Axxess AX-DSP-X Bedienungsanleitung

AX-DSP-X

INSTALLATION INSTRUCTIONS

Google Play Store Apple App Store

iOS 12.1 or higher

INTERFACE FEATURES

INTERFACE COMPONENTS

TOOLS & INSTALLATION ACCESSORIES REQUIRED

• Crimping tool and connectors, or solder gun,

solder, and heat shrink • Tape • Wire cutter

• Zip ties • Multimeter

TABLE OF CONTENTS

Preface ....................................................................2

Installation Options ...............................................3

Installation .............................................................3

Connections ........................................................ 4-7

AX-DSP-X app .................................................... 8-17

Pinout ....................................................................18

Speciﬁcations ....................................................... 19

Axxess 10-Channel Digital Signal Processor

• 31 Band graphic EQ

• 6 Inputs, 10 individually assignable outputs

• Independent equalization on each of the 10 outputs

• Independent high pass, low pass, and bandpass ﬁlters

• Each channel can be delayed independently up to 10ms

• Easy behind the radio installation in most applications

• Can be used with OE and aftermarket radios

• Chime control for GM/Chrysler vehicles

• Clipping detection and limiting circuits

• Bass knob included

• Retains OE voice prompts (SYNC® and OnStar®)

• Retains factory chimes including parking sensor and cross path

detection alerts

•

Settings adjusted via Bluetooth® in a smart device application (tablet

or mobile phone), compatible with both Android and Apple devices

• Read, write, and store conﬁgurations for future recall

• Password protect feature available in the mobile app

• Micro-B USB updatable

• AX-DSP-X interface

• AX-DSP-X harness (16-pin & 20-pin)

PREFACE

The AX-DSP-X can be used with an aftermarket system, OEM system, and also an OEM system that is ampliﬁed with either an analog or digitally controlled (ﬁxed signal) OEM ampliﬁer

The AX-DSP-X can also grow as your stereo system grows. Start off by adding a subwoofer to an OEM system, then add on from there. Simply reference the Installation Options page to

change the AX-DSP-X to the new system. All 10 channels of the AX-DSP-X can be assigned however needed for the installation at hand. If 10 channels of a subwoofer signal is needed,

the AX-DSP-X can do it.

In the following section,

Installation Options

, choose the installation type, then either click on the hyperlink, or reference the page number.

It is highly suggested to use an AX-DSP-X pre-wired harness (sold separately) unless you are installing it with an aftermarket radio. As such, the instructions are written in that

manner. Certain connections to the vehicle are unique per vehicle and will require the pre-wired harness to reference to.

The AX-DSP-X provides a 12v 1-amp output to turn on an aftermarket ampliﬁer. If installing multiple ampliﬁers, an SPDT automotive relay will be required if the current exceeds that

amount. Use Metra part number E-123 (sold separately) for best results.

If installing the AX-DSP-X behind the radio to install a sub amp, the OEM amp can be retained for mids/highs. If installing the AX-DSP-X at the OEM amp location, the OEM amp must

be fully removed.

In most cases the CAN Bus wires need to be connected in order for the AX-DSP-X to communicate with the vehicle to turn on and provide an amp turn-on output.

REV. 7/24/2019 INSTAX-DSP-X

Aftermarket radio system:

The AX-DSP-X can be used with an aftermarket radio to improve the overall listening experience for

car audio enthusiasts. Installers will connect the RCA inputs from the AX-DSP-X to the outputs from

the aftermarket radio; Front, Rear, Sub (sub is optional). When using an aftermarket radio with the

AX-DSP-X, General must be chosen for the vehicle type. (refer to page 4)

Adding a subwoofer to an OEM System:

This feature offers the Installer the ability to add an aftermarket subwoofer to an OEM system,

whether the OEM system is non-ampliﬁed, or ampliﬁed with an analog or digitally controlled (ﬁxed

signal) ampliﬁer. If the vehicle is equipped with noise canceling mics, they must be disabled for this

type of system. (refer to page 5)

OEM System without an ampliﬁer:

This option allows the Installer to wire the AX-DSP-X directly to the speaker outputs from the OEM

radio for an audio signal (high-level). (refer to page 6)

OEM System with an “analog” ampliﬁer:

This option allows the Installer to tap directly to the output of the OEM radio and feed an audio

signal into the AX-DSP-X. This type of installation requires the removal of the factory ampliﬁer, and

will provide a full range signal to the input side of the AX-DSP-X. (refer to page 7)

OEM System with a “digitally controlled” ampliﬁer:

Digitally controlled systems function differently than analog systems. They have a ﬁxed level audio

signal that is controlled through the vehicle’s CAN bus. In most cases the programming content (audio)

provided is just two channels, which can be either front or rear. The other channels are for content like

Phone/Bluetooth, SMS reader, SYNC, or OnStar. The AX-DSP-X can retain these OEM features, and also

provide a clean audio signal. This type of installation requires the removal of the factory ampliﬁer, and

will provide a full range signal to the input side of the AX-DSP-X. (refer to page 7)

Factory Radio Systems

1. Remove the factory radio*, then unplug all connectors.

2. Install the vehicle speciﬁc T-harness (sold separately) and make all necessary

connections, but leave the amp turn-on wire disconnected.

3. Plug the 20-pin AX-DSP-X harness into the AX-DSP-X.

4. Plug the 16-pin AX-DSP-X harness into the AX-DSP-X.

5. Plug all connectors back into the OEM radio.

Download and install the AX-DSP-X app from the Google Play Store or Apple App Store

7. Using the app, select the vehicle.

8. Connect the amp turn-on wire from the AX-DSP-X.

9. Test all functions of the installation, then reassemble the dash to complete the

installation.

* Refer to Metra online for dash disassembly. If Metra makes a dash kit for the

vehicle, disassembly will be within the instructions.

Aftermarket Radio Systems

1. Complete all necessary connections to the radio and vehicle, but leave the amp

turn-on wire disconnected.

2. Plug the 20-pin AX-DSP-X harness into the AX-DSP-X.

3. Plug the 16-pin AX-DSP-X harness into the AX-DSP-X.

Download and install the AX-DSP-X app from the Google Play Store or Apple App Store

5. Using the app, select the vehicle.

6. Connect the amp turn-on wire from the AX-DSP-X.

7. Test all functions of the installation, then reassemble the dash to complete the

installation.

INSTALLATION OPTIONS I N S TAL L AT IO N

FrontRearSub

Bass Knob

(included)

RCA Jacks

(sold separately)

Aftermarket Radio

AX-DSP-X

(included)

Do not use amp turn-on

from aftermarket radio!

Any remaining wires

tape off and disregard

Blue/White - Amp Turn-On Wire

Assignable Outputs Labeled CH 6-10

INPUT 5

INPUT 6

INPUT 5

Optional

An SPDT relay, Metra part number

E-123, must be used if more than

one amplifier will be installed

Black - Chassis Ground

Yellow - Battery Power

Red - Accessory Power

Orange - Control Wire

AFTERMARKET RADIO SYSTEM

REV. 7/24/2019 INSTAX-DSP-X

ADDING A SUBWOOFER TO AN OEM SYSTEM

RCA Jacks

(sold separately)

AX-DSP-X (included)

Blue/White - Amp Turn-On Wire

Bass Knob (included)

Factory Radio

These outputs can be used for

additional sub amps, or for adding

onto the system at a later date

Factory Harness

AX-DSP-X pre-wired harness

(sold separately)

Refer to pre-wired harness

for wire connections

Keep Connected

SUB

Orange - Control Wire

OEM SYSTEM WITHOUT AMP

RCA Jacks

(sold separately)

AX-DSP-X (included)

Blue/White - Amp Turn-On Wire

Assignable Outputs Labeled CH 6-10

An SPDT relay, Metra part number

E-123, must be used if more than

one amplifier will be installed

Bass Knob (included)

Factory Radio

Factory Harness

AX-DSP-X pre-wired harness

(sold separately)

Refer to pre-wired harness

for wire connections

Unplug Connector

SUB

Orange -

Control Wire

REV. 7/24/2019 INSTAX-DSP-X

OEM SYSTEM WITH AMP BYPASS HARNESS

RCA Jacks

(sold separately)

AX-DSP-X (included)

Blue/White - Amp Turn-On Wire

Assignable Outputs Labeled CH 6-10

An SPDT relay, Metra part number

E-123, must be used if more than

one amplifier will be installed

Bass Knob (included)

Orange - Control Wire

AX-DSP-X pre-wired harness

(sold separately) Refer to pre-wired harness

for wire connections

SUB

Factory Amp

(must be removed)

Factory Amp Harness

Speaker Wire Out to Amp(s)

AX-DSP-X APP

Setup Instructions

• General information tab for installing the AX-DSP-X.

Continued on the next page

REV. 7/24/2019 INSTAX-DSP-X

AX-DSP-X APP (CONT.)

Bluetooth Connection

• Scan - Press this button to start the Bluetooth pairing process, then

select the AX-DSP-X from the mobile device. The AX-DSP-X must be

powered during this process. Conﬁrmation that you are connected

will show in the top left corner of the app.

• Disconnect - Disconnects the AX-DSP-X from the app.

Continued on the next page

AX-DSP-X APP (CONT.)

Conﬁguration

• Identify - Click this button to conﬁrm that the AX-DSP-X is connected

properly. If so, a chime will be heard from the front left speaker.

• Reset to Defaults - Resets the AX-DSP-X to factory settings. During the

reset process the ampliﬁers will shut off for 5-10 seconds.

•

Vehicle Type - Select the vehicle type from the drop down box, select either

Without OE Ampliﬁer or With OE Ampliﬁer, then click the apply button

• Lock Down - Click this button to save the selected settings.

Attention! This button must be selected before closing the app or cycling

the key otherwise all settings will be lost.

•

Save Conﬁguration - Saves the current conﬁguration to the mobile device

• Recall Conﬁguration - Recalls a conﬁguration from the mobile device.

Andere Handbücher für AX-DSP-X

Inhaltsverzeichnis

Andere Axxess Computerhardware Handbücher

Axxess

Axxess AXDSP-L Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung