Baby Trend Sit N' Stand Snap Gear SS88 Bedienungsanleitung

SS88

Sit N’ Stand®Snap Gear™ Double Stroller

Instruction Manual

Manual de Instrucciones

Manuel d’instructions

WARRANTY

DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACT BABY TREND

FOR REPLACEMENT PARTS, SERVICE AND REPAIR.

The Baby Trend® warranty covers workmanship defects within the rst 180 days of

purchase. Any product which has been subjected to misuse, abuse, abnormal use,

excessive wear and tear, improper assembly, negligence, environmental exposure, alteration

or accident, or has had its serial number altered or removed invalidates all claims against

the manufacturer. Any damage to property during installation is the sole responsibility of the

end user. The Customer Service Department can be contacted at 1 (800) 328-7363 Monday

through Friday between 8:00am and 4:30pm (PST). Return Authorizations are required prior

to returning product(s) to Baby Trend®. Warranty only valid in North America.

GARANTIA

NO DEVUELVA SU PRODUCTO A LA TIENDA. POR FAVOR CONTACTE A BABY TREND

PARA PIEZAS DE REPUESTO, SERVICIO Y REPARACION.

La garantía de Baby Trend® cubre defectos de fábrica dentro de los primeros 180 días de

la compra.Cualquier producto que haya sido sometido a uso indebido, abuso, uso anormal,

desgaste excesivo, montaje incorrecto, negligencia, exposición ambiental, alteración o

accidente, o que ha tenido su número de serie alterado o removido anula todos los reclamos

contra el fabricante. Cualquier daño a la propiedad durante la instalación es de la exclusiva

responsabilidad del usuario nal. El Departamento de Servicio al Cliente puede ser

contactado a 1 (800) 328-7363 Lunes a viernes entre 8:00am y 4:30pm (PST).Un numero

de autorizacion es requerido antes de la devolución de los producto(s) a Baby Trend®.

Garantia válida sólo en América del Norte.

GARANTIE

NE PAS RETOURNER VOTRE PRODUIT AU MAGASIN. VEUILLEZ CONTACTER BABY

TREND POUR DES PIÈCES DE RECHANGE, ENTRETIEN ET RÉPARATION.

La garantie Baby Trend® couvre les vices de fabrication dans les 180 jours suivant l'achat du

produit. Tout produit qui a été soumis à un usage abusif, une utilisation anormale, une usure

excessive, un montage incorrect, de la négligence, de l'exposition environnementale, de la

modication ou un accident, ou a eu son numéro de série modié ou supprimé annule toutes

les réclamations contre le fabricant. Tout dommage à la propriété lors de l'installation est de

la seule responsabilité de l'utilisateur nal. Le service client peut être contacté au 1 (800)

328-7363 du lundi au vendredi 8 h – 16 h 30 (PST). Une autorisation sera nécessaire avant

de retourner le produit à Baby Trend®. Garantie valable uniquement en Amérique du Nord.

1-800-328-7363

(8:00am ~ 4:30pm PST)

www.babytrend.com

Baby Trend, Inc.

1607 S. Campus Ave.,

Ontario, CA 91761

www.babytrend.com

SS88xxx_3L_071816

Read all instructions BEFORE assembly and USE of product.

KEEP INSTRUCTIONS FOR FUTURE USE.

Lea todas las instrucciones ANTES de armar y USAR el producto.

CONSERVE LAS INSTRUCCIONES PARA USO FUTURO.

Lisez toutes les instructions du manuel AVANT l’assemblage

ou L’UTILISATION de ce produit. CONSERVEZ CES

INSTRUCTIONS POUR RÉFÉRENCE ULTÉRIEURE.

www.babytrend.com

WARNING

Table of Contents Índice Table des Matières

English 2

Warning 2

Parts 3

Information 4

Assembly 5

Safety 8

Operation 10

Maintenance 13

Espanol 14

Advertencia 14

Piezas 15

Información 16

Montaje 17

Seguridad 20

Funcionamiento 22

Mantenimiento 25

Français 26

Avertissement 26

Pièces 27

Informations 28

Assemblage 29

Sécurité 32

Utilisation 34

Entretien 38

WARNING: Please follow all of these

instructions to ensure the safety of your child. Keep

these instructions for future reference.

WARNING: Failure to follow these instructions

could result in serious injury or death. Avoid serious

injury from falling or sliding out, always use the safety

harness and ensure that the children are properly

positioned according to these instructions.

