-G Bedienungsanleitung

GIGAIPC

GIGAIPC QBiX-PPC Series Bedienungsanleitung

OLIMEX

OLIMEX A10S-OLinuXino-MICRO Bedienungsanleitung

Commell

Commell FS-978 Bedienungsanleitung

GIGAIPC

GIGAIPC QBiP-8665A/ Bedienungsanleitung

VersaLogic

VersaLogic Python EBX-11 Bedienungsanleitung

Micro Computer Specialists

Micro Computer Specialists IRV-3702 Bedienungsanleitung

CompuLab

CompuLab SB-A510 Bedienungsanleitung

Boser

Boser HS-7321 Bedienungsanleitung

Premier Farnell

Premier Farnell Embest SBC8530 Bedienungsanleitung

MicroSys Electronics

MicroSys Electronics miriac SBC-LS1043A2 Bedienungsanleitung

Aaeon

Aaeon UP Bedienungsanleitung

Portwell

Portwell WUX Series Bedienungsanleitung