Award IB945 Bedienungsanleitung
IB945
LGA775 Core2 Duo
Intel®Q45 Chipset
Full Size CPU Card
USER’S MANUAL
Version 1.0
ii
IB945 User’s Manual
Acknowledgments
Award is a registered trademark of Award Software International,
Inc.
PS/2 is a trademark of International Business Machines
Corporation.
Intel and Core 2 Duo are registered trademarks of Intel
Corporation.
Microsoft Windows is a registered trademark of Microsoft
Corporation.
Winbond is a registered trademark of Winbond Electronics
Corporation.
All other product names or trademarks are properties of their
respective owners.
IB945 User’s Manual iii
Table of Contents
Introduction.......................................................1
Installations.......................................................3
BIOS Setup.......................................................19
Drivers Installation......................................41
Intel Chipset Software Installation Utility.........................42
Intel Graphics Driver Installation......................................44
Realtek HD Code Audio Driver Installation.....................46
LAN Drivers Installation...................................................47
Appendix...........................................................49
A. I/O Port Address Map...................................................49
B. Interrupt Request Lines (IRQ)......................................50
C. Watchdog Timer Configuration....................................51
D. Digital I/O Sample Code..............................................55
iv
IB945 User’s Manual
ATTENTION:
It is strongly recommended that only heatsink that have corresponding
(metal) backplate be used on the CPU card. This is to avoid the CPU
card being bent/distorted, causing the CPU card to become damaged. A
reference picture of a backplate and heatsink that has backplate are
shown below.
INTRODUCTION
IB945 User’s Manual 1
Introduction
Specifications
Model Name IB945 (Full Size CPU Card)
CPU Type
Support Intel® Core™2 Extreme processor QX9000 series
Intel® Core™2 Quad processor Q9000 series,
Intel® Core™2 Duo processor E8000 and E7000 series
Intel® Pentium® Dual Core, Intel® Celeron® Dual Core
CPU Speed Up to 3.0 GHz
CPU FSB 800/1066/1333MHz FSB
Green /APM APM1.2
BIOS Award BIOS, support ACPI Function
CPU Socket LGA775
Chipset Intel Eaglelake:Q45 + ICH10DO Chipset
Q45 GMCH: AC82Q45, 34mm x 34mm, 1254-pin FC-BGA
ICH10DO: AF82801JDO, 31mm x 31mm, 676-pin mBGA
Memory DDRIII 800/1066MHz
DIMM x 4 (w/o ECC), Max. 8GB
VGA Intel Q45 GMCH integrated graphics device (GMA4500)
Supports Direct X10 (Vista) & OpenGL 2.1
DVI Chrontel CH7307C x1 for DVI
LVDS N/A
LAN 1. ICH10DO Gigabit MAC + Intel Gigabit PHY: Intel 82567 x1
2. Intel 82574L PCI-e Gigabit LAN controller x1
USB ICH10DO built-in USB 2.0 host controller, support 12 ports
Serial ATA Ports ICH10DO built-in SATA controller, supports 6 ports
Parallel IDE JMicron JM368 (PCI-e to PATA) x1 for 1 PATA channel
PCI-to-ISA bridge ITE IT8888G x1 for high drive ISA bus
Audio Intel ICH10DO built-in high definition audio w/ Realtek ALC888
Codec supports 5.1 CH audio (line-out, line-in & mic)
LPC I/O Winbond 83627DHG
COM1(RS232),COM2(RS232/422/485), IrDAx1, Parallel x 1,
Floppy x 1; Hardware monitor (3 thermal inputs, 4 voltage monitor
inputs, VID0-4 & 2 Fan Headers)
Digital IO 4 in & 4 out
Keyboard/Mouse Supports PS/2 Keyboard/Mouse Connector
Expansion Slots Mini PCI-express socket x1
Edge Connector PS/2 Connector x1 for keyboard/mouse
DB15 x1 for VGA, RJ45 x2 for LAN 1, 2
On Board
Header/Connector Standard SATA (7-pin shrouded vertical) connector x4
40-pin, 0.1” pitch, standard box-header x1 for IDE
DF13-20 header x2 for LVDS, DF11-20 header x1 for DVI
34-pin box-header x1 for FDD, DF11 box-header x1 for printer
DF11 10x2 box-header x2 for COM1-2
4-pin header x1 for CPU fan (PWM smart fan)
