Baby Jogger city mini GT Bedienungsanleitung
Read these instructions carefully
before use and keep them for
future reference. Your child’s
safety may be affected if you do
not follow these instructions.
www.babyjogger.com
CITY MINI GT
ASSEMBLY INSTRUCTIONS
This product complies with
BS EN 1888:2003 inc. A1,2,3: 2005
2
• This stroller is suitable from birth to 15kg [33lb].
• This stroller is tested to 15kg [33lb] in accordance with BS EN 1888:2003.
• WARNING: It may be dangerous to leave your child unattended.
• WARNING: Watch out for cars – never assume that a driver can see you and your child.
• WARNING: If your buggy is to be used by someone unfamiliar with it, e.g. grandparents,
then show them how it works before letting them use it.
• WARNING: DO NOT exceed 3mph (normal walking speed). This stroller is not suitable for
running, jogging, skating or roller blading.
• WARNING: Prevent serious injury to your child by always using the safety harness. Child
may slip into leg openings and strangle if harness is not properly fastened. Never use in
reclined carriage position unless safety harness is properly fastened - SEE ‘Safety Harness’
PAGE 7.
• WARNING: Parcels, accessories and other items (E.g. handbags, shopping bags etc.) that
are placed on the stroller handlebars may cause the unit to become unstable.
• WARNING: Excessive weight may cause a hazardous unstable condition to exist. Do not
put heavy items (more than 1kg [4lb]) in the seat pocket. The basket weight must not
exceed 2kg [8lb]. (Combined passenger and baggage max. total weight 15 kg [33lb]).
• WARNING: Check that any accessories are attached correctly before use.
• WARNING: Never leave raincovers, hoods and aprons on indoors or in a hot atmosphere.
• WARNING: Ensure that children are clear of moving parts before making adjustments.
• WARNING: Do not allow children to play with the stroller.
For the sake of your precious cargo, please
read these warnings before using your stroller.
WARNING:
1
• WARNING: Taking children up or down stairs, steps, escalators, steep slopes and muddy/
rough terrain in a stroller could be dangerous and should not be attempted. Damage
resulting to stroller will not be covered under warranty. Remove your child from the stroller
and fold it up for easy carrying to negotiate such hazards, or simply avoid them.
• WARNING: The passenger must remain seated (no standing in the stroller).
• WARNING: Do not use stroller in high winds, lightening or stormy weather.
• WARNING: Ensure all locking devices are engaged before use.
• WARNING: Do not let go of the stroller unless it is in a safe location (away from high
winds, traffic, trains, steps/slopes etc.) with the brakes on.
• WARNING: Hold on to your stroller when close to moving vehicles and trains as the
draught from the vehicles may move the stroller even with the brakes on.
• WARNING: Do not carry or lift the stroller while open or with a child in it.
• Only use parts and accessories which are approved by the manufacturer or distributor.
Non-approved parts and accessories may be unsafe and must not be used and will
invalidate warranty.
• This stroller seats one passenger.
WARNING:
2
1 Unpack stroller from box and set
wheels aside.
3 Turn stroller over to upright position.
2 Begin to unfold stroller by pulling the Auto-lock lever
while pushing the handle up and away from the lower
frame. The stroller will click into place.
4 Snap red safety strap to frame under the fold
mechanism before use.
FRAME
Warning: Ensure all locking devices are engaged
before use.
3
1 To install front wheel, lay stroller back so the handle is resting on floor.
2 Attach the front wheel by sliding the axle into the wheel end until it clicks.
Gently tug on wheel to make sure the front wheel is locked into place.
Swivel/Straight Feature
• Press the lever down to allow the front wheel assembly to swivel.
• Raise the lever up to lock the front wheel assembly in the straight position for long distance strolling.
NOTE: • When loading and unloading child, always press the lever down to lock the front wheel straight.
• Although the front wheel of your City Mini GT locks it is not intended for jogging or exercise purposes.
FRONT WHEEL
CLICK
4
1 Align wheel axle with wheel mount on stroller frame.
2 Insert the wheel axle into the wheel mount until it clicks into place.
Gently tug on wheel to make sure the rear wheel is properly attached.