WARNING: Never leave children unattended.

WARNING: Care must be taken when folding

and unfolding the stroller to prevent nger entrapment.

• ONLY approved Snap Tech™ products can be used on the frame.

•

Purses, shopping bags, parcels, diaper bags or accessory items may change

the balance of the stroller and cause a hazardous, unstable condition.

•

The maximum weight that can be carried in the storage basket is 5 lbs (2.26

kg).Excessive weight may cause a hazardous unstable condition to exist.

• Be certain the stroller is completely opened and locked in place before

allowing a child near the stroller.

• The maximum weight for the Toddler seats are 40 lbs (18.14 kg) each.

The maximum weight for the platform/jumpseat is 50 lbs (22.67 kg).

• The Joy Ride Platform / jump seat is designed for a child who is at least 2

1/2 years old and is not over 40 inches (101.6 cm) tall. Children totaling

more than 90 pounds (40.82 kg), will cause excessive wear and stress on

the stroller and may cause a hazardous unstable condition to exist.

• NEVER use the stroller on stairways or escalators.

• NEVER allow your stroller to be used as a toy.

• To clean use only mild household soap or detergent and warm water on a

sponge or clean cloth.

• Check your stroller for loose screws, worn parts, torn material or stitching

on a regular basis. Replace or repair parts as needed.

• Discontinue use of stroller should it malfunction or become damaged.

Please contact our customer service department to arrange for repair or

obtain replacement parts.

INFORMATION

PARTS

Stroller Seats (2)

Front Wheels

Bumper Bars (2)Canopies (2)

Check that you have all the parts for this model

before assembling the stroller.

Rear Wheels Removable

Joy Ride Platform

RIDING POSITIONS

• ONLY approved Snap Tech™ products can be used on the frame.

ASSEMBLY

Remove stroller from box. The front and rear

wheels MUST be installed prior to use.

FRONT WHEELS

To attach the front wheels, unfold stroller as

described in the following section:

1) • Unlock the release lever (Fig. 1a) and

unfold stroller frame by pulling upward

on the stroller handle until the frame

locks (Fig. 1b).

• Lean the stroller backwards and push

each front wheel assembly into the front

wheel housing until they lock into place

(Fig. 1c).

NOTE: Pull on the wheel assembly

to ensure that it is securely attached

to the stroller.

IMPORTANT! To ensure safe operation of your

stroller, please follow these instructions carefully. Please

keep these instructions for future reference.

IMPORTANT! Before assembly and each use,

inspect this product for damaged hardware, loose joints,

missing parts or sharp edges. NEVER use if any parts are

missing or broken.

IMPORTANT!Adult assembly is required.

Fig. 1a

Fig. 1b

Fig. 1c

REAR WHEELS

2) • Press the rear wheel posts into the rear

frame hub until it clicks into place (Fig. 2).

NOTE: Pull on the rear wheels to ensure

that it is securely attached to the stroller.

BUMPER BAR

WARNING: Do not

use bumper bar to carry seat

with child inside. The bumper

bar is not a carrying handle.

3) • Attach the bumper bar by lining up

anchors with the slots on the seat. Push

until it locks into place (Fig. 3a).

NOTE: The bumper bar must be securely

attached before using this product.

• To detach bumper bar, press the release

button on the bottom of the bar and pull

bar out of the anchor. Swing the bar

upwards to access the seat (Fig. 3b).

Fig. 2

Fig. 3b

Fig. 3a

SAFETY

ASSEMBLY

ATTATCHING THE SEAT

• ONLY approved Snap Tech™ products can

be used on the frame.

4) • Attach the seat by lining up the seat

anchors on the side of the seat with the

anchors on the stroller frame and pushing

them together until they lock securely

(Fig. 4). The seat can face in either

direction, frontward or backward.

• To take off the seat or the infant car

seat, push both release buttons on each

side of the seat anchors and lift the seat

upwards.

DO NOT remove with child in the seat.

TO ADJUST SEAT

5) • The seats can be adjusted into upright

and reclined positions. Pull the recline

button on the rear of the seat and rotate

the seat into the desired position (Fig. 5).

REMOVABLE CANOPY

6) • To attach the removable canopy: Line

up the posts on the canopy clips with the

holes on the toddler seat tubes. Attach

the canopy to the seat frame using the

hook and loop fasteners (Fig. 6a).

• Push or pull on the front edge of the

canopy while holding the rear of canopy

in place to open and close (Fig. 6b).

Fig. 5

BRAKES

WARNING:Always set brakes when the

stroller is not being pushed so that the stroller will not

roll away. NEVER leave stroller unattended on a hill or

incline as the stroller may slide down the hill.

Fig. 6b

Fig. 6a

Fig. 7

Fig. 4

7) • To engage brakes, apply downward

pressure to the brake levers located on

the rear axle. The stroller might need to

be rolled back and forth to fully engage

the brake (Fig. 7).

NOTE: Check that the stroller will not

move once the brakes are properly

applied.

• To release, gently lift up on the brake

levers.

TO SECURE THE CHILD

WARNING:Avoid serious injury from falling or

sliding out. Always use the safety harness.

STRANGULATION HAZARD:

Child can strangle in loose straps. Never leave child in

seat when straps are loose or undone.

8) • The shoulder straps of the 5-point

harness have 3 attachment positions.

Select the position that places the

shoulder strap level with, or below, the

top of the child’s shoulders (Fig. 8a).

To adjust harness height unhook the

shoulder strap from the crotch buckle.

Feed the shoulder strap through the

harness spread slots. You can access

these slots from the rear of the seat

underneath the fabric. Feed shoulder

strap through the appropriate slot

and reattach the shoulder strap to the

crotch buckle.

Fig. 8a

OPERATION

SAFETY

• Carefully place the child in the stroller

seat and bring the safety harness around

the child’s waist and over the child’s

shoulders. Place the crotch strap between

the child’s legs. Insert the male end of

each shoulder/waist belt into the buckle on

the crotch strap. Tighten the harness so it

is snug around the child’s waist and over

the child’s shoulders (Fig. 8b).

TO RELEASE THE CHILD

9) • To release, push the button on center

clasp and the two harness buckles will

pop free (Fig. 9).

SIT N' STAND®

WARNING: The rear

platform and jump seat are

designed to accommodate

a child who is at least 2 1/2

years old, has good balance

and coordination, and is not

over 40 inches tall.

10) • Attach the Joy Ride Platform: Pull the

locks back on the platform and attach it

to the rear tube of the frame (Fig. 10a).

When the platform is not in use, remove

platform or rotate it upwards and secure

it to the basket with the snap.

NOTE: Make sure the platform locks

onto the frame before use.

• Jump Seat: Always use the 3-point

harness while in the seated position

facing the stroller handle. Put the seat

belt around the child’s waist and buckle

to the crotch strap (Fig. 10b). Adjust the

seat belt to be snug around the child’s

waist.

• Standing: Your child can stand on

the riding platform facing forwards or

backwards.

NOTE: Use caution while standing on

the platform. Make sure your child is

always holding onto the frame while

riding.

Fig. 8b

Adjust for a snug t

Fig. 9

Fig. 10b

Fig. 10a

Center Clasp

OPERATION

TO FOLD STROLLER

WARNING: Care

must be taken when folding

and unfolding the stroller to

prevent nger entrapment.

CAUTION: Do not

allow children near stroller

while folding.

11) • Pull the stroller backwards several

inches to adjust the front wheels to

the front.

• Fold the stroller by pulling both release

triggers (Fig. 11a) and push handle

down. Make sure the front wheels

lie at, then secure the stroller in the

folded position by locking the fold latch,

located on the right side of the stroller,

over the tab (Fig. 11b).

TO UNFOLD STROLLER

CAUTION: Do not

allow children near stroller

while unfolding.

12) • Unlock the release lever (Fig. 12a) and

unfold stroller frame by pulling upward

on the stroller handle until the frame

locks (Fig. 12b).

INFANT CAR SEAT

WARNING:Avoid

serious injury from falling or

sliding out, always use the

Infant Car Seat harness.

• ONLY approved Snap Tech™ products can

be used on the frame.

13) • Attach the car seat by lining up the seat

anchors on the side of the car seat

with the anchors on the stroller frame

and push them together until they lock

securely (Fig. 13a).

• To take off the seat or the infant car

seat, push both release buttons on

each side of the seat anchors and lift

the seat upwards (Fig. 13b).

DO NOT remove with child in the seat.

Fig. 13a

Fig. 13b

Fig. 12a

Fig. 12b

Fig. 11a

Fig. 11b

ADVERTENCIA

MAINTENANCE

SEAT PAD

• To clean the seat pad, use only mild household soap or detergent and warm

water on a sponge or clean cloth.

OTHER

• Check your stroller for loose screws, worn parts, torn material or stitching on

a regular basis. Replace or repair parts as needed.

ADVERTENCIA: Por favor, siga todas estas

instrucciones para garantizar la seguridad de su hijo.

Conserve estas instrucciones para referencia futura.

ADVERTENCIA: El incumplimiento de estas

instrucciones podría ocasionar una lesión grave o la

muerte. Evite lesiones graves por caídas o resbalones.

Siempre use el arnés de seguridad y asegúrese de que

los niños estén ubicados correctamente de acuerdo a

estas instrucciones.

ADVERTENCIA: Nunca pierda de vista a los

niños.

ADVERTENCIA: Se debe ser prudente al

plegar y desplegar el carrito para evitar que queden

dedos atrapados.

• Aprobado SOLAMENTE Snap Tech™ productos pueden ser utilizados en el

armazón.

• Los bolsos, bolsas de compras, paquetes, bolsas de pañales o artículos

accesorios podrían cambiar el equilibrio del carrito y una condición de

inestabilidad peligrosa.

• El peso máximo que se puede llevar es de 5 libras (2.26 kg) en la canasta de

almacenamiento y de 3 libras (1.36 kg). El exceso de peso podría ocasionar

una inestabilidad peligrosa.

• Procure que el carrito esté completamente abierto y bien trabado antes de

permitir que un niño se acerque al mismo.

• El peso máximo para las sillitas para niños pequeños es 40 lbs (18,14 kg)

cada una. El peso máximo para la plataforma/asiento adicional es 50 lbs

(22,67 kg).

• La platforma trasera en el asiento / plataforma de salto ha sido diseñado

para un niño que es por lo menos 2 1/2 años de edad y no tiene más de 40

pulgadas (101.6 cm) de altura. Niños por un total de más de 90 libras (40.82

kg), causarán desgaste y tensión excesiva en el cochecito y pueden crear

una condición peligrosa.

• NUNCA use el carrito en escaleras mecánicas o comunes.

• NUNCA permita el uso de su carrito como un juguete.

• Para limpiarlo, use solamente jabón doméstico o detergente suaves y agua

tibia en una esponja o trapo limpio.

• Verique con frecuencia que su carrito no tenga tornillos sueltos, piezas

gastadas, materiales o costuras rasgados. Reemplace o repare las piezas

conforme sea necesario.

• Deje de usar el carrito si presenta fallas o daños. Por favor, comuníquese

con nuestro departamento de servicio al cliente para gestionar la reparación

u obtención de piezas de reemplazo.

INFORMACIÓN

PIEZAS

Verique que tenga todas las piezas para este modelo

antes de montar el carrito.

POSICIONES DIFERENTES PARA PASEAR

• Aprobado SOLAMENTE Snap Tech™ productos pueden ser utilizados en el

armazón.

Carrito Sillitas (2)

Rueda delantera

Barra frontal (2)Cubierta (2)

Ruedas traseras Plataforma Joy Ride

MONTAJE

Retire el carrito de la caja. Antes del uso SE

DEBEN instalar las ruedas delanteras, las

ruedas traseras.

RUEDAS DELANTERAS

To attach the front wheels, unfold stroller as

described in the following section:

1) • Destrabe la palanca de liberación

(Fig. 1a). Despliegue el armazón del

cochecito tirando hacia arriba del

manubrio (Fig. 1b). La barra se trabará

cuando las patas estén completamente

extendidas.

• Incline el carrito hacia atrás y empuje

cada montaje de la rueda delantera

hacia la arandela de la rueda delantera

hasta que se traben (Fig. 1c).

NOTA: Tire del montaje de la rueda

para cerciorarse de que esté sujeto de

manera segura al carrito.

REAR WHEELS

2) • Presione los postes de la rueda trasera

dentro de los cubos del armazón trasero

hasta que encajen (Fig. 2).

NOTA: Tire del montaje de la rueda para

cerciorarse de que esté sujeto de manera

segura al carrito.

LA BARRA FRONTAL

ADVERTENCIA:

No use la barra frontal

para trasladar la sillita para

estando el niño adentro.

La barra frontal no es una

manija de traslado.

3) • Coloque la barra frontal alineando los

anclajes con las ranuras de la sillita.

Empuje hasta que encaje (Fig. 3a).

NOTA: la barra frontal debe estar sujeta

de manera segura antes de poder usar

el producto.

• Para sacar la barra frontal, presione el

botón de liberación que está en la parte

inferior de la barra y sáquela del ancla.

Mueva la barra hacia arriba para tener

acceso a la sillita (Fig. 3b).

¡IMPORTANTE! Para asegurar el

funcionamiento seguro de su carrito, siga estas

instrucciones cuidadosamente. Por favor, conserve estas

instrucciones para referencia futura.

¡IMPORTANTE!Antes del montaje y de cada

uso, inspeccione el producto para detectar daños en el

equipo, uniones sueltas, piezas faltantes o bordes losos.

NUNCA use el carrito con piezas faltantes o rotas.

¡IMPORTANTE! Se requiere el montaje por

parte de un adulto.

Fig. 1a

Fig. 1b

Fig. 1c

Fig. 2

Fig. 3b

Fig. 3a

Inhaltsverzeichnis

Sprachen:

Andere Baby Trend Kinderwagen Handbücher

Baby Trend

Baby Trend TS12 D Series Bedienungsanleitung

Baby Trend

Baby Trend 1st Debut TS86 Bedienungsanleitung

Baby Trend

Baby Trend Expedition Race Tec Plus Bedienungsanleitung

Baby Trend

Baby Trend Expedition 9199 Bedienungsanleitung

Baby Trend

Baby Trend JG95C Bedienungsanleitung

Baby Trend

Baby Trend Expedition Double Bedienungsanleitung

Baby Trend

Baby Trend Expedition ELX Bedienungsanleitung

Baby Trend

Baby Trend Sit N Stand D X Bedienungsanleitung

Baby Trend

Baby Trend Expedition LX Bedienungsanleitung

Baby Trend

Baby Trend Jetaway ST28C22B Bedienungsanleitung

Baby Trend

Baby Trend 1981CT Bedienungsanleitung

Baby Trend

Baby Trend TS88 Bedienungsanleitung

Baby Trend

Baby Trend MUV Tango Pro Travel TS04 M Series Bedienungsanleitung

Baby Trend

Baby Trend Simply Smart PY75 A Series Bedienungsanleitung

Baby Trend

Baby Trend WK14 C Series Bedienungsanleitung

Baby Trend

Baby Trend TJ79 Bedienungsanleitung

Baby Trend

Baby Trend StrideZ 1963CT Bedienungsanleitung

Baby Trend

Baby Trend Expedition CW01 Series Bedienungsanleitung

Baby Trend

Baby Trend Tango TS08 A Series Bedienungsanleitung

Baby Trend

Baby Trend Muv Tango Pro Travel Bedienungsanleitung

Baby Trend

Baby Trend ST88 B Series Bedienungsanleitung

Baby Trend

Baby Trend Quick Step JG94 M Series Bedienungsanleitung

Baby Trend

Baby Trend Tour WG01D22B Bedienungsanleitung

Baby Trend

Baby Trend Passport ST12 E Series Bedienungsanleitung

Beliebte Kinderwagen Handbücher anderer Marken

Hauck

Hauck Priya Trioset Bedienungsanleitung

CHILDHOME

CHILDHOME CWQDN Bedienungsanleitung

Dreamer Design

Dreamer Design Rebound GST Bedienungsanleitung

Britax

Britax STEELCRAFT AGILE Bedienungsanleitung

Graco

Graco 7427 Bedienungsanleitung

OBaby

OBaby Aura Bedienungsanleitung

Tutek

Tutek Tirso Bedienungsanleitung

Babify

Babify Dual Plus Bedienungsanleitung

Graco

Graco Stroller Bedienungsanleitung

Special Tomato

Special Tomato Jogger Bedienungsanleitung

Chicco

Chicco CORTINA TOGETHER TWO-PASSENGER STROLLER Bedienungsanleitung

Otto Bock

Otto Bock Kimba neo Bedienungsanleitung

Milly Mally

Milly Mally ROYAL Kurzanleitung

Hauck

Hauck DUETT 3 PRAM Bedienungsanleitung

BOB

BOB DUALLIE Bedienungsanleitung

Nuna

Nuna Pepp Bedienungsanleitung

Britax

Britax B2 Bedienungsanleitung

Graco

Graco VERB Bedienungsanleitung