BALANCE TIME 866465 Bedienungsanleitung
Item 866465
1. Features
1.1 Time - Alarm snooze function
- Perpetual Calendar Up to Year 2099
1.2 Temperature -Indoor measurable range:-9.9 °C ~ +50 °C
- Measures °C / °F user selectable
1.3 Humidity - Indoor measurable range: 20% ~99%
2. Unit Appearance
Part A-LCD
A1: Hour
A2: Minute
A3: Second
A4: Radio Controlled Icon
A5: Date
A6: Day of Week
A7: Temperature
A8: Humidity
Part B-Button
B1: “MODE/SET” Button
B2: “▼/Sec” Button
B3: “▲/ (DM)” Button
B4: “AL ON/OFF” button
B5: “ALARM MODE Slide key
B6: “SNOOZE” Button
Part C-Structure
C1: Hanging Hole
C2: Battery Door
C3: Stand
3. Getting Started:
Open battery Cover (C1)
Insert 4 x AA size batteries observing polarity [“ +” and “ –“ marks]
Replace battery compartment cover
Place the unit onto flat surface, or wall mounted by the hanging hole; the unit is
ready for use now.
4. Time and Alarm Setting
4.1 Radio Controlled Time:
After batteries inserted, the clock automatically starts to scan the DCF time
signal. Radio Control Icon“ ” flashes on the LCD.
(A4) flashes，
Indicating now is
receiving DCF signal
(A4) turns on,
Indicating signal
received successfully
(A4) disappear,
Indicating signal reception
failed
The clock automatically synchronized with the DCF radio signal every day at
2:00 & 3:00 a.m. to maintain accurate time keeping. If synchronization with the
DCF radio signal fails, “ ” on LCD disappear and the clock then attempts to
synchronize with the DCF radio signal at 4am, and 5 am.
The clock can be set to scan the radio signal manually by holding “▼” button (B2)
for 3 seconds. Each reception takes several minutes. If the DCF signal reception
fail, scanning stops (“ ” disappear on the LCD).
Stop scanning DCF radio signal by holding “▼” button (B2) for 3 seconds
4.2 Manual Time Setting:
In time display, hold “MODE/SET” button (B1) for 3 seconds to enter
Clock/Calendar setting Mode.
Press “▲” (B3) or “▼” (B2) button to adjust the setting and press “MODE/SET”
button (B1) to confirm each setting.
(By keeping the “▲” (B3) or “▼” (B2) button pressed, could accelerate the
process and reach the desired value more quickly)
The setting sequence is shown as follow: RCC ON/OFF, Time Zone, Hour, Minute,
Year, Month/Date Sequence, Month, Date, Language of Week, °C / °F(unit of
temperature setting)
There are 8 languages, English, German, French, Spanish, Italian, Dutch, Polish
and Czech, for day-of-week. The languages and their selected abbreviations for
each day of the week are shown in the following table.
Language
Sunday
Monday
Tuesday
Wednesda
y
Thursda
y
Friday
Saturda
y
English, ENG
SUN
MON
TUE
WED
THU
FRI
SAT
German, GER
SON
MON
DIE
MIT
DON
FRE
SAM
French, FRE
DIM
LUN
MAR
MER
JEU
VEN
SAM
Spanish, SPA
DOM
LUN
MAR
MIE
JUE
VIE
SAB
Italian, ITA
DOM
LUN
MAR
MER
GIO
VEN
SAB
Dutch, DUT
ZON
MAA
DIN
WOE
DON
VRI
ZAT
Poland, POL
NIE
PON
WTO
SRO
CZW
PIA
SOB
Czech, CZE
NED
PON
UTE
STR
CTV
PAT
SOB
Note:
(1) All setting modes will automatically exit in around 15 seconds without any
adjustment
(2) In time display mode, press “▼” button (B2) to select the display with or without
second.
(3) In time display mode, press “▲”button (B3) to select the month/date sequence,
and the selection would be confirmed in around 5 seconds without any adjustment.
(4) For Time Zone: If you receive no RC-DCF frequency signal, the time zone should
be set to 0. Time Zone is used in countries which can received the DCF frequency
signal but the time zone is different from German Time ( i.e. GMT+1).
4.3 Alarm Setting:
Press “MODE/SET” button select to view alarm time, “ALARM TIME” display on
the LCD.
When view alarm time, hold “MODE/SET” button (B1) for 3 seconds to set alarm
time, press “▲” (B3) or “▼” (B2) button to adjust the alarm time. Press
“MODE/SET” button (B1) to confirm the setting.
4.4 Snooze Alarm Function:
Press “AL ON/OFF” (B4) to activate alarm function. Alarm icon “appears on
the display. Press “AL ON/OFF” button (B4) again to deactivate alarm function,
alarm icon “ ” disappear from the display.
Slide “ALARM MODE” (B5) switch to select the day for alarm function. There are
three options: from Monday to Sunday, from Monday to Saturday, from Monday
to Friday.
Press “SNOOZE”(B6) button when alarm alerts. “ ” flashes on the LCD. The
alarm snoozes for around 4 minutes, then it alerts again. The snooze function
can be enabled for maximum 8 times.
When alarm alerts, except “SNOOZE” button, press any other buttons to stop
the alarm. Otherwise, the alarm signal sounds for about 2 minutes, then stops
automatically
5. Thermometer
The temperature measurement range is -9.9°C to +50°C. If the temperature is
out of the measurable range, LL.L (beyond the minimum temperature) or HH.H
(beyond the maximum temperature) will be shown on the LCD.
6. Hygrometer
The humidity measurement range is 20% to 99%. If the current humidity
measurement is lower than 20%, the LCD would display LL%, and it would
display 99% if the current humidity measurement is higher than 99%
7. Precautions
The clock loses its time information when the battery is removed.
Do not expose it to direct sunlight, heavy heat, cold, high humidity or wet areas
Never clean the device using abrasive or corrosive materials or products.
Abrasive cleaning agents may scratch plastic parts and corrode electronic
circuits
Andere BALANCE TIME Uhr Handbücher
BALANCE TIME
BALANCE TIME 112664 Bedienungsanleitung
BALANCE TIME
BALANCE TIME 862438 Bedienungsanleitung
BALANCE TIME
BALANCE TIME 406483 Bedienungsanleitung
BALANCE TIME
BALANCE TIME 396255 Bedienungsanleitung
BALANCE TIME
BALANCE TIME 866416 Bedienungsanleitung
BALANCE TIME
BALANCE TIME 372494 Montageanleitung
BALANCE TIME
BALANCE TIME 972483 Bedienungsanleitung
Beliebte Uhr Handbücher anderer Marken
Silicon Laboratories
Silicon Laboratories SI5324 Bedienungsanleitung
Heathkit
Heathkit GC-1005 Bedienungsanleitung
Oregon Scientific
Oregon Scientific PRYSMA RMR221P Bedienungsanleitung
Andrew O'Malley
Andrew O'Malley DOTKLOK Bedienungsanleitung
ALGE-Timing
ALGE-Timing ASC3 Bedienungsanleitung
Bodet
Bodet Profil 960 Bedienungsanleitung
Progetti
Progetti KALIMERO Handbuch
La Crosse Technology
La Crosse Technology WT-3141b Handbuch
La Crosse Technology
La Crosse Technology W86531 Bedienungsanleitung
Sharp
Sharp SPC900 Bedienungsanleitung
La Crosse Technology
La Crosse Technology 404-50447 Bedienungsanleitung
Datexx
Datexx DF0063 Bedienungsanleitung