Axis 241Q Blade Bedienungsanleitung

AXIS 241Q/241S - Product Description

Product Description

The AXIS 241Q/S is a new generation,full-featured video server for security su rv eillance

and rem o te monitoring needs,based around the new AXIS ARTPEC-2com pression chip.It

has the ability to digitize up to 4 analog video so u rces and makethese available on the

networkas strea m s ofrea l t

imefullfra m e ra te Motion JP E G video.

The AXIS 241Q is equipped with 4 BNC inputs foranalog video devices and the AXIS 241S

is equipped with 1 BNC inputand a matching loop-through output.The AXIS 241S can

also accommodate Y/C video using an Y/C to BNC cable (notincluded).

The AXIS

241Q/241S is equipped with RS232 and 485 ports for connection ofthird party PTZ

system s and 4 alarm inputs and 4 alarm outputs, which can be connected to various third

party devices,e.g.door sen so rs and alarm bells. Up to 20 view ers can access the unit

simultaneously.

Video can be

view ed in 10 reso lutions (up to 768x576),each with 5 quality levels. The

video serv er contains Video Motion Detection,which allow s the unitto trigger on activity

in the video image,and advanced sch ed u ling tools which can also be used to trigger an

event.As

the AXIS 241Q/241S is designed for use in security sy stem s,itis equipped with

sev era l security features,su ch as IP address filtering,multilevel passw ord and HTTPS.

The AXIS 241Q/241S has a built-in Webserver, providing fullaccess to allfeatures

through the use ofa standard Webbrow ser.The built-in scripttoolallow s basic

applications to be created,providing basic su rv eillance so lutions.Foradvanced

functionality,the video server is easy to integrate through the use ofAXIS HTTP API(more

info on www.axis.com /developer)

H ard w are Inventory

Check the item s su p p lied with your AXIS 241Q/241S againstthe follow ing list:

Item Title/Variants

Video Server AXIS 241Q

AXIS 241S

This docum ent AXIS 241Q/241S User’s M anual

Warranty Docum ent

Pow erSupply

PS-K

Europe

Australia

USA/Japan

Korea

TerminalConnector 12 PIN

Mounting Kit

OptionalAccessories ACC Y/C TO BNC CABLE (AXIS 241S only)

PartNo.21339

The pow ersupply is country

specific,please check thatthe

type ofpow ersupply you are

using is correct.

6AXIS 241Q/241S - Product Description

AXIS 241Q Front Panel

Indicators - After com pletion of the startup and selftest ro u tines,the multi-co lored

Network,Status,Pow erIndicators flash as follow s:

DIP Sw itch es - A corresponding line termination sw itch for each of the supported video

inputs. Allunit

s are sh ipped with the line termination en abled for each supported video

input;thatis, with the DIP sw itches set in the dow n-position.

Note:

Ifthe AXIS 241Q is to be connected in parallelwith otherequipm ent,disable the inputtermination by

turning the corresponding DIP sw itch to the up-position (O FF).Failure to do this maycause reduced image

quality.

Contro l Button - P ress this button to restore the factory defaultsettings,as described in

Resetting to Factory DefaultSettings,on page 38 orto installusing AXIS Internet Dynam ic

DNS Service (page 13).

Video Inputs - Accommodates up to 4 sep a rate video so u rces

(VIDEO 1- VIDEO 4)

simultaneously.Each supported video inputis connected using a coax/BNC con n ector.

Physical connections madeusing RG59 75 Ohm coax video cable have a recom m ended

maximum length of800 feet (250 meters).

NetworkAm ber Flashes foractivity on a 10 Mbit/s network

Green Flashes foractivity on a 100 Mbit/s network

Red Flashes rapid red forhardw are error,togetherwith the Status indicator

None No connection

Status Green Normaloperation

Am ber Flashes during reset to factory defaultorat firmware upgrade

Red Flashes rapid red fora hardw are error,togetherwith the Network indicator

Pow er Green Normaloperation

Am ber Flashes green/am berduring upgrade

AXIS 241Q/241S - Product Description

AXIS 241S Front Panel

Indicators - After com pletion of the startup and selftest ro u tines,the multi-colored

Network,Status,Pow erIndicators flash as follow s:

DIP Sw itch es - the AXIS 241S is delivered configured for com posite video input.

Note:

Ifthe AXIS 241S is to be connected in loop through with otherequipm ent,disab le the inputtermination by

setting sw itch 1 to the up-position (O FF).Failure to do this maycause reduced imagequality.

Contro l Button - Press this button to restore the factory defaultsettings,as described in

Resetting to Factory DefaultSettings,on page 38 orto installusing AXIS InternetDynam ic

DNS Service.See “A X IS Intern et Dynam ic DNS Service” on page 13.

Video Input

- CoaxialBNC connector supporting a single com posite video so u rce.The

physical connection is madeusing RG59,75 Ohm coax video cable with a recom m ended

maximum length of800 feet (250 meters).

Note:

The AXIS 241S supports conversion betweencom posite video and Y/C (s-video)using an Y/C to BNC cable.

Video Output- A single video loop-through (VIDEO OUT)connected in parallel with

VIDEO IN and term inated with a coax/BNC connector.Allow s direct connection of,e.g.an

ex tern al monitor.Setdipsw itch to OFF when in use.

NetworkAm ber Flashes foractivity on a 10 Mbit/s network

Green Flashes foractivity on a 100 Mbit/s network

Red Flashes rapid red forhardw are error,togetherwith the Status indicator

None Noconnection

Status Green Normaloperation

Am ber Flashes during reset to factory defaultorat firmware upgrade

Red Flashes rapid red fora hardw are error,togetherwith the Network indicator

Pow er Green Normaloperation

Am ber Flashes green/am berduring upgrade

Sw itch 1 2 3 4

Description 75 ohm video in

termination

75 ohm video out

termination

connects video in and

video out

Notused

Com posite video input on offon n/a

Y/C video input on on offn/a

Andere Handbücher für 241Q Blade

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Axis Server Handbücher

Axis

Axis 700 Bedienungsanleitung

Axis

Axis AXIS 243Q Blade Bedienungsanleitung

Axis

Axis AXIS 241QA Bedienungsanleitung

Axis

Axis exacqVision Edge Bedienungsanleitung

Axis

Axis 291 1U Bedienungsanleitung

Axis

Axis Camera Station S1216 Tower Bedienungsanleitung

Axis

Axis AXIS StorPoint CD Bedienungsanleitung

Axis

Axis 241Q Blade Bedienungsanleitung

Axis

Axis 5600+ Bedienungsanleitung

Axis

Axis 241Q Blade Bedienungsanleitung

Axis

Axis Q7900 Rack Bedienungsanleitung

Axis

Axis T8085 PS57 Bedienungsanleitung

Axis

Axis 7100 Bedienungsanleitung

Axis

Axis 2400+ Bedienungsanleitung

Axis

Axis S2016 Bedienungsanleitung

Axis

Axis 240Q Blade Bedienungsanleitung

Axis

Axis 241Q Blade Bedienungsanleitung

Axis

Axis Video Server 242S IV Bedienungsanleitung

Axis

Axis E100 Bedienungsanleitung

Axis

Axis 27756R1 Bedienungsanleitung

Axis

Axis 7000 Bedienungsanleitung

Axis

Axis T8082 Bedienungsanleitung

Axis

Axis AXIS 243Q Blade Bedienungsanleitung

Axis

Axis 2400 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung