B-52 DV 8512 Bedienungsanleitung
MOBILE ENTERTAINMENT SYSTEM
INSTRUCTIONS MANUAL
DV 8512
CAR DVD/ MP4 PLAYER
www.b52audio.com
INSTRUCTIONS MANUAL 02 - 25
MANUAL DE INSTRUCCIONES 27 - 50
MANUAL DE INSTRUÇÕES 52 - 75
ENGLISH
Notes on Installation 03
Precautions 04
Control Panel Layout 05
Wiring Diagram 06
Basic Operation 06
Radio Operation 07
DVD, MPEG4, VCD, MP3, WMA, CD Operation 08
BLUETOOTH 10
Remote Control Layout 11
Remote Control Operation 12
Setup 17
Installing the Front Panel 20
Cleaning the Connector 20
Unit Installation 22
Specification 24
INDEX
2
Notes on Installation
The unit is designed for 14.4V DC, negative ground operation system only. Before installing
The unit, make sure your vehicle is connected to 14.4V DC negative grounded electric al system.
The negative battery terminal must be disconnected before making connections, Incorrect
can reduce damaging to the unit due to short circuit.
Be sure to connect the color coded leads correctly according to the diagram. Incorrect
connections may cause the unit malfunction or damage the vehicle's electrical system.
Be sure to connect the speaker (-) leads to the speaker (-) terminal. Never connect the left
And right channel speaker cables each other or to the vehicle body. Do not block vents or
radiator panels. Blocking them will cause heat to build up inside and may result in fire.
After the completion of the installation and begin to operate the unit (including replacing the
battery), please press the RESET button on the front panel with pointed objects (such as
ball pen) bo set the unit to initial status
INSTALLATION
3
PRECAUTIONS
4
•DO NOT ATTEMP TO MODIFY THE UNIT; MODIFYING THE UNIT MAY CAUSE AN ACCIDENT.
•STOP THE VEHICLE BEFORE CARRYING OUT ANY OPERATION THAT COULD INTERFERE
WITH YOUR DRIVING.
•DO NOT EXPOSE THIS EQUIPMENTS TO RAIN OR MOISTURE
•DO NOT TURN ON THE UNIT IF THE TEMPERATURE INSIDE THE VEHICLE IS OUT
•THIS PRODUCT IS DESIGNED FOR ONE SINGLE VIDEO OUTPUT, PLEASE USE A SPLITTER
IF YOU WOULD LIKE TO CONNECT FOR MULTIPLE VIDEO OUTPUT.
•TO ENJOY OPTIMUM SOUND AND VISION WHILE PLAYING, HANDLE THE DISC AS
FOLLOWS:
Handle the disc by its edge to keep the disc clean, and do not touch the surface.
Do not use your CDs with paste residue or ink attached.
Do not use CDs with labels or stickers attached, which may leave a sticky residue while
beginning to peel off.
Clean the discs with an optional cleaning cloth. Wipe each disc from center out
Type of Disc Label on the Disc R ecorded Material Size of Disc
MPEG4
Sound and moving
pictures
12CM
DVD
Sound and moving
pictures
12CM
VCD
Sound and moving
pictures
12CM
MP3/WMA
Sound only
12CM
CD
Sound only
12CM
NOTE: The unit is compatible with DVD, DVD+/-R,VCD 1.0/2.0/3.0,SVCD,CD,CD-R,CD-RW and JPEG
CONTROL PANEL LAYOUT
FRONT PANEL LAYOUT
5
1. Reset Button
2. Power Button
3. Volume/ Sel Button
4. Mute Button
5. Preset EQ/ Button
6. Time- Display/ Adjustment
7. Mode Switch
8. Remote Control Sensor
9. Band/ Button 20.USB socket
10. Tuning/ Selecting Tracks
11. LOC/ DX Selector
12. MO/ ST Selector
13. Preset Stations/ AMS
14. Number Button
15. Eject Button
16. DISC Slot
17. LCD Display
18. Release Button
19. Flashing LED
20. USB socket
21. SD/MMC Slot
22. Loudness Button
23. AUX IN
WIRING DIAGRAM
WIRE CONNECTION
6
BASIC OPERATION
Initial System Starts- up
1. Operating the unit for the first time or after replacing the car battery, you should press (18) to
detach the front panel, and LED (19) will be blinking. Press (1) Reset button with a pointed object
(such as a ballpoint) to set the unit to initial procedure.
Turning the Unit On/Off
2. Press POWER button (2) to turn on the unit.
Press it again to turn off.
Vol/ bass/ Tre/ BAL (L- R) Selector
3. For Volume Control (3), rotate VOL knob clockwise to increase the sound level, and anticlock-
wise to decrease the sound level.
Repeatedly press (3), button to select the desired mode in the following order:
NOTE: After selecting the desired mode, you can adjust the current level by rotating the (3) knob.
NOTE: If you turn on Preset EQ function, the Bass and Treble cannot be adjusted. At moment,
repeatedly press the button will change the mode in following order
NOTE: If you don’t adjust the knob within 5 seconds after selecting the desired, the unit will
automatically return to the current mode being displayed.
MUTE FUNCTION
Press (4) button to cut down the sound output, "MUTE" appear in the LCD. (Press it again to
revert the previous volume level).
Setting EQ
1. While listening music, you can set up popular music, lass music and rock music by pressing
(5) “EQ”
button the procedure as follows:
POP mode is selected when the button is first press and pop indicated on LCD.
CLASSIC mode is selected when press the button for the second time and class indicated on
LCD.
ROCK mode is selected when press the button for the third time and rock indicated on LCD.
Press the button for the fourth time to turn off the P- EQ system.
NOTE: Bass mode and treble mode return to initial settings when EQ system is on, “Bass" and
“Treble" disappear
Displaying and Adjusting Time
Time Displaying: Press (6) DISP button and the current time are displayed, and it returns to
original status after 5 seconds or press the button again.
Time Adjusting: Press and hold the button until the clock stop blinking you can rotate (3) knob
to adjust hours. Then press the (3) button once, you can rotate the knob to adjust minutes. After
you finished the time adjustment, longer press (6) button to confirm the time setting.
Mode Selector
Press (7) button to select Radio, Disc, USB, SD/ MMC and AUX mode.
NOTE: You can press “MODE” button to enter USB play mode when you insert a USB can’t read
automatically, for the USB format have some different.
Sensor
(8) Receptor for the card remote commander.
RADIO OPERATION
BAND SELECTOR
Press (9) (BAND) button repeatedly to select band in the following order: `
NOTE: On DVD playing mode, press (9) button to switch to AUTO PAL or NTSC system
Manual/Automatic Tuning
Manual Tuning: Press (10) button continuously to select a station upward or downward
respectively.
Automatic Tuning: Press and hold ( 10) button for more than 3 seconds, the radio automatically
searches a station upward or downward respectively and plays when it find a station.
7
LOC/ DX SELECTOR
Press (11) button to select strong or weak station reception.
It is set to LOC mode when (11) button is first pressed."LOC" appears and only local station is
available.
It is switched to DX mode when (11) button is pressed again. Both distance and local stations
can be received.
NOTE: (1) The initial mode is DX mode, No “DX" appears in LCD
(2) LOC is functional only is selecting stations.
LOUDNESS ON/OFF
Press LOU (22) button to increase the low frequency. This can improve the sensitivity of your
ears. And ‘’LOUD’’ appears in the LCD when the loudness mode is activated.
MO/ ST Selector
In FM mode, Press (12) button to select MONO or STEREO mode.
When “ST" and (**) appears in the LCD display. It is “STEREO" mode.
It is switch to MONO mode when “ST" disappears only.
During the player mode, press the button to switch left speaker/ right speaker/ stereo.
Scanning/Memorizing Stations Automatically
Press (13) button to scan each stored station for 5 seconds respectively which stored in (14)
(1~ 6) number buttons. When AMS mode is carrying out. “INT" appears on display. You also can
press the corresponding number button or AMS button when your desired station is changed. It
starts playing that station.
Press and hold (13) button for more than 3 seconds to activate automatically memory storing
function. The radio automatically selects a station and has it stored in any one of the number
button (14) (1~ 6).
NOTE: The unit can be stored up to 6 stations for each band. Regarding the function of number
button, refer to (14) number buttons for details.
DVD, MPEG4, VCD, MP3, WMA, CD OPERATION
While listening to ( or watching) DVD, MPEG4, VCD, MP3, WMA and CD, just insert a Disc (with
labeled side up) into the disc slot (16), the mechanism will automatically switch on. While it is
Radio /AUX mode and a Disc was loaded, press (7) button to play the Disc.
If an ID3 disc is playing. The songs name, artist name and file name will shufft show on LCD.
DVD, MPEG4, VCD, MP3, WMA, CD OPERATION
8
Selecting Tracks/ FW. / RW
Press (10) to choose your favorite track upward or downward respectively. Pres and hold (10)
button to fast forward or rewind the track upward or downward respectively.
