Avocent DSR 1024 Bedienungsanleitung

The following instructions will help you

to connect your DSR switch.

Should you require further assistance, please

consult your installer/user guide.

Avocent, the Avocent logo, The Power of Being There, DSView and DSR are registered trademarks of Avocent Corporation. All other marks are the property of their respective owners. ©2004 Avocent Corporation. All rights reserved. 590-441-501A

Local

Connection

Server

Connect the

server to the

DSRIQ module.

Connect a DSRIQ

module to the

DSR switch.

Power

Transformer

The Power of Being There

To connect a DSR switch

Plug in the keyboard,

monitor and mouse for

your local connection.

Power down the

target server and

attach the power cord

to the DSR switch.

Quick Installation Guide

DSR®

1024 Switch

Connecting power to the

DSR switch

Power down the target server that will be part of

your DSR switching system. Locate the power

transformer and cord that came with your DSR switch.

Plug the 4-pin connector into the rear of the DSR

switch. Plug one end of an AC power cord into the

transformer box and the other end into an appropriate

AC wall outlet.

Connecting the local port

Plug a VGA monitor and the PS/2 keyboard and mouse

cables into the appropriately labeled DSR ports.

Connecting a DSRIQ module to the

DSR switch

Plug one end of a CAT 5 cable (4-pair, up to 10 meters)

into the DSRIQ port and plug the other end into the

RJ-45 connector of a DSRIQ module.

Connecting the server to the

DSRIQ module

Plug the DSRIQ module into the appropriate ports on

the back of the target server.

(Continued on reverse side)

DSR1024 Switch

The following instructions will help you

to connect your DSR switch.

Should you require further assistance, please

consult your installer/user guide.

Connecting the network

Plug a CAT 5 cable from your Ethernet network into

the LAN port on the back of your DSR switch. Network

users will access the DSR switch through this port.

Connecting an external modem

(optional)

The DSR switch may also be accessed using an ITU

V.92, V.90 or V.34-compatible modem. Plug one end

of the included RJ-45 serial cable into the MODEM

port on the back of your DSR switch. Plug the other

end into the RJ-45 to DB-9 (male) adaptor, which

then plugs into the modem.

NOTE: Using a modem connection instead of a

LAN connection will limit the performance

capability of your DSR switch.

SPC Power

Control Device

Server

Modem

DSView®

Server

Software

Connect the switch

to the network.

Connect the

target server and

DSR1024

switch to the

SPC device.

The Power of Being There

To connect a DSR switch

(continued from reverse side)

Quick Installation Guide

DSR®

1024 Switch

Plug in the

external modem.

Telephone

network

Ethernet

Connecting the SPC power control

device (optional)

Plug one end of the cable supplied with the SPC power

control device into the SPC port on the DSR switch

and plug the other end into the SPC RJ-45 port. Plug

the power cord from the target server into an SPC

power outlet. Plug the SPC device into an appropriate

AC wall outlet.

Powering target and switch

Power up the target server and then power up the

DSR switch.

For additional information

For further instructions on DSR switch connection,

software setup and security configuration, please refer

to the installer/user guide included with the switch.

Check http://register.avocent.com for the latest DSR

software and firmware updates.

DSR1024 Switch

Andere Handbücher für DSR 1024

Andere Avocent Schalten Handbücher

Avocent

Avocent DSR Series DSR1020 Bedienungsanleitung

Avocent

Avocent SwitchView®SC440 Installationsanleitung

Avocent

Avocent DSR Series DSR1020 Bedienungsanleitung

Avocent

Avocent AutoView 3100 Bedienungsanleitung

Avocent

Avocent AMX5111 Bedienungsanleitung

Avocent

Avocent SwitchView IP 1020 Bedienungsanleitung

Avocent

Avocent SwitchView Bedienungsanleitung

Avocent

Avocent AutoView 1400 Bedienungsanleitung

Avocent

Avocent DSR DSR800 Montage- und Wartungsanleitung

Avocent

Avocent AMX 5130 Bedienungsanleitung

Avocent

Avocent SwitchView SC4 DVI Bedienungsanleitung

Avocent

Avocent AutoView 1400 Bedienungsanleitung

Avocent

Avocent SwitchView SC200 Series Bedienungsanleitung

Avocent

Avocent DSR Series DSR1010 Bedienungsanleitung

Avocent

Avocent DSR Series DSR4030 Bedienungsanleitung

Avocent

Avocent PS/2 IP Bedienungsanleitung

Avocent

Avocent DSR Series DSR4160 Bedienungsanleitung

Avocent

Avocent PS/2 KVM Bedienungsanleitung

Avocent

Avocent DSR Series DSR1021 Bedienungsanleitung

Avocent

Avocent AutoView 2030 Bedienungsanleitung

Avocent

Avocent DSR 1024 Montage- und Wartungsanleitung

Avocent

Avocent MPU1016-001 Montage- und Wartungsanleitung

Avocent

Avocent switchview 100 Bedienungsanleitung

Avocent

Avocent DSR Series DSR2035 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung