AXIOMTEK P2127-810 Bedienungsanleitung

P2127-810

All-in-One 12.1” TFT

PANEL PC with

Versatile Stand Design

User’s Manual

Disclaimers

The information in this manual has been carefully checked and is believed to be

accurate. AXIOMTEK Co., Ltd. assumes no responsibility for any infringements of

patents or other rights of third parties which may result from its use.

AXIOMTEK assumes no responsibility for any inaccuracies that may be contained in

this document. AXIOMTEK makes no commitment to update or to keep current the

information contained in this manual.

AXIOMTEK reserves the right to make improvements to this document and/or

product at any time and without notice.

No part of this document may be reproduced, stored in a retrieval system, or

transmitted, in any form or by any means, electronic, mechanical, photocopying,

recording, or otherwise, without the prior written permission of AXIOMTEK Co.,

Ltd.

October 2005, Version A1

Printed in Taiwan

iii

Safety Approvals

CEMarking

FCCClassA

FCC Compliance

This equipment has been tested and complies with the limits for a

Class A digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. If not installed and used in

accordance with proper instructions, this equipment might generate or

radiate radio frequency energy and cause harmful interference to

radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following measurers:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and

receiver.

3. Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

4. Consult the dealer or an experienced radio/TV

technician for help.

Shielded interface cables must be used in order to comply with

emission limits.

Safety Precautions

Before getting started, read the following important cautions.

1. The P2127-810 does not come equipped with an

operating system. An operating system must be loaded

first before installing any software into the computer.

2. Be sure to ground yourself to prevent static charge when

installing the internal components. Use a grounding wrist

strap and place all electronic components in any

static-shielded devices. Most electronic components are

sensitive to static electrical charge.

3. Disconnect the power cord from the P2127-810 before

making any installation. Be sure both the system and the

external devices are turned OFF. Sudden surge of power

could ruin sensitive components. Make sure the

P2127-810 is properly grounded.

4. The brightness of the flat panel display decreases with

usage. However, hours of use vary depending on the

application environment.

5. Turn OFF the system power before cleaning. Clean the

system using a cloth only. Do not spray any liquid cleaner

directly onto the screen. The P2127-810 may come with

or w/o a touchscreen. Although the touchscreen is

chemical resistant, it is recommended that you spray the

liquid cleaner on a cloth first before wiping the screen. In

case your system comes without the touchscreen, you

must follow the same procedure and not spray any

cleaner on the flat panel directly.

6. Avoid using sharp objects to operate the touchscreen.

Scratches on the touchscreen may cause malfunction or

internal failure to the touchscreen.

7. The flat panel display is not susceptible to shock or

vibration. When assembling the P2127-810, make sure it is

securely installed.

8. Do not open the system’s back cover. If opening the

cover for maintenance is a must, only a trained

technician is allowed to do so. Integrated circuits on

computer boards are sensitive to static electricity. To

avoid damaging chips from electrostatic discharge,

observe the following precautions:

9Before handling a board or integrated circuit, touch an

unpainted portion of the system unit chassis for a few

seconds. This will help to discharge any static electricity on

your body.

9When handling boards and components, wear a

wrist-grounding strap, available from most electronic

component stores.

Trademarks Acknowledgments

AXIOMTEK is a trademark of AXIOMTEK Co., Ltd.

ALi is a trademark of Acer Laboratories, Inc.

AMD is a trademark of Advanced Micro Devices, Inc.

AMI is a trademark of American Megatrends, Inc.

Cyrix is a trademark of Cyrix Corporation.

IBM, PC/AT, PS/2, VGA are trademarks of International

Business Machines Corporation.

Intel and Pentium are trademarks of Intel Corporation.

MS-DOS, Microsoft C and QuickBASIC are trademarks of

Microsoft Corporation.

SMC is a trademark of Standard Microsystems

Corporation.

C&T is a trademark of Chips and Technologies, Inc.

SST is a trademark of Silicon Storage Technology, Inc.

UMC is a trademark of United Microelectronics

Corporation.

Other brand names and trademarks are the properties of

their respective owners.

This page does not contain any information.

Table of Contents vii

Table of Contents

Chapter 1 Introduction-------------------------1

1.1 General Description ..........................................1

1.2 Specifications ...................................................2

1.2.1 Core System for P2127-810 system with SBC83810 2

1.2.2 I/O System................................................................2

1.2.3 Built-in Peripherals ...................................................3

1.2.4 System Specification...............................................3

1.3 Dimensions .......................................................5

1.4 I/O Outlets .........................................................6

1.5 Utilities Supported ............................................8

Chapter 2 System Configuration -----------9

2.1 Pedestal Versatility ...........................................9

2.1.1 Desktop Standing....................................................9

2.1.2 Vertical Wall Mounting..........................................10

2.1.3 30°Wall Mounting .................................................11

2.1.4 30oTable Standing................................................13

2.1.5 60°Table Standing ................................................14

Chapter 3 Hardware Installation ------ 15

3.1 CPU .................................................................16

3.2 DRAM...............................................................17

3.3 HDD .................................................................17

3.4 3 x Serial Ports................................................19

3.5 Parallel Port ....................................................20

3.6 VGA .................................................................20

3.7 Ethernet...........................................................20

3.8 Keyboard.........................................................21

3.9 Expansion Slot................................................21

3.10 External FDD, Keyboard and Mouse Installation

........................................................................22

3.11 System O/S and Software Installation ............23

Appendix A Power Supply Specifications25

Specifications...........................................................25

International Standards............................................26

viii

This page does not contain any information.

P2127-810 PANEL PC User’s Manual

Introduction 1

C h a p t e r 1

Introduction

This chapter contains the general information and detailed

specifications of P2127-810. Chapter 1 includes the following

sections:

General Description System Specification

Dimensions I/O Outlets

Utilities Supported

1.1 General Description

The P2127-810 super slim industrial panel PCs are mainly designed

for industrial automation and some space-constricted embedded

applications. For some space-concerned industries, a traditional PC

with a separate main system, display monitor and keyboard is simply

not integrated enough.

Ruggedly designed, the P2127-810 is 100% IBM PC/AT compatible

and it integrates super I/Os, 12.1” TFT touchscreen, Ethernet, and

packs special industrial features like watchdog timer all in a single

system. The full PC functionality coupled with its industrial-grade

construction easily tailors the system for any embedded applications

-- allowing the system to endure continuous operation in any hostile

industrial environments where stability and reliability is a must.

The P2127-810 feature a versatile stand suited for a wide variety of

applications. With the pedestal kit assembled to the main unit, both

can transform into different positions such as desktop free standing,

30°table standing, panel mount and 30°wall mounting. Its cable

management device also trims the operation environment. The NEMA

4/12 water/dust-proof front panel is specially designed for the

continuous operation in outdoor environments. Common applications

of these PANEL PCs include POS, POI terminals, KIOSK, LAN,

Hospitality, Banking, Video Conferencing, Medical instrumentation,

Industrial and Office Automation - to name just a few.

P2127-810 PANEL PC User’s Manual

Introduction

virtually the ultimate one-step solution for your space-limited

applications.

1.2 Specifications

1.2.1 Core System for P2127-810 system with

SBC83810

CPU: Intel Pentium M and Celeron M (Socket 479) FSB

400MHz

System Chipset: Intel 855GME/852GM + 6300ESB

BIOS: Phoenix-Award BIOS, Y2K compliant

4Mbit Flash ROM, DMI, Plug and Play

System Memory: One 184-pin DDR DIMM Socket

Maximum of 1GB DDR Memory

200/266/333MHz ECC/non-ECC DDR

supported

L2 Cache: Integrated in CPU

Bus Clock: 400 MHz

Watchdog Timer: Interate Intel 6300ESB

Up to 1024 levels as Reset/SMI features

1.2.2 I/O System

Standard I/O:

−3 x serial ports with

power; 2 x RS-232, 1 x

RS-232/422/485 jumper

selectable

−1 x parallel port,

SPP/EPP/ECP

−1 x External FDD

Interface

−1 x Keyboard Interface

−1 x PS/2 Mouse Interface

−1 x External IDE Interface

−4 x USB Ports

−1 x VGA Port

−1 x RJ45 Port

−1 x Audio in/out, MIC

Inhaltsverzeichnis

Andere AXIOMTEK Industrie-PC Handbücher

AXIOMTEK

AXIOMTEK eBOX627-312-FL Bedienungsanleitung

AXIOMTEK

AXIOMTEK TBOX313-835-FL Series Bedienungsanleitung

AXIOMTEK

AXIOMTEK eBOX560-512-FL Bedienungsanleitung

AXIOMTEK

AXIOMTEK eBOX100-51R-FL Series Bedienungsanleitung

AXIOMTEK

AXIOMTEK tBOX322-882-FL Bedienungsanleitung

AXIOMTEK

AXIOMTEK eBOX670-883-FL Series Bedienungsanleitung

AXIOMTEK

AXIOMTEK AIE100-T2NX Series Bedienungsanleitung

AXIOMTEK

AXIOMTEK eBOX630-100-FL Series Bedienungsanleitung

AXIOMTEK

AXIOMTEK eBOX635-881-FL Bedienungsanleitung

AXIOMTEK

AXIOMTEK IPC974-519-FL Bedienungsanleitung

AXIOMTEK

AXIOMTEK eBOX671-885-FL Series Bedienungsanleitung

AXIOMTEK

AXIOMTEK GO712S-837-R-E3845-24-110VDC Bedienungsanleitung

AXIOMTEK

AXIOMTEK IPC972 Bedienungsanleitung

AXIOMTEK

AXIOMTEK EBOX670-891-FL Series Bedienungsanleitung

AXIOMTEK

AXIOMTEK eBOX625-312-FL Bedienungsanleitung

AXIOMTEK

AXIOMTEK tBOX510-518-FL-24-110MRDC Bedienungsanleitung

AXIOMTEK

AXIOMTEK rBOX630-FL Bedienungsanleitung

AXIOMTEK

AXIOMTEK IPC962-512-FL Series Bedienungsanleitung

AXIOMTEK

AXIOMTEK eBOX671-521-FL Series Bedienungsanleitung

AXIOMTEK

AXIOMTEK eBOX627-312-FL Bedienungsanleitung

AXIOMTEK

AXIOMTEK PANEL1080-845 Bedienungsanleitung

AXIOMTEK

AXIOMTEK EBOX640-500-FL Series Bedienungsanleitung

AXIOMTEK

AXIOMTEK ICO500-518 Series Bedienungsanleitung

AXIOMTEK

AXIOMTEK eBOX671-521-FL Series Bedienungsanleitung

Beliebte Industrie-PC Handbücher anderer Marken

Chipsee

Chipsee PPC-A72-101 Bedienungsanleitung

Advantech

Advantech UNO-2184G Bedienungsanleitung

MSI

MSI MS-9A76 Bedienungsanleitung

Stackrack

Stackrack THOR200 Bedienungsanleitung

Moxa Technologies

Moxa Technologies DA-682C Series Bedienungsanleitung

Nodka

Nodka eBOX-3000-ETC Bedienungsanleitung

Siemens

Siemens SIMATIC IPC627E Bedienungsanleitung

MSI

MSI MS-9A89 Bedienungsanleitung

Artila

Artila Matrix-516 Bedienungsanleitung

Siemens

Siemens SIMATIC Rack PC 840 V2 Bedienungsanleitung

Advantech

Advantech IPPC-6152A Bedienungsanleitung

Beckhoff

Beckhoff CX9020 Bedienungsanleitung

Dell

Dell Embedded Box PC 5000 Bedienungsanleitung

IBASE Technology

IBASE Technology ASB200-918 Series Bedienungsanleitung

Lenovo

Lenovo ThinkCentre M90q Betriebsanleitung

IXXAT

IXXAT Econ 100 Bedienungsanleitung

Kontron

Kontron KBox A-151-TGL Bedienungsanleitung

JLT

JLT 1214N Bedienungsanleitung