Bahco BCL31D1 Bedienungsanleitung

12V – Cordless Mini Drill / Driver

BCL31D1

English.........................................Page 2

Suomi............................................ Sivu 11

Français................................Page 21

Español............................. Página 31

Dansk.............................................Side 41

Deutsch.................................. Seite 51

Nederlands..............Pagina 62

Svenska.............................. Sidan 72

Italiano.................................Pagina 82

Polski.......................................Strona 92

Русский

..................

Страница

102

Türkçe...................................Sayfa 113

Latviešu ....................Lappuse 122

Eesti .................................................... Lk 132

Lietuvių ....................................Psl. 142

Ελληνικά.......................Σελίδα 152

BCL31D1K1

+ +

• 2•

ENGLISH Original instructions

Model: BCL31D1

Cordless Mini Drill / Driver

OPERATING INSTRUCTIONS

WARNING ADVERTISSEMENT:

WEAR HEARING PROTECTION

AVOID PROLONGED

EXPOSURE TO VIBRATION

ALWAYS READ

INSTRUCTIONS BEFORE

USING POWER TOOLS

ALWAYS WEAR

SAFETY GLASSES

1. GENERAL POWER TOOL SAFETY WARNINGS

WARNING

Read all safety warnings and all instructions. Failure to follow the

warnings and instructions may result in electric shock, re and/or serious injury.

Save all warnings and instructions for future reference! The term “power

tool” in the warnings refers to your mains-operated (corded) power tool or battery-

operated (cordless) power tool.

1. Work area safety

a. Keep work area clean and well lit. Cluttered or dark areas invite accidents.

b. Do not operate power tools in explosive atmospheres, such as in

the presence of ammable liquids, gases or dust. Power tools create

sparks which may ignite the dust or fumes.

c. Keep children and bystanders away while operating a power tool.

Distractions can cause you to lose control.

2. Electrical safety

a. Power tool plugs must match the outlet. Never modify the plug in any

way. Do not use any adapter plugs with earthed (grounded) power

tools. Unmodied plugs and matching outlets will reduce risk of electric

shock.

b. Avoid body contact with earthed or grounded surfaces, such as

pipes, radiators, ranges and refrigerators. There is an increased risk of

electric shock if your body is earthed or grounded.

c. Do not expose power tools to rain or wet conditions. Water entering a

power tool will increase the risk of electric shock.

• 3•

d. Do not abuse the cord. Never use the cord for carrying, pulling or

unplugging the power tool. Keep cord away from heat, oil, sharp

edges or moving parts. Damaged or entangled cords increase the risk of

electric shock.

e. When operating a power tool outdoors, use an extension cord

suitable for outdoor use. Use of a cord suitable for outdoor use reduces

the risk of electric shock.

f. If operating a power tool in a damp location is unavoidable, use

a residual current device (RCD) protected supply. Use of an RCD

reduces the risk of electric shock.

g. Hold power tool by insulated gripping surfaces, when performing an

operation where the fastener may contact hidden wiring or its own

cord. Fasteners contacting a “live” wire may make exposed metal parts of

the power tool “live” and could give the operator an electric shock.

3. Personal safety

a. Stay alert, watch what you are doing and use common sense when

operating a power tool. Do not use a power tool while you are tired

or under the inuence of drugs, alcohol or medication. A moment

of inattention while operating power tools may result in serious personal

injury.

b. Use personal protective equipment. Always wear eye protection.

Protective equipment such as dust mask, non-skid safety shoes, hard hat,

or hearing protection used for appropriate conditions will reduce personal

injuries.

c. Prevent unintentional starting. Ensure the switch is in the off-position

before connecting to power source and/or battery pack, picking up

or carrying the tool. Carrying power tools with your nger on the switch

or energizing power tools that have the switch on invites accidents.

d. Remove any adjusting key or wrench before turning the power tool

on. A wrench or a key left attached to a rotating part of the power tool may

result in personal injury.

e. Do not overreach. Keep proper footing and balance at all times. This

enables better control of the power tool in unexpected situations.

f. Dress properly. Do not wear loose clothing or jewelers. Keep your

hair, clothing and gloves away from moving parts. Loose clothes,

jewelers or long hair can be caught in moving parts.

g. If devices are provided for the connection of dust extraction and

collection facilities, ensure these are connected and properly used.

Use of dust collection can reduce dust related hazards.

4. Power tool use and care

a. Do not force the power tool. Use the correct power tool for your

application. The correct power tool will do the job better and safer at the

rate for which it was designed.

• 4•

b. Do not use the power tool if the switch does not turn it on and off.

Any power tool that cannot be controlled with the switch is dangerous and

must be repaired.

c. Disconnect the plug from the power source and/or the battery pack

from the power tool before making any adjustments, changing

accessories, or storing power tools. Such preventive safety measures

reduce the risk of starting the power tool accidentally.

d. Store idle power tools out of the reach of children and do not allow

persons unfamiliar with the power tool or these instructions to

operate the power tool. Power tools are dangerous in the hands of

untrained users.

e. Maintain power tools. Check for misalignment or binding of moving

parts, breakage of parts and any other condition that may affect the

power tool’s operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly maintained power

tools.

f. Keep cutting tools sharp and clean. Properly maintained cutting tools

with sharp cutting edges are less likely to bind and are easier to control.

g. Use the power tool, accessories and tool bits etc. in accordance with

these instructions, taking into account the working conditions and

the work to be performed. Use of the power tool for operations different

from those intended could result in a hazardous situation.

5. Battery tool use and care

a. Recharge only with the charger specied by the manufacturer.

A charger that is suitable for one type of battery pack may create a risk of

re when used with another battery pack.

b. Use power tools only with specically designated battery packs.

Use of any other battery packs may create a risk of injury and re.

c. When battery pack is not in use, keep it away from other metal

objects, like paper clips, coins, keys, nails, screws or other small

metal objects that can make a connection from one terminal to

another. Shorting the battery terminals together may cause burns or a

re.

d. Under abusive conditions, liquid may be ejected from the battery;

avoid contact. If contact accidentally occurs, ush with water. If

liquid contacts eyes, additionally seek medical help. Liquid ejected

from the battery may cause irritation or burns.

6. Service

a. Have your power tool serviced by a qualied repair person using

only identical replacement parts. This will ensure that the safety of the

power tool is maintained.

• 5•

2. PRODUCT SAFETY INSTRUCTIONS

WARNING

1. To ensure the designed operational integrity of power tools, do not remove

installed cover or screws.

2. Use your tool at lower input than specied on the nameplate, otherwise, the

nish may be spoiled and working efciency reduced by motor overload.

3. Do not wipe plastic parts with solvent. Solvents such as gasoline, thinner,

benzene, carbon tetrachloride, alcohol, ammonia and oil containing chloric

annex may damage and crack plastic parts. Do not wipe them with such

solvent. Wipe plastic parts with a soft cloth lightly dampened with soap water.

4. Use clamps or other practical way to secure and support the work piece to a

stable platform. Holding the work by hand or against your body is unstable

and may lead to a loss of control.

5. Use only accessories that are recommended by the manufacturer for your

model. Accessories that may be suitable for one tool may create a risk of

injury when used on another tool.

3. IMPORTANT SAFETY INSTRUCTIONS FOR CHARGER & BATTERY PACK

WARNING

1. Caution: To reduce risk of injury, charge only specic type rechargeable

battery packs. Other types of battery packs may burst causing personal injury

and damage.

2. Before using charger, read all instructions and cautionary markings on battery

packs and chargers.

3. Do not expose charger to rain or snow.

4. To reduce the risk of damage to electric plug and cord, pull by plug rather than

cord when disconnecting charger.

5. Use of an attachment not recommended or sold by the charger manufacture

may result in a risk of re, electric shock, or injury to persons.

6. Make sure cord is located so that it will not be stepped on, tripped on, tripped

over, or otherwise subjected damage or stress.

7. Do not operate charger with damaged cord or plug. Replace them

immediately.

8. Do not operate charger if it has received a sharp blow, been dropped, or

otherwise damage in any way, take it to qualied center.

9. To reduce risk of electric shock, unplug charger from outlet before attempting

any maintenance or cleaning. Turning off controls will not reduce this risk.

10. Do not disassemble charger or battery pack, take it to a qualied service

center while repair is required. Incorrect reassembling may result in a risk of

electric shock or re.

• 6•

4. ADDITIONAL SAFETY RULES FOR CHARGER & BATTERY PACK

WARNING

1. Do not charge battery pack when temperature is below 0°C (32°F) or above

40°C (104°F).

2. Do not attempt to use a set-up transformer, an engine generator or DC power

receptacle.

3. Do not allow anything to cover or clog the charger vents.

4. Always cover the battery pack terminals with the battery pack cover when the

battery pack: is not used.

5. Do not short the battery pack.

6. Do not touch the terminals with any conductive material.

7. Avoid storing battery pack in a container with other metal objects such as

nails, coins, etc.

8. Do not expose battery pack to water or rain, A battery pack short can use

large current ow, overheating, possible burns and even a breakdown.

9. Do not store the machine and battery pack in locations where the temperature

may reach or exceed 50°C (122°F).

10. Do not incinerate the battery pack even if it is severely damaged or

completely worn out. The battery pack can explode in a re.

11. Be careful not drop, shake or strike battery pack.

12. Do not charge inside a box or container of any kind. The battery pack must

be placed in a well ventilated area during charging.

13. Do not leave batteries unused for extended period of time. Recharge the

battery every 3~6 months and bring Li-Ion battery to 40~80% charge level

before storage.

14. Li-Ion batteries are sensitive to high temperature and should be kept in a

cool, dry and out of direct light exposure. Ideal temperature for operation and

storage is below 25°C (77°F).

15. For extension of the battery lifetime, the lithium-ion battery is designed with

the protection function to stop the output.

In the case of described below, when using this product, even if you are

pulling the switch, the motor may stop.

This is not malfunction but the result of protection function.

•When the battery power remaining runs out, the motor stops.

•If the tool is overloaded, the motor may stop.

In this case, release the switch of tool and eliminate causes of

overloading. After that you can use it again.

•If the battery is overheated under overload work, the battery power may

stop. In this case stop using the battery and let the battery cool. After that

you can use it again.

16. This product is designed with low voltage protection, which prevents the tool

from over discharging and prolongs battery’s lifespan.

• 7•

5. SPECIFIC SAFETY RULES AND/OR SYMBOLS

.................... Recycle .................... Do not throw in Garbage

.................... Class II Tool .................. Indoor use only

..................

Do not incinerate and put the battery

on re ....................

Do not recharge if the battery is broken

or damaged

.................... Do not wet ................ Risk of electric shock

a.c.................. Alternating Current d.c. ............... Direct Current

W....................... Watts V........................ Volts

Hz .................... Hertz /min ............ Revolutions or Reciprocations per Minute

kg .................... Kilograms mm .............. Millimeter

kg-cm...... Kilograms - Centimeter ft-lb .............. Foot-Pound

6. FEATURE

1. Torque Adjustment Ring

2. Chuck

3. LED

4. Main Switch

5. High/Low Speed Rod

6. Side Panel

7. Forward/Reverse Rod

7. OPERATING INSTRUCTIONS

Removing or Installing Battery Pack

1. Always switch off the machine before insertion or removal of the

battery pack.

2. To remove the battery pack, push the button on the battery pack and

pull the tool unit from the battery pack in the direction.

3. To insert the battery pack, align the tool unit slides with the battery

pack sliding groove and push the tool unit into place.

The tool unit can be slide into battery pack in two directions.

4. Do not force the battery pack in sliding it into tool unit. If the battery

pack does not slide in easily, it is not being inserted correctly.

Charging the Battery Pack

1. Plug the fast charger into the power source.

2. Slide the battery pack into the charger as the arrow direction shown on the charger.

3. Push the battery pack into place and make sure the red light on the charger is “ON”. The

battery pack is now starting the charging cycle.

4. After nish the charging cycle, the light will turn into green. The battery pack is now ready

for use.

• 8•

5. Your new battery pack is not charged. You need to charge it before

use.

6. Always use the specied charger to charge the battery. When the

battery pack is inserted into the charger correctly, the red light will

come on and charging will begin.

7. When you charge a new battery pack or a battery pack which has not

been used for a long period, it may not accept a full charge. This is a

normal condition and does not indicate a problem. You can recharge

the battery pack fully after discharging it completely a couple of times.

8. Unplug the charger from the power source after nish the charge.

9. Please remove the battery from the unplugged charger for storage.

The LED Light on the Charger

Power On (Green light ashes slowly)

Battery Low (Red light stays illuminated)

Battery charged 80% (Green light ashes rapidly)

Battery charged 100% (Green light stays illuminated)

Battery Pack temperature is too hot or too cold (Red light ashes slowly)

Battery Pack malfunction (Red and Green lights stay illuminated)

Battery Pack LED Indication Function (Optional)

The Battery Pack has a “SW” button and 4-step green LEDs for indicating remaining capacity

status. The fuel gauge green LED will indicate when the “SW” button is momentarily pressed.

