Balluff BNI IOL-302-000-Z026 Bedienungsanleitung

BNI IOL-302-000-

Z026

BNI IOL-302-S01-

Z026

User’s G

uide

Balluff Network Interface / IO-Link BNI IOL-302-xxx-Z026

www.balluff.com

1 Notes for the user

1.1

About this guide 2

1.2

Structure of the guide 2

1.3

Typographical conventions 2

1.3.1

Enumerations 2

3.2

Actions 2

1.3.3

Syntax 2

1.3.4

Cross references