USING THE SCREW-DOWN CROWN
Do NOT pull the crown unless it is UNSCREWED first:
NOTE: Failure to SECURELY screw down the crown after setting the watch
may affect its water resistance.
TO UNSCREW:
Turn the crown anti-clockwise until it turns freely
without tension. GENTLY pull the crown out to the
other desired positions for watch setting (see specific
operating instructions on the following pages).
TO SCREW:
Push the crown ALL THE WAY IN (towards the
watch) THEN begin to turn clockwise until it is
securely screwed down.
0
1
HOW TO SET THE TIME
1. Unscrew the crown and pull it out to position [3]-(2nd click).
2. Turn the crown clockwise to set the correct time.
3. Push the crown in then screw it securely.
* Take a.m./p.m. into consideration when
setting the hour and minute hands to the
desired time.
* Always be certain that your crown is
SECURELY SCREWED; this will prevent
moisture from entering in.
0
23
0
2 3