Remaining Capacity LED Indication RC Status

LED 1 (green) 0%-25%

LED 1, 2 (green) 26%-50%

LED 1, 2, 3 (green) 51%-75%

LED 1, 2, 3, 4 (green) 76%-100%

WARNING

1. Charger is plugged into a 100-240V a.c outlet only.

2. If the battery pack is too hot or too cold, the charger will not fast charge the battery pack

and the red Indicator light is “blinking”. When the battery pack temperature returns to

between 0°C (32°F) and 50°C (122°F), The charger will automatically begin charging.

3. If both red and green indicator lights are “ON” the battery pack either does not comply or is

defective. Please contact your retailer.

4. Do not charge the battery pack in the rain, snow or high temperature environment.

5. Do not charge battery pack when environment temperature is below 0°C (32°F) or above

40°C (104°F)

6. While charge the cool battery pack (below 0°C) in the warm indoor, keep the battery pack in

the room for one hour to warm up before starting the battery pack.

7. Remove the plug after nishing the charge.

8. The charger should be cooled at least one hour after continue charging three times.

9. Do not use generator for charging the battery pack.

• 9•

8. TOOL OPERATION

Attaching the Bits (Bits excluded)

1. Insert the bit into the hole of the driver shaft.

2. To remove the bit, pull it out from the bit holder.

9.5 mm (3/8”) - 11.5 mm (7/16”) 6.35 mm (1/4”)

Tool Operation

1. How to insert and remove bit:

To remove a bit from the chuck, hold the “B” part rmly by one hand and turn the “A” part by

counterclockwise.

To insert a bit into the chuck, hold the “B” part rmly by one hand and turn the “A”.

Select the speed by pushing

the High / Low Speed Rod

High Speed

(For drill)

Forward/Reverse Rod

Remove the bit

Turn clockwise

Low speed

(For screwdriver)

2. Forward / Reverse Rod selection button.

Select the forward or reverse direction of the tool by pushing the Forward / Reverse Rod.

High/Low speed selection:

– Use the “High” for drilling application.

– Use the “Low” form screwdriver application.

3. Select the applied torque.

Use the 10 sections adjustment ring to select the right torque you’re your application.

4. Drill model:

Select the torque ring to the sign for the maximum torque position if you would like to

make a drill on wood.

Replaceable Carbon Brush

1. Replace the new carbon brush, while the motor is not rotated and the carbon brush is run

out.

(Change the new motor after the carbon brush has been replaced 2~3 times).

2. How to replace carbon brush:

A. Use screwdriver to disassemble the screw from rear cover of the housing, then take out

carbon brushes from both right and left sides. (See Fig. 1)

Fig. 1

Fig. 2

Fig. 3

• 10 •

B. Replace two new carbon brushes to both right and left sides. (See Fig. 2, step 1)

•Please pay attention to the direction, the side with a round hole should be on the top.

•If the direction is incorrect, the carbon brush will get damaged when covering the rear

cover.

C. New carbon brushes are replaced well.

(See Fig. 3)

D. Use screwdriver to tighten the screw

from rear cover of the housing.

(See Fig. 2, step 2 & 3).

9. SPECIFICATIONS

Model...................................................................................................................................................................BCL31D1

Replaceable Carbon Brush Motor...................................................................................................................Yes

Voltage................................................................................................................................................................... 12V d.c.

No-Load Speed/min:

Low....................................................................................................................................... 0~360 /min (r.p.m.)

High..................................................................................................................................0~1,550 /min (r.p.m.)

Max Torque........................................................................................................245 kg-cm / 24 N.m / 17.6 ft-lb

Tool Weight ........................................................................................................................................................... 0.84 kg

Battery Weight ..................................................................................................................................................0.185 kg

Vibration..............................................................................................................................................................4.00 m/s²

Noise.........................................................................................................................................................................83.9 dB

Charging Time

BCL31C1:

12V - 2.0Ah..............................................................................................................35-40 minutes

Minutes Auto Cut-Off Charging Time (approximately)

The charging time may vary from the battery life and room temperature.

10. DISPOSAL

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT

IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.