Playing Tracks Repeatly
Press (14) “3RPT" button to perform repeat playing function when you need to repeat playing
the track you like.
Press “3RPT" button for the first time, it will repeat playing the same track for CD, VCD, MP3
and WMA or same chapter for DVD mode."RPT1" appears on LCD.
Press “3RPT" button for the second time, entire Disc will be playing repeatly for VCD and CD
playing. entire Title will be playing repeatly for DVD playing, the entire directory for MP3 and
WMA playing “RPT All" appears on the LCD display.
Press “3RPT" button for the third time to stop repeat mode for CD, VCD and DVD playing mode,
repeat entire disc for MP3and WMA playing mode.
Press “3RPT" button for the forth, time to stop repeat mode for MP3 and WMA playing mode.
Scanning Track Automatically
During CD playback, press “2INT" button, to play the first 10 seconds of each track on the disc,
the display will show “INT”, track number and elapsed time.
Which indicates INT function is already activated.
Press “2INT" button once again to return to normal playback.
NOTE: INT doesn’t' work during playing DVD/MP3/WMA
Playing Tracks in Random Order
During playback, press “4RDM" button, and "RDM" appears on the display, which indicates
RDM function is carried out. The unit plays any track at random. Press RDM once again to return
to normal playback mode.
Stop Playing
During playback, press (14) "STOP" button to stop the playback, LCD will show "STOP"
MARK stops running .To return to normal play mode, press 1 button again.
Pause the Playback
During playback, press (14) “1PLAY" button to suspend the playback mark stops on the
LCD display and show "PAUSE" To return to normal play node, press it again, and
Eject a Disc
During Eject button (15) to eject disc, "OPEN" will appear on LCD display.
DVD, MPEG4, VCD, MP3, WMA, CD OPERATION
9
BLUETOOTH
10
PAIRING CONNECT
Turn on car unit, put your mobile near the unit, and activate your mobile Bluetooth function. Soon
the phone will find the new Bluetooth device "CAR AUDIO”.
Input the pairing password “8888” and click OK. The phone will prompt the matching success-
ful. When the pairing connect is successful, on the LCD, it shows BT ON, and the Bluetooth logo
will stop blinking .Then you may perform the Bluetooth operation.
REMARK: depend on Bluetooth mobile, the Bluetooth system support “HSP” “HFP” “A2DP” and
AVRCP Bluetooth profile.
Handsfree phone service
If your mobile phone has matched with the unit, you can dial calls out through your mobile
phone. It will turn to unit automatically when calling come in and the calling phone number will
indicate on the LCD screen.
-Press the “BAND” button shortly to accept the call .Then you can talk with the other party
through the mic on the panel.
-Press “MUTE” button shortly to reject the call when calling come in.
-Press “MUTE” button shortly to hang up after you finish the talk.
Advance Audio distributing profile (A2DP) playing.
Through mobile and unit A2DP connected, the music playing in mobile can turn to the unit audio
system play. Press button and in the panel can select the music track.
-Press “ ” button shortly to pause the music playing.
-Press “BAND” (mode) longly to temporarily disconnect the Bluetooth.
-Press “BAND” (mode) button longly again to reconnect the Bluetooth.
-Press “ ” button shortly to pause the music playing.
-Press “BAND” (mode) longly to temporarily disconnect the Bluetooth.
-Press “BAND” (mode) button longly again to reconnect the Bluetooth.
Phone number book.
This Bluetooth system can automatically store incoming call numbers, up to 10 phone numbers.
-Press “MUTE” (mode) button longly to enter the phone number book and press VOL button to
look up the phone number.
-Press “BAND” button once can call out you desired phone number.
Interrupt Bluetooth connection/reconnection.
Pressing the “BAND” button shortly to interrupt the Bluetooth connection when you are talking a
call and the voice can turn to mobile speaker.
Press “BAND” button again to reconnection.
NOTE: Different mobile phone has different responses. We do not guarantee all the operation of
connectable devices.
How to delete stored phone number?
The unit can store ten number of missed, rejected and ANS separately,
and the first number will auto deleted when the 11th number calling
How to use “Missed”, Rejected” Auto ANS” Functions.
Press MUTE button for 3 seconds to enter into RECEIVED /MISSED/REJECTED/ AUTO .ANS .Turn
VOL button for choosing the telephone number.
Inhaltsverzeichnis
Sprachen:
