Award IB780 Bedienungsanleitung
IB780
Full-Size Socket 370
VIA Apollo PLE133 CPU Card
USER’S MANUAL
Version 1.0
ii IB780 User’s Manual
Acknowledgments
Award is a registered trademark of Award Software International,
Inc.
PS/2 is a trademark of International Business Machines
Corporation.
Intel and Celeron are registered trademarks of Intel Corporation.
Microsoft Windows is a registered trademark of Microsoft
Corporation.
Winbond is a registered trademark of Winbond Electronics
Corporation.
All other product names or trademarks are properties of their
respective owners.
IB780 User’s Manual iii
Table of Contents
Introduction.....................................................................1
Product Description........................................................1
Checklist........................................................................2
Specifications .................................................................3
Board Dimensions ..........................................................4
Installations.....................................................................5
Installing the CPU ..........................................................6
MicroPCI Daughter Card Installation...............................7
Installing the Memory (DIMM).......................................8
Setting the Jumpers.........................................................9
Connectors on IB780 ....................................................13
BIOS Setup.....................................................................25
Drivers Installation.......................................................45
Appendix ........................................................................59
A. I/O Port Address Map..............................................59
B. Interrupt Request Lines (IRQ)...................................59
iv IB780 User’s Manual
This page was intentionally left blank.
INTRODUCTION
IB780 User’s Manual 1
Introduction
Product Description
IB780 is a high-performance flexible CPU card based on the VIA Apollo
PLE 133T chipset. The VIA Apollo PLE 133T chipset is based on an
innovative and scaleable architecture with proven reliability. It is a two-
chip set consisting of the VT8601T North Bridge Controller and
VT82C686B South Bridge Controller.
IB780 supports 66/100/133MHz system bus, up 1.2GHz CPU speed, the
VT8601T integrated graphics accelerator. Additional key features
include support for four USB ports, AC-97 link for audio, hardware
monitoring, and power management.
System memory is provided by three 168-pin DIMM sockets that
accommodate SDRAM with a maximum capacity of 1.5GB. The Award
BIOS facilitates easy system configuration and peripheral setup.
Expansion functionality is provided with MicroPCI socket that supports
MicroPCI daughter cards for Ethernet (LAN), SCSI, and IEEE 1394
functions.
Other advanced features include DiskOnChip flash disk support, 16-
level watchdog timer, and IrDA interface.
DiskOnChip flash disks are storage devices that has no moving parts and
emulates FDD/HDD with Flash/RAM/ROM offering reliable
data/program storage and long life span. They are reliable and suitable
for industrial or other harsh environments characterized by motion,
shock, vibration, adverse temperature, dust and humidity. Other features
include faster data access, longer MTBF, lower power consumption, cost
effective for small capacity and small form factor.
INTRODUCTION
2IB780 User’s Manual
Checklist
Your IB780 package should include the items listed below.
•
The IB780 Industrial CPU Card
•
This User’s Manual
•
1 IDE Ribbon Cable
•
1 Floppy Ribbon Connector
•
2 Serial Port Ribbon Cable and 1 Parallel Port Attached to a
Mounting Bracket
•
1 Y-Cable supporting a PS/2 Keyboard and a PS/2 Mouse
•
1 CD containing the following:
•
Chipset Drivers
•
Flash Memory Utility
INTRODUCTION
IB780 User’s Manual 3
Specifications
Processor
Supported Socket 370 supports Intel Pentium III / Celeron
533MHz~1.2GHz, 66/100/133MHz Front Side Bus
Chipset VIA Apollo PLE133 Chipset
North bridge: VT8601T (552-pin BGA package)
South bridge: VT82C686B (352-pin BGA package)
BIOS Award BIOS
Supports ACPI, DMI, PnP
System Memory 3x DIMM sockets support up to 1.5GB capacity
PC100/PC133supported
I/O Chipset VT82C686B chipset
Keyboard controller built-in
I/O Features 1x FDD (up to 2.88MB, 3 Mode, LS120)
1x Parallel Port (EPP, ECP Port)
2x Serial Ports (1x RS232 and 1x RS232/422/485)
1x IrDA TX/RX Headers
Bus Master IDE 2x IDE interfaces for up to 4 devices; supports PIO Mode
3/4 or UDMA/33/66/100 HDD, and ATAPI CD-ROM
VGA VT8601T integrated graphics controller
Shared main memory; max. 8MB
Audio VT82C686B chipset built-in sound controller
With AC97 Codec
VT1611A (Line-out, Line-in, Mic)
LAN Realtek RTL8139C Ethernet controller
10Base-T / 100Base-TX protocol
Optional Dual Ethernet solution via MicroPCI socket
USB 4 ports (pin header)
Watchdog Timer 16 levels (0, 2, 4, 6, …30 sec.)
Hardware
Monitoring Built-in VT82C686B chipset
Monitors CPU/system temperature and voltages
DiskOnChip Support M-Systems 2MB~288MB DiskOnChip flash disk
MicroPCI Socket OneMicroPCI socketsupports MicroPCIdaughter cards
with VGA, Ethernet, SCSI and IEEE 1394 functions
Other Features ISAhighdrive
PICMG compliance
Wake on LAN
Form Factor Full Size CPU card
Dimensions 338mm x 122mm (13.3”x 4.8”)
INTRODUCTION
4IB780 User’s Manual
Board Dimensions
INSTALLATION
IB780 User’s Manual 5
Installations
This section provides information on how to use the jumpers and
connectors on the IB780 in order to set up a workable system. The topics
covered are:
Installing the CPU ..........................................................6
MicroPCI Daughter Card Installation...............................7
Installing the Memory (DIMM).......................................8
Setting the Jumpers.........................................................9
Connectors on IB780 ....................................................13
INSTALLATIONS
6IB780 User’s Manual
Installing the CPU
The IB780 CPU Card supports a Socket 370 processor socket for Intel
Pentium III and Celeron processors.
The Socket 370 processor socket comes with a lever to secure the
processor. Raise this lever to about a 90°angle to allow the insertion of
the processor. Place the processor into the socket by making sure the
notch on the corner of the CPU corresponds with the notch on the inside
of the socket. Once the processor has slide into the socket, return the
lever to the lock position. Refer to the figures below.
After you have installed the processor into the socket, check if the
jumpers for the CPU type and speed are correct.
NOTE:Ensure that the CPU heat sink and the CPU top surface are in
total contact to avoid CPU overheating problem that would
cause your system to hang or be unstable.
Inhaltsverzeichnis
Andere Award Hauptplatine Handbücher
Award
Award PCM-9361 Bedienungsanleitung
Award
Award MB8100 Bedienungsanleitung
Award
Award MI812 Bedienungsanleitung
Award
Award IB882 Bedienungsanleitung
Award
Award NLX BX4 Bedienungsanleitung
Award
Award 5AX Bedienungsanleitung
Award
Award MI800 Bedienungsanleitung
Award
Award MB899X Bedienungsanleitung
Award
Award MI945X Bedienungsanleitung
Award
Award ECX800 Bedienungsanleitung
Beliebte Hauptplatine Handbücher anderer Marken
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Bedienungsanleitung
Gigabyte
Gigabyte GA-9IVDT Bedienungsanleitung
Texas Instruments
Texas Instruments ADS8372EVM Bedienungsanleitung
Commell
Commell MS-C73 Bedienungsanleitung
IBT Technologies
IBT Technologies MB860 Bedienungsanleitung
Nvidia
Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung
