Axis 241Q Blade Bedienungsanleitung

FRANÇAIS

DEUTSCH

ESPAÑOL

ITALIANO

ENGLISH

Axis Video Server

Installation Guide

Axis Video Server Installation Guide Page 3

ENGLISH

Axis Video Server Installation Guide

This installation guide provides instructions for installing an Axis Video Server on your

network. These instructions apply to the models listed below. For all other aspects of using the

product, please see the product User’s Manual, available on the CD included in this package, or

from www.axis.com

Installation steps

Follow these steps to install the Axis Video Server on your local network (LAN):

1. Check the package contents against the list below.

2. Connect the Axis Video Server. See page 6.

3. Set an IP address. See page 7 for information on the available methods.

4. Set the password. See page 11.

Package contents

Item Description

Axis Video Server models AXIS 240Q

AXIS 241S

AXIS 241Q

AXIS 241QA

AXIS 242S IV

AXIS 243SA

Power adapter models Type PS-K, country-specific

Type PS-E (AXIS 242S IV), country-specific

Mounting kit For wall or rack mounting

Terminal block connector 12-pin connector block for connecting external devices to the I/O terminal connector

CD Axis Network Video Product CD, including installation tools and other software, product

documentation

Printed Materials Axis Video Server Installation Guide (this document)

Axis Warranty Document

Page 4 Axis Video Server Installation Guide

Mounting

The Axis Video Server is supplied with a mounting kit for wall or rack mounting. The

mounting brackets can be positioned for mounting the video server on a vertical surface or in

a rack (4U). Follow the instructions below to attach the brackets to the video server:

Position and attach the brackets on each

side, using the screws provided.

Insert the metal plates in the slots on

each side of the video server.

Slide the grey frame off the front panel

of the video server (no tools needed).

Alternative A

Alternative B

Axis Video Server Installation Guide Page 5

ENGLISH

Overview

DIP switches

LED indicators for Network, Status & Power

Video input (x4)

Control button

Line/Mic In &

Line Out

(241QA only)

Front panel - AXIS 240Q/AXIS 241Q/AXIS 241QA

Video input Control button

Mic In & Line In

Video output

S-Video (Y/C) input

DIP switch

DSP & IV LED indicators

Front panel - AXIS 242S IV

LED indicators for Network, Status & Power

Video input

Control button

Line/Mic In

& Line Out

(AXIS 243SA

only)

Video output

DIP switch

Front panel - AXIS 241S/AXIS 243SA

LED indicators for Network, Status & Power

Power adapter

connector

12-pin I/O terminal

connector

RS-232

connector

Network

connector

Rear panel - all models

Serial number on underside label

Page 6 Axis Video Server Installation Guide

Connections

1. Connect the Axis Video Server to your network using a standard network cable.

2. Connect the video output of your camera(s) to the Axis Video Server, using a standard

75 Ohm coaxial video cable with BNC connectors.

3. Connect power, using the supplied power adapter, or via the terminal connector on the rear

panel (see the User’s Manual for more information).

4. An active speaker and a microphone can be connected to the AXIS 241QA/AXIS 243SA to

provide two-way audio.

Notes: • Use an RCA-to-BNC adapter if your camera has a standard phono-type (RCA) connector.

• Y/C video can be connected directly to the AXIS 242S IV, via the S-Video connector.

• To connect Y/C video to the AXIS 241S/AXIS 243SA, use a Y/C to BNC adapter cable (not supplied). See the AXIS

Video Server User’s Manual for more information.

• The Line In & Mic In connectors on the AXIS 242S IV are used for audio analysis only.

Axis Video Server Installation Guide Page 7

ENGLISH

Setting the IP address

The Axis Video Server is designed for use on an Ethernet network and must be assigned an IP

address to make it accessible.

AXIS IP Utility

All installation methods

This table shows all of the available methods for setting or discovering the IP address. Select a

method from the left-hand column and check the requirements for it to the right.

Notes: • UPnP™ and DHCP are both enabled by default.

• The Axis Video Server has the default IP address 192.168.0.90

• To view the admin pages for the DHCP server, please see the server’s own documentation. You may need to

contact your network administrator.

• If setting the IP address fails, check that there is no firewall blocking the operation.

• If you would like to use a language other than English for the web interface of your Axis camera, it can be

downloaded from www.axis.com/techsup/. See “The AXIS Internet Dynamic DNS Service” on page 10.

AXIS IP Utility is the recommended method for setting an IP address in Windows. This free application can

be used on networks with or without a DHCP server. See page 8 for more information.

DHCP Server in

network

Install on same

network segment

Internet connection

with no HTTP proxy

Operating

system

AXIS IP Utility

(recommended method)

See page 8

Optional Required Windows

UPnP™

See page 9

Optional Required Windows

(ME or XP)

ARP/Ping

See page 9

Required All

operating

systems

AXIS Internet Dynamic DNS

Service

See page 10

Recommended Required All

operating

systems

View DHCP server

admin pages for IP address

(See note below)

Required All

operating

systems

Requirements

methods

Installation

Page 8 Axis Video Server Installation Guide

AXIS IP Utility

AXIS IP Utility is a free Windows

application that discovers and displays

Axis devices on your network.

The application can also be used to

manually set a static IP address.

Note that you must install the Axis Video

Server on the same network segment

(physical subnet) as the computer running

AXIS IP Utility.

AXIS IP Utility is available on the CD

supplied with this product, or it can be

downloaded from www.axis.com/techsup

Automatic discovery

1. Check that the Axis Video Server is connected to the network and that power has been

applied.

2. Start AXIS IP Utility. When the Axis Video Server appears in the window, double-click it

to open the unit’s home page.

3. See page 11 for instructions on how to set the password.

Set the IP address manually

1. Acquire an unused IP address on the same network segment your computer is connected

to.

2. Click the button (Set IP address using serial number) and enter the serial number and

IP address for the Axis Video Server.

3. Click the Set IP button and then restart the Axis Video Server.

4. Click View Home Page to access the Axis Video Server’s web pages.

5. See page 11 for instructions on how to set the password.

Note:

AXIS IP Utility can be used to change a dynamically set IP address to a static one.

Axis Video Server Installation Guide Page 9

ENGLISH

UPnP™

UPnP™functionality is enabled by default in the Axis Video Server. If also enabled on your

computer (Windows ME or XP), the video server will automatically be detected and a new icon

will be added to “My Network Places.” Click this icon to access the Axis Video Server.

See also page 11 for instructions on how to set the password.

Manual Installation with ARP/Ping

1. Acquire an unused IP address on the same network segment your computer is connected

to.

2. Locate the serial number (S/N) on the underside label (see page 5).

3. Open a Command Prompt on your computer. As appropriate for your operating system,

enter the following commands:

4. Check that the network cable is connected. Start/restart the Axis Video Server by

disconnecting and reconnecting power, which must be done within 2 minutes of entering

the ARP command.

5. Close the Command prompt when you see ‘Reply from 192.168.0.125: ...’ or similar.

6. Start your browser, type in http://<IP address> in the Location/Address field and press

Enter on your keyboard.

7. See page 11 for instructions on how to set the password.

Notes: • To open a command prompt in Windows: from the Start menu, select Run... and type cmd (or command in

Windows 98/ME). Click OK.

• To use the ARP command on a Mac OS X, use the Terminal utility, which is found under Application > Utilities.

Windows syntax:Windows example:

arp -s <IP Address> <Serial Number>

ping -l 408 -t <IP Address> arp -s 192.168.0.125 00-40-8c-18-10-00

ping -l 408 -t 192.168.0.125

UNIX/Linux/Mac syntax:UNIX/Linux/Mac example:

arp -s <IP Address> <Serial Number> temp

ping -s 408 <IP Address> arp -s 192.168.0.125 00:40:8c:18:10:00 temp

ping -s 408 192.168.0.125

Note:

To install the UPnP™ service on your computer, open the Control Panel from the Start Menu and select

Add/Remove Programs. Select Add/Remove Windows Components and open the Networking Services

section. Click Details and then select UPnP as the service to add.

UPnP™ is a certification mark of the UPnP™ Implementers Corporation.

Page 10 Axis Video Server Installation Guide

The AXIS Internet Dynamic DNS Service

The AXIS Internet Dynamic DNS Service is a free service provided by Axis, which allows you

to quickly and simply install your Axis Video Server, which then receives a static name (DNS

name) and a dynamic IP address. More information about the AXIS Internet Dynamic DNS

Service is available at www.axiscam.net

To perform this procedure, your network should have an Internet connection with no HTTP

proxy, and IP addresses should preferably be assigned via DHCP.

Follow these instructions:

1. After making the connections for network and power, wait for the Status indicator to show

a steady green.

2. Press the Control button once. The Status indicator flashes green while it connects to the

AXIS Internet Dynamic DNS Service.

3. Wait for the Status indicator to go back to showing a steady green.

4. To complete the installation, now visit www.axiscam.net from an Internet connected

computer. This must be done within 60 minutes of pressing the Control button.

5. Follow the on-screen instructions provided by the AXIS Internet Dynamic DNS Service.

You will need the product’s serial number to complete the installation. See page 5. See also

page 11 for instructions on how to set the password.

Important!

To remove the DNS name and unregister from this service, open the Setup pages in the Axis

Video Server, click System Options > Network > TCP/IP > Basic, click the Settings button for

the AXIS Internet Dynamic DNS Service and finally, click the Remove button.

Please note that this procedure will send the Axis Video Server’s IP address, firmware version, product type,

HTTP port and serial number to the AXIS Internet Dynamic DNS Service. No personal information is trans-

ferred.

Andere Handbücher für 241Q Blade

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Axis Server Handbücher

Axis

Axis 247S Bedienungsanleitung

Axis

Axis Camera Station S1232 Tower Bedienungsanleitung

Axis

Axis E100 Bedienungsanleitung

Axis

Axis 200+ Bedienungsanleitung

Axis

Axis Q7424-R Mk II Bedienungsanleitung

Axis

Axis 242S Bedienungsanleitung

Axis

Axis 25281R1 Bedienungsanleitung

Axis

Axis 2400+ Bedienungsanleitung

Axis

Axis 950 Bedienungsanleitung

Axis

Axis 282 Bedienungsanleitung

Axis

Axis AXIS 243Q Blade Bedienungsanleitung

Axis

Axis 7100 Bedienungsanleitung

Axis

Axis 5600+ Bedienungsanleitung

Axis

Axis AXIS 241QA Bedienungsanleitung

Axis

Axis 240Q Blade Bedienungsanleitung

Axis

Axis FA54 Bedienungsanleitung

Axis

Axis 291 1U Bedienungsanleitung

Axis

Axis 70 Bedienungsanleitung

Axis

Axis 291 1U Bedienungsanleitung

Axis

Axis AXIS 240 Bedienungsanleitung

Axis

Axis 241Q Blade Bedienungsanleitung

Axis

Axis Developer Board and Device Server AXIS 82+ Bedienungsanleitung

Axis

Axis 247S Bedienungsanleitung

Axis

Axis Camera Station S1216 Tower Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung