Aztech E310 Bedienungsanleitung

Aztech E310-Single/Twin BlackDect Phone

Page 2 of

2009 ©

All

rights r

No part of this

document

may be

reproduced, r

pub

or r

tte

in any form or by any

whatsoever, whether

electronically or

mechanically,

including, but not limited to, by way of

recording,

information

recording, or through retrieval

systems

without the express written

permission.

reserve

the right to revise this

document

at any time without the obligation to notify any person

entity.

All

other company or product

names mentioned

are used for

identification purposes

only and

trademarks

of their r

LIMITATION OF LIABILITY AND

THE PRODUCT AND THE SOFTWARES WITHIN ARE PROVIDED

"AS IS," BASIS.

THE MANUFACTURER A

MANUFACTURER’S RESELLERS

(

REFERRED TO AS “THE

”

)

DISCLAIM ALL

IMPLIED

INCLUDING WITHOUT LIMITATION THE

WARRANTIES OF

NON-

MERCHANTABILITY

FITNESS FOR A PARTICULAR

PURPOSE,

ANY WARRANTIES A

FROM COURSE OF

COURSE OF

USAGE OF

EVENT WILL THE

BE LIABLE FOR DAMAGES

INCLUDING BUT NOT LIMITED TO

SPECIAL

EXE

DAMAGES FOR LOSS OF

OR DAMAGES FOR LOSS OF BUSINESS OF ANY CUSTOMER OR ANY THIRD PARTY ARISING OUT OF

USE

THE INABILITY TO USE THE PRODUCT

THE

INCLUDING BUT NOT LIMITED TO

RESULTING FROM DEFECTS IN THE PRODUCT

SOFTWARE OR

LOSS

INACCURACY

DATA OF ANY

WHETHER BASED

TORT OR ANY OTHER LEGAL

EVEN IF THE

HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES.

THE ENTIRE RISK AS TO THE RESULTS

PERFORMANCE OF THE PRODUCT OR ITS SOFTWARE IS ASSUMED BY CUSTOMER. BECAUSE SOME STATES DO

ALLOW THE EXCLUSION

LIMITATION OF LIABILITY FOR

THE ABOVE LIMITATION MAY NOT A

TO THE PARTIES. IN

EVENT WILL THE SELLERS’TOTAL CUMULATIVE LIABILITY OF EACH AND EVERY KIND I

RELATION TO THE PRODUCT OR ITS SOFTWARE EXCEED THE AMOUNT PAID BY CUSTOMER FOR THE

ODUCT.

Page 3 of

Contents

Handset Key Layout................................................................................................................................5

LCD Display and Icons.............................................................................................................................6

Battery Indicator.....................................................................................................................................6

Navigating the Menu .............................................................................................................................7

Menu Option List ....................................................................................................................................7

Setting the language..............................................................................................................................8

Outgoing calls.........................................................................................................................................8

Making a phone call...........................................................................................................................8

Pre dial Method..................................................................................................................................8

Dialing from recent call list................................................................................................................8

Answering an Incoming calls.................................................................................................................9

Setting the volume.................................................................................................................................9

Handset Setting......................................................................................................................................9

Setting the ring volume and melody ................................................................................................9

Handset melody .................................................................................................................................9

Handset ring volume..........................................................................................................................9

Handset name ..................................................................................................................................10

Turning key beep on/off .................................................................................................................10

Manual selection (Only applicable to User using two bases unit) ................................................10

Auto Pickup.......................................................................................................................................10

Phonebook........................................................................................................................................10

Adding phonebook entries ..............................................................................................................10

Dialing a Phonebook entry ..............................................................................................................11

Editing name or number..................................................................................................................11

Deleting an entry .............................................................................................................................11

Deleting All entry .............................................................................................................................11

Caller-ID functions (CLIP)..................................................................................................................11

Page 4 of

New calls ..........................................................................................................................................11

Call Log..............................................................................................................................................11

Calling from the Call log...................................................................................................................12

Erasing a number from the Call list.................................................................................................12

Erasing all numbers from the Call list .............................................................................................12

Store a number from the call log into the phonebook ..................................................................12

Date Time setting.............................................................................................................................12

Register/de-register a handset...........................................................................................................12

Register to a DECT base....................................................................................................................12

To register a handset .......................................................................................................................13

Removing a handset ........................................................................................................................13

Call transfer and Intercom between two handsets............................................................................13

Call transfer and conference call during an external call...................................................................13

To transfer the outside call to another handset .............................................................................13

Internal call (intercom) ....................................................................................................................14

To end an intercom call....................................................................................................................14

Reset of the handset............................................................................................................................14

Base Setting..........................................................................................................................................15

Changing the PIN code (system PIN code).........................................................................................15

Page 5 of

Handset Key Layout

Press to enter menu

mode and enter sub-

menu or to confirm the

selection.

4 - MENU button

1 –Call Button

button

Press to begin and answer

the call

2 –Recall/ Phone

Pulse button

You can activate Recall

function if your phone is

connected toa PABX,or if

you use Select Services.

3 - Phonebook

In standby mode, press to

enter phonebook mode.

Press to confirm selection

5 - MuteRinger

Press when the phone is in

standby to mute the ringer.

6 - Volume

Allow you to adjust the

handset volume

7–Speaker Phone

Press to turn on/off the

speaker phone.

Press during a call to

mutethe microphone

8 - MuteCall

9 - Intercom button

Press to make an intercom call

(if you have more thanone

handset)

10 –Keypad Lock

Press and hold to lock /

unlock the keypad on the

handset

11 –Flash Selection

Press to select long / short

flash.

Page 6 of

LCD Display and Icons

Battery Indicator

When the battery is flat or low power, you will see an empty battery symbol in the display

screen. The handset will no longer able to perform normal operation if the battery is flat or low

power. You are recommended to place the handset back onto the base unit for recharging the

battery. It is recommended that the handset is to be charged at least 8 hours to ensure maximize

the battery life span.

• Full battery

• Empty battery

When you are in the midst of a conversation and the handset will emit a warning beep sound if

the battery is low in power. The call will be disconnect once the battery is flat, you are advised to

place the handset on the base unit to charge.

Page 7 of

Navigating the Menu

The Aztech E310 has a menu page. In the menu there are a list of options which enable you to

customize your phone settings.

To enter the menu, press the Menu button (4). Use the Right (7) or Left (2) key tonavigate to the

option you want to customize. Press OK (4) to show more options or to confirm thesetting

changed. To go back in the previous menu or exit the menu, press the ESC/INT (9) key.

Menu Option List

Phonebook

Handset

Base

New Entry

Ring Tone

External

Dial Mode

Tone

Edit Entry

Internal

Pulse

Delete Entry

Volume

Recall

Short

Delete All

Auto Talk

Long

Off

System Pin

Handset Name

Keypad Beep

Off

Reset

Language

Date Time

De Register

Page 8 of

Setting the language

The option enable user to choose the preferred language display on the handset.

You can do so by selecting the Menu button (4) Use the Left (2) or Right (7) button to navigate

to ‘Handset’ option and press Confirm/OK (4) button to open another list of options. Use the

Left (2) or Right (7) keys again to navigate to ‘Language’ option and press OK (4).

You may now select your preferred language by using the Right (7) or Left (2) key. To confirm

your selection by pressing Confirm/OK (4) button.

Outgoing calls

Making a phone call

Press the Call button (1) and you will hear the dial tone. You may enter the telephone

number you wish to dial.

Press the Call button (1) when you want to end the call.

Pre dial Method

Enter the telephone number and press the Call button. Your call will be connected shortly.

To correct the number which you have entered wrongly in the pre-dial, you can do so by using

the Mute button (8) to delete the number entered.

Take note that if you haven’t pressed any button for 20 seconds, the handset will return to

standby mode, and you will have to enter the number again.

Dialing from recent call list

This option allows you to dial from the last three telephone number called from this handset.

Press the Call button (1) when you will hear the dial tone. Press the Redial key (11), the last

telephone number you dialed will appear on the display. Navigate by using the Left (2) or

Right (7) key to select another last two numbers dialed.

Press the Call button (1) to dial number shown on the display.

Page 9 of

Answering an Incoming calls

To answer an incoming call, press the Call button (1).

Setting the volume

During a conversation you can set the volume by pressing the Volume button (6). You can set

the volume alternatively in between 1-5. You can also use the left/right button to do so.

Handset Setting

Setting the ring volume and melody

You can customized the ringer melody for an incoming call (external) and Intercom call

(internal)

Handset melody

Press Menu button (4). Use the Left or Right button to scroll to ‘HANDSET’and press OK (4).

Use the Left or Right button to scroll to ‘RING TONE’ and press OK (4).Use the Left or Right

button to scroll to ‘EXTERNAL’ or ‘INTERNAL’ and press OK (4).Select the melody you want,

and then press OK (4).

Or the external call melody can be set as follows:

Press and hold the melody button (6) until the current melody is heard. Select the desired

melody (1-9) by means of the Left or Right keys. Press melody button (6) again to confirm the

setting.

Handset ring volume

Press Menu button (4) Use the Left or Right button to scroll to ‘HANDSET’ and press OK

(4).Use the Left or Right button to scroll to ‘RING TONE’ and press OK (4).Use the Left or

Right button to scroll to ‘VOLUME’ and press OK (4).Select the volume level you want, and

then press OK (4).

Press the volume button (6) in standby. The handset will ring in the current volume. Use the

Left or Right keys to select the desired volume (0-5). Press the volume button (6) again to

confirm the setting.

Note: When the volume is set to 0, the handset will not ring when there is an incoming call

and the display will show

Page 10 of

Handset name

You can change the name that appears on the screen (max. 9 characters). Press Menu key

(4).Use the Left or Right button to scroll to ‘HANDSET’ and press OK Use the Left or Right

button to scroll to ‘HANDSET NAME’ and press OK (4).The current handset name will be shown.

Delete the character by the Mute button (8). Use the keypad to enter the new name. Press the

Menu/OK (4) button to confirm.

Turning key beep on/off

You can turn off or on the handset keypad sound. Press Menu button (4). Use the Left or

Right button to scroll to ‘HANDSET’ and press OK (4).Use the Left or Right button to scroll to

‘KEYPAD BEEP’ and press OK (4).Use the Left or Right button to scroll to ‘ON’ and press OK (4).

Manual selection (Only applicable to User using two bases unit)

If you set the handset to ‘manual selection’, the handset will only detect the base unit you

have selected. Press Menu button (4). Use the Left or Right button to scroll to ‘HANDSET’

and press OK (4).Use the Left or Right button to scroll to ‘SELECT BASE’ and press OK (4).Use the

Left or Right button to select to ‘MANUAL’ or ‘AUTO’.Select “MANUAL’ if you want to set it as

MANUAL mode.

Note: When you have activated Automatic base selection and the handset is out of range on

the current base, the handset will only search for the strongest base in the surrounding.

Caution: Before you can select a base unit, the handset must be registered to the base first.

Auto Pickup

The call will be automatically pickup when the handset is taken out from the base when there

is an incoming call. This feature can be enabled or disabled with the steps below;

Press Menu button (4). Use the Left or Right button to scroll to ‘HANDSET’ and press OK

(4).Use the Left or Right button to scroll to ‘AUTO TALK’ and press OK (4).Use the Left or Right

button to select to ‘ON’.

Phonebook

You can program 20 phonebook entries in the phone’s memory. Display Names can be up to

16 characters and telephone numbers can be up to 24 digits.

Adding phonebook entries

Press the Phonebook button (3) until the icon is on, Press OK key (4) and ‘NEW ENTRY’ will

display. Press OK key (4) and enter the name by using the alphanumerical keypad. Press the

Menu/OK key (4) to confirm the name. Enter the telephone number, and Press the Menu/OK

key (4) to confirm.

Andere Handbücher für E310

Inhaltsverzeichnis

Andere Aztech Telefon Handbücher

Aztech

Aztech SS210 Bedienungsanleitung

Beliebte Telefon Handbücher anderer Marken

GE 2-9480 Bedienungsanleitung

Geemarc

Geemarc PHOTOPHONE 155 Bedienungsanleitung

D-Link

D-Link DWR-720/PW Bedienungsanleitung

Interquartz

Interquartz Gemini IQ333 Bedienungsanleitung

SSS Siedle

SSS Siedle HT 840-0 Bedienungsanleitung

Motorola

Motorola TITANIUM Bedienungsanleitung

Panasonic

Panasonic ICX Bedienungsanleitung

LG H870DS Bedienungsanleitung

Samsung

Samsung GT-I9500 Bedienungsanleitung

AT&T

AT&T Trimline 205 Bedienungsanleitung

Selta

Selta zenyth 600 Bedienungsanleitung

Doro

Doro AFTI 20 Bedienungsanleitung

UNIQCELL

UNIQCELL A1 Bedienungsanleitung

Panasonic

Panasonic KX Series Bedienungsanleitung

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Bedienungsanleitung

BT Decor 425 Bedienungsanleitung

NEC

NEC SV8500 Bedienungsanleitung

Teledex

Teledex PEARL Bedienungsanleitung