BAFANG H400 Bedienungsanleitung

DEALER MANUAL FOR MOTOR

BF-DM-C-FM G311-D-EN November 2019

6.1 Introduction 

6.2 Specifications 3

6.2.1 Outline and geometric size 3

6.2.2 Surface 3

6.2.3 Storage Information 3

6.3 Drive Unit Installation 4

6.3.1 List of Tools to be used 4

6.3.2 Motor Installation 4

6.4 Maintenance 5

CONTENT

6 DEALER MANUAL FOR H400

(FM G311.250.D)

2BF-DM-C-FM G311-D-EN November 2019

6.1 INTRODUCTION

•Product Model

FM G311.250.D

•Scope

Applies only to electrically powered pedelecs

developed or licensed by Bafang. It is suitable

for city and trekking bikes, which have been

developed for road use. The engine is not

suitable for sport competitions.

•Identiﬁcation

The following graphic, is the identification

numbers of the product, which are shown on

the housing:

Note: Content in the label is important informa-

tion about this product. Please do not remove

the information from the motor.

DEALER MANUAL FOR MOTOR

BF-DM-C-FM G311-D-EN November 2019

6.2 SPECIFICATIONS

Motor model: FM G311.250.D

Rated power (W) 250

Rated voltage (V) 36 / 43

Waterproof IP65

Certiﬁcation CE-EMC

Outdoor Temperatures -20℃~45℃

6.2.1 Outline and geometric size

OLD: 100mm

Shaft length: 142mm

Motor cable length: L=250mm (Optional)

6.2.2 Surface

Shockproof black and silver coating

6.2.3 Storage Information

The pedelec should be stored in a ventilated dry room. Avoid storing the pedelec near strong magnetic

objects.

4BF-DM-C-FM G311-D-EN November 2019

6.3 DRIVE UNIT INSTALLATION

6.3.1 List of Tools to be used

Use of the Tools Tools

To fasten BC3/8 cap lock-nuts Open-end wrench

To fasten the screws on disk brake Internal hexagonal wrench

6.3.2 Motor Installation

1. First place the disc brake on to non-cable

side of the motor and tighten with six

M5*8 screws. insert the stop pin on to the

shaft.

2. Insert the motor into the frame.

3. Mount one 2mm washer on both sides of

the frame.

4. Fasten clockwise BC3/8 cap lock-nuts with

open-end wrench at both ends of the mo-

tor. Torque requirement: 30-36N.m.

DEALER MANUAL FOR MOTOR

BF-DM-C-FM G311-D-EN November 2019

6.4 MAINTENANCE

• Maintenance must be carried out by autho-

rized personnel with the correct equipment.

• Do not disassemble the motor.

• Do not use thinners or other solvents to

clean the components. Such substances can

damage the surfaces.

• Avoid water submerging, to keep the com-

ponents protected.

• Avoid using high-pressure cleaning jets.

• For prolonged storage, turn off the battery

and avoid storing near heat sources.

6BF-DM-C-FM G311-D-EN November 2019

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere BAFANG Motor Handbücher

BAFANG

BAFANG FM G320.250.R Bedienungsanleitung

BAFANG

BAFANG RM G370.250.DC Bedienungsanleitung

BAFANG

BAFANG M420 Bedienungsanleitung

BAFANG

BAFANG H600 Bedienungsanleitung

BAFANG

BAFANG MM G333.250.C Bedienungsanleitung

BAFANG

BAFANG FM G312.250.D Bedienungsanleitung

BAFANG

BAFANG M400 Bedienungsanleitung

BAFANG

BAFANG H550 Bedienungsanleitung

BAFANG

BAFANG H300 Bedienungsanleitung

BAFANG

BAFANG H610 Bedienungsanleitung

BAFANG

BAFANG M420 Bedienungsanleitung

BAFANG

BAFANG FM G370.250.V Bedienungsanleitung

BAFANG

BAFANG MM G510.750.C Bedienungsanleitung

BAFANG

BAFANG MAX Drive System Bedienungsanleitung

BAFANG

BAFANG RM G062.750.D Bedienungsanleitung

BAFANG

BAFANG H620 Bedienungsanleitung

BAFANG

BAFANG MM G532.250.C Bedienungsanleitung

Beliebte Motor Handbücher anderer Marken

Rotax

Rotax 125 senior MAX evo Bedienungsanleitung

Kohler

Kohler K361 Bedienungsanleitung

MTD

MTD OHV Series Bedienungsanleitung

Kohler

Kohler COMMAND CH18-745 Bedienungsanleitung

Mercury

Mercury D4.2L D-Tronic Bedienungsanleitung

Selve

Selve SE Plus-RC Series Bedienungsanleitung

Perkins

Perkins 1206E-E66TA Bedienungsanleitung

Skov

Skov DA 174 Handbuch

Rossi

Rossi TX11 Series Bedienungsanleitung

Siemens

Siemens SIMOTICS T-1FW3 Merkblatt

AL-KO

AL-KO PRO 350 Bedienungsanleitung

MTU

MTU 12 V 4000 Lx4 Bedienungsanleitung

Nanni

Nanni N3.30 Gebrauchsanweisung

Nanni

Nanni N5.160 CR2 Bedienungsanleitung

KSB

KSB SuPreme Series Montageanleitung

Hiwin

Hiwin EM1 Series Bedienungsanleitung

Rotax

Rotax 912 i series Betriebsanleitung

Siemens

Siemens SIMOTICS XP 1MB1 Bedienungsanleitung