Axiom DEMO9S08LL16 Bedienungsanleitung

DEMO9S08LL16 DOC-0428-020

QUICK START GUIDE REV 1.1 09/2008

Email: www.axman.com

Support: [email protected]

DEMO9S08LL16 QUICK START GUIDE

Introduction and Default Settings

This quick start guide will show how to connect the target board to a host PC, install the correct version of Code-

Warrior Development Studio, and execute a simple demonstration program loaded in FLASH memory. The de-

fault jumper settings for the DEMO9S08SE8 are shown below

Figure 1: DEMO9S08LL16 Default Settings

Install CodeWarrior Development Studio for or Microcontrollers, Special Edition

The DEMO9S08LL16 board ships with CodeWarrior Development Studio for Microcontrollers, a complete Inte-

grated Development Environment (IDE) that provides a highly visual and automated framework to accelerate the

development of the most complex embedded applications. To install the IDE, refer to the “CodeWarrior Devel-

opment Studio” DVD case and follow the steps in the included Quick Start Guide.

CodeWarrior Development Studios for Microcontrollers must be properly installed before attempting to connect

the target board to the host PC. Otherwise, the necessary USB drivers will not be available and the host PC will

not recognize the board.

Run the demo program

The DEMO9S08LL16 ships with an LCD demonstration program loaded into on-chip FLASH memory. The demo

application illuminates all LCD elements and displays a scrolling marquee with the board name. The demo appli-

cation then displays a timer with HH:MM:SS format. The timer will count as long as power is applied.

1. Verify the configuration jumpers are set to the default position. Refer to Figure 1 above.

2. Connect the included USB cable to an open USB port on the host PC and to the USB connector on the target

board.

V_SEL

DEMO9S08LL16 DOC-0428-020

QUICK START GUIDE REV 1.1 09/2008

3. Follow the on-screen instructions to install the necessary USB drivers.

4. After the USB drivers are properly installed, the USB, VDD, and LED1 – LED8 will be ON.

5. A scrolling marquee showing the board name will display on the LCD followed by a timer in HH:MM:SS format

6. Press SW2 to start the ACCEL demo. Follow prompts on the LCD to execute the ACCEL Demo.

Troubleshooting

If the target BDM fails to connect:

1. Ensure option jumpers are in default position and securely seated, refer to Figure 1 above

2. Ensure the correct version of CodeWarrior is installed with all available updates

3. Ensure the USB cable is securely connected to both the host PC and the target board

If the Accel Demo fail to execute properly

1. Remove and replace the VDD_EN jumper then try again

2. Apply power to the PWR jack

If the above Troubleshooting tips fail to correct the problem, please contact Freescale Semiconductors for further

assistance. Refer to the included in the kit for contact information. Assistance may also be found by contacting

Axiom Manufacturing directly at [email protected].

Inhaltsverzeichnis

Andere Axiom Sprecher Handbücher

Axiom

Axiom FMS QS Bedienungsanleitung

Axiom

Axiom M60 Bedienungsanleitung

Axiom

Axiom AX2010P Bedienungsanleitung

Axiom

Axiom ED23PMKII Bedienungsanleitung

Axiom

Axiom CX15A Bedienungsanleitung

Axiom

Axiom Architectural Series W22 Technisches Datenblatt

Axiom

Axiom M3 Bedienungsanleitung

Axiom

Axiom VP180 v3 Bedienungsanleitung

Axiom

Axiom Millennia M2 Technisches Handbuch

Axiom

Axiom T2 Bedienungsanleitung

Axiom

Axiom Quadpolar QS4 v2 Bedienungsanleitung

Axiom

Axiom VP160 Bedienungsanleitung

Axiom

Axiom AX16CL Bedienungsanleitung

Axiom

Axiom AX2065P Bedienungsanleitung

Axiom

Axiom AX2065AV2 Bedienungsanleitung

Axiom

Axiom VP100 v3 Bedienungsanleitung

Axiom

Axiom Axiom VP150 Bedienungsanleitung

Axiom

Axiom ED120A Bedienungsanleitung

Axiom

Axiom VP100 Bedienungsanleitung

Axiom

Axiom Millennia M60 Bedienungsanleitung

Axiom

Axiom T80 Bedienungsanleitung

Axiom

Axiom ED150A Bedienungsanleitung

Axiom

Axiom CX15AV2 Bedienungsanleitung

Axiom

Axiom VP100 v2 Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung