Configuring your camera
Option 1: Scan the QR code on your product:
1. Tap on Add in the My Cameras QR code
2. Use the device screen to scan the QR code sticker on your
CamLIGHT product or on the back of this guide.
3. As soon as the QR code is identified, the product’s ID
number is automatically placed in the ID field Next
4. Enter a name for your camera and tap Next
Option 2: Enter the product ID manually:
1. Alternatively, you may tap on ID
2. Enter the ID number manually and tap Done.
3. Enter a name for your camera and tap Next
Adding your camera to your home WiFi network
1. Tap Scan QR code Choose the WiFi network for your
camera Enter the network password Next
2. Press the button on your CamLIGHT for 10 seconds. The light
will turn off and a small LED will blink red.
3. Follow the instructions on your device’s screen until a QR
code is displayed.
4. Hold your device’s screen in front of the CamLIGHT camera,
at a distance of 6 –12 inches (15 –30 cm). You will hear an
audio message confirming when CamLIGHT recognizes the
QR code and connects directly to your WiFi network (you
may need to activate WiFi pairing on your router).
5. Tap on Next. When you see your camera’s details on the
screen, tap on Submit.