3-pin header x1 for system fan
4x2 header x3 for USB1-6, IrDA
SATA connector x 6 ports, RAID function (0,1,10,5)
Watchdog Timer Yes (256 segments, 0, 1, 2…255 sec/min)
System Voltage +5V, +3.3V, +12V, -12V & 5VSB
Board Size 338mm x 122mm
INTRODUCTION
2
IB945 User’s Manual
Checklist
Your IB945 Core 2 Duo CPU Card package should include the items
listed below:
The IB945 Card
This User’s manual
1 x IDE cable
1 x Floppy cable
1 x SATA cable
1 x TMDS cable
2 Serial Port Ribbon Cable and 1 Parallel Port Attached to a
Mounting Bracket
1 Y-Cable supporting a PS/2 Keyboard and a PS/2 Mouse
Audio cable with bracket (Audio-18K)
USB cable with bracket (USB2K-4)
1 CD containing the following:
Chipset Drivers
Flash Memory Utility
Optional SATA Power Cord (PW34)
Board Dimensions
INSTALLATIONS
IB945 User’s Manual 3
Installations
This section provides information on how to use the jumpers and
connectors on the IB945 in order to set up a workable system. The topics
covered are:
Installing the CPU ................................................................................. 4
Installing the Memory ........................................................................... 5
Setting the Jumpers................................................................................ 6
Connectors on IB945........................................................................... 10
INSTALLATIONS
4
IB945 User’s Manual
Installing the CPU
The IB945 CPU Card supports an LGA 775 processor socket for Intel®
Core 2 Duo processors.
The LGA 775 processor socket comes with a lever to secure the
processor. Refer to the pictures below, from left to right, on how to place
the processor into the CPU socket. Please note that the cover of the
LGA775 socket must always be installed during transport to avoid
damage to the socket.
IMPORTANT: Ensure that the power supply is OFF during CPU and
memory module installation.
INSTALLATIONS
IB945 User’s Manual 5
Installing the Memory
The IB945 CPU Card supports four DDR3 memory sockets for a
maximum total memory of 8GB. It supports DDRIII 800/1066.
Installing and Removing Memory Modules
To install the DDR3 modules, locate the memory slot on the board and
perform the following steps:
1. Hold the DDR3 module so that the key of the DDR3 module align
with that on the memory slot.
2. Gently push the DDR3 module in an upright position until the clips of
the slot close to hold the DDR3 module in place when the DDR
module touches the bottom of the slot.
3. To remove the DDR3 module, press the clips with both hands.
DDR2 Module
Lock Lock
Lock Lock
IMPORTANT: Ensure that the power supply is OFF during CPU and
memory module installation.
INSTALLATIONS
6
IB945 User’s Manual
Setting the Jumpers
Jumpers are used on IB945 to select various settings and features
according to your needs and applications. Contact your supplier if you
have doubts about the best configuration for your needs. The following
lists the connectors on IB945 and their respective functions.
Jumper Locations on IB945...................................................................7
JP1/JP2 COM2/COM1 RS232 +5V/+12V Power Setting.....................8
JP3: RS232/422/485 (COM2) Selection................................................8
J4: Power Supply Type Select...............................................................9
JP6: Clear CMOS Contents ...................................................................9
Inhaltsverzeichnis
Andere Award Computerhardware Handbücher
Beliebte Computerhardware Handbücher anderer Marken
EMC2
EMC2 VNX Series Betriebsanleitung
Panasonic
Panasonic DV0PM20105 Bedienungsanleitung
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung
Gigabyte
Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung
Raidon
Raidon iT2300 Bedienungsanleitung
National Instruments
National Instruments PXI-8186 Bedienungsanleitung
