Axion AXN-9705 Bedienungsanleitung
AXN-9705
User’s Guide
Digital Multimedia Player
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, (example – use only shielded
interface cables when connecting to computer or peripheral devices). Any
changes or modications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC COMPLIANCE STATEMENT
Volume
Adjust the volume
CF Card Reader
Insert a CF memory
card into the slot
SD/MMC/xD/MS Memory
Card Reader
Insert an SD/MMC/xD/MS
memory card into the slot
USB
Plug an USB Cable
or USB ash drive
DC 9V
Plug the AC adapter
P OW E R P R EV . N EX T
ROTATE
M EN U UP
COPY /DELETE R E T U R N
D OW N
7
P L A Y /P A U S E
M O DE
V O L .
U S B
CF
D C 9 V
P OW E R P R EV . N EX T
R O TA T E
M EN U UP
COPY /DELETE R E T U R N
D OW N
7
P L A Y /P A U S E
M O DE
V O L .
U S B
CF
D C 9 V
Caution: Do not place the unit in direct sunlight or near any source of heat to
avoid the surface of the unit from warping, changing color, or damaging. It is NOT
a malfunction when the unit’s surface becomes hot after long period of operation.
Power LED
Power On/Off Button
Play/Pause/Mode Button
MENU Button
Up/Copy/Delete Button
Down/Rotate Button
Prev./Return Button
Next Button
P OW E R P R EV . N EX T
R O TA T E
M EN U UP
C O P Y / D E L E TE R E T U R N
D OW N
7
P L A Y /P A U S E
M O DE
V O L .
U S B
CF
D C 9 V
CONTROLS AND CONNECTIONS
SIDE VIEW
TOP VIEW
*For detailed feature and function of each key,
please refer to the detailed feature pages.
SOURCE
Press to switch between
memory card reader,USB, or
internal memory as source
ZOOM
Press to zoom into an image
NEXT/RIGHT
CAL/TIME
Switch between the
clock, calendar and
photo display mode
REPEAT
UP/COPY/DEL
LEFT/RETURN
DOWN/ROTATEPLAY/PAUSE/MODE
MENU
The Digital Photo Frame can be used as a free standing display by unfolding the
attached stand to its fully extended position.
NOTE: The stand can be rotated to support the frame in either horizontal or vertical
position. Please ensure the stand is rotated to a position that indicator on the stand
and frames aligned to ensure stability.
The Digital Photo Frame can also be wall-mounted, please use the pre-set slots for
either horizontal or vertical position. (Hardware for mounting is NOT included)
CONTROLS AND CONNECTIONS
POSITIONING THE FRAME
Press MENU button to enter main menu. Use the directional keys to highlight the
“SETTINGS” icon then press “Play/Pause/Mode” button to select.
A. General Setup Page
• BRIGHTNESS: Adjust brightness from -10 to 10
• SLIDE SHOW TIME: Select 05, 10, 30 sec; 01 minute,
or 01 hour display time for each photo
• OSD LANGUAGE: Select the On-Screen-Display language you want
• SLIDE SHOW WITH MP3: ON/OFF
• PHOTO MODE: Normal/Wide Screen
• MATTING: Various Matting pictures for selection and OFF
• DEFAULT: RESET to factory default values
SETUP
B. Clock Setup Page
• CL
OCK MODE: 12-hour or 24-hour display
• CLOCK SETTING: Adjust the time
• AUTO POWER ON: Set the time when the frame is automatically ON.
• AUTO POWER OFF: Set the time when the frame is automatically OFF.
• ALARM MODE: Enable or disable alarm function
• ALARM SETTING: Adjust the Alarm time
• DATE SETTING: Adjust the Month/DAY/YEAR
C. Exit Setup Page
4
PHOTO SLIDE SHOW
The Digital Photo Frame will automatically start a photo slide show every time it is
powered on. The source of the picture will be as following:
Memory Card Reader -> USB devices ->Internal Memory
(Note: to manually change file location, press the “Source” button on the remote
control to select the desired location)
During the slide show, you may press the “Play/Pause/Mode” button once to
PAUSE. The frame will stay on the current picture.
While in the PAUSE mode, you can manually change the picture being displayed by press
“Prev./ Return” or “Next” button to view pictures one by one.
Press the “Play/Pause/Mode” again during the PAUSE mode will bring you to a “BROWSE”
mode that will display 12 pictures at once in a “THUMB NAIL” style.
(Note: The thumb nail will start with the current picture being displayed. Use the
arrow keys “prev”, “next”, “up” or “down” to navigate)
Press the “Play/Pause/Mode” button one more time will bring you back to the slide
show mode which starts with the picture you highlighted in “thumb nail” mode.
• Supported photo format: JPEG
5
Press the “MENU” button to access menu screen of the frame.
Use the direction button to select the “AUDIO” icon then press “Play/Pause/Mode”
to conrm.
The frame will display a list of audio le found on the selected source media
(press “SOURCE” button on the remote to change the location of les to be found)
And the frame will start playback from the first file found. And the default playback
method is to play from rst to last then start over.
Press “REPEAT” button on the remote at any time to change playback mode. The
available modes are Repeat-All (Default), Repeat-One (Repeat the same song), Repeat-
Off (Play till the end of les then stop) and Random (the frame will play back les in a
shufed mode)
(NOTE: If you have changed the repeat mode in video playback feature, it would be
carried over to this feature automatically. The repeat mode is displayed at bottom of
your screen)
• Supported audio format: MP3
MUSIC PLAYBACK
6
Press the “MENU” button to access menu screen of the frame.
Use the direction button to select the “VIDEO” icon then press “Play/Pause/Mode”
to conrm.
The frame will display a list of video le found on the selected source media
(press “SOURCE” button on the remote to change the location of les to be found)
Use the up/down buttons to select a desired video le, the press “Play/Pause/Mode”
to start playback. The default playback mode will automatically play the next le till the
end, then start over from the beginning.
Press “REPEAT” button on the remote at any time to change playback mode. The
available modes are Repeat-All (Default), Repeat-One (Repeat the same le), Repeat-
Off (Play till the end of les then stop) and Random (the frame will play back les in a
shufed mode)
(NOTE: If you have changed the repeat mode in audio playback feature, it would be
carried over to this feature automatically. The repeat mode is displayed at bottom of
your screen)
VIDEO PLAYBACK
7
Press the “MENU” button to access menu screen of the frame.
Use the direction button to select the “CLOCK” icon then press “Play/Pause/Mode”
to conrm.
The frame will display current time and alarm time.
Press the “MENU” button to access menu screen of the frame.
Use the direction button to select the “CALENDAR” icon then press “Play/Pause/Mode”
to conrm.
The frame will display current date and calendar.
CLOCK/CALENDAR DISPLAY
8
Press “MENU” button to enter main menu. Use the directional keys to highlight the
“SETTINGS” icon then press “Play/Pause/Mode” button to select.
Press “NEXT/RIGHT” button to enter “CLOCK SETUP PAGE”. Press “DOWN/ROTATE”
button 6 times then press “Play/Pause/Mode” button to set alarm time. Use LEFT or
RIGHT button to choose the Hour or Minute, then use UP or DOWN button to change the
digit.
Press “LEFT/RETURN” button to nish alarm setting. Remember to use the directional
keys to highlight the “ALARM MODE” icon then press “Play/Pause/Mode” button to turn
on alarm mode. The frame will ring at the alarm time you set.
ALARM CLOCK OPERATION
Inhaltsverzeichnis