REAR WHEELS
To install rear wheels:
1 Press the wheel release button while gently sliding the wheel
away from the wheel mount.
To remove the rear wheels:
5
2 To remove the canopy, stand
facing the stroller and press
the grey release button while
pulling up on the canopy
bracket. Repeat on opposite
side to remove entire canopy
from stroller.
1 To attach canopy to frame, simply
slide canopy peg into the top hole
of the universal mounting bracket,
until you hear it click into place.
The bottom hole can be used
to attach Baby Jogger acessories
to your stroller.
CANOPY
6
6
BRAKE
To engage parking brake: Gently pull brake lever into upright position
until it clicks into place.
To release parking brake: Pinch gray tabs and pull towards you. Push brake lever down until it is parallel with
the frame.
Warning: Engage parking device before loading and unloading passenger.
7
1 Unclip top of shoulder strap
from the seat and re-clip on
the pair of seat loops closest
to child’s shoulder height.
1 Pull shoulder pads down close to main harness buckle.
2Hold the plastic guide and pull the strap end to tighten
or pull the upper harness strap to loosen.
3 Fasten both shoulder strap buckles
into the crotch strap buckle. The
buckles should always be clicked
into place before use.
SAFETY HARNESS
To adjust harness height: To adjust harness length:
Warning:
Always use the
crotch strap in
combination with
the shoulder straps
and waist belt.
To buckle: To unbuckle:
4 Press both sides of the
shoulder buckles to
release them from the
crotch buckle.
Warning:
Avoid serious
injury from falling
or sliding out.
Always properly
adjust and fasten
safety harness.
NOTE: If you have special harness requirements and wish to attach
your own harness, then there are D rings provided on the
waist harness for the attachment of your alternative harness
system. The alternative harness system must conform to
BS EN 13210:2004.
8
1 Pinch the clamp behind the seat, and slide it down to desired
recline. Pull seat down on both sides to match recline position
of clamp.Reverse steps to return to the upright position.
Weather Cover: If desired, pull
weather cover down and over
the seat back mesh. Secure
firmly over both sides of seat.
When not in use, roll weather
cover up and fasten with elastic
loop and barrel provided under
top of the canopy fabric.
RECLINING SEAT
To recline:
Andere Handbücher für city mini GT
4
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Baby Jogger Kinderwagen Handbücher
Baby Jogger
Baby Jogger CITY MINI 2 Bedienungsanleitung
Baby Jogger
Baby Jogger City Mini Single Bedienungsanleitung
Baby Jogger
Baby Jogger CITY ELITE SINGLE Bedienungsanleitung
Baby Jogger
Baby Jogger SUMMIT X3 Bedienungsanleitung
Baby Jogger
Baby Jogger city select LUX Bedienungsanleitung
Baby Jogger
Baby Jogger ASTM F833-07A Bedienungsanleitung
Baby Jogger
Baby Jogger CITY MINI GT 2 Bedienungsanleitung
Baby Jogger
Baby Jogger PERFORMANCE DOUBLE Bedienungsanleitung
Baby Jogger
Baby Jogger City Elite 2 Bedienungsanleitung
Baby Jogger
Baby Jogger City Tour Bedienungsanleitung
Baby Jogger
Baby Jogger City Tour Lux Bedienungsanleitung
Baby Jogger
Baby Jogger CITY MINI GT 2 Bedienungsanleitung
Baby Jogger
Baby Jogger city select LUX Bedienungsanleitung
Baby Jogger
Baby Jogger City Mini Zip Bedienungsanleitung
Baby Jogger
Baby Jogger City Mini Single Bedienungsanleitung
Baby Jogger
Baby Jogger CITY SELECT 2 Bedienungsanleitung
Baby Jogger
Baby Jogger City tour 2 Bedienungsanleitung
Baby Jogger
Baby Jogger DELUXE PRAM Bedienungsanleitung
Baby Jogger
Baby Jogger City Select Lux Bedienungsanleitung
Baby Jogger
Baby Jogger CITY MINI double Bedienungsanleitung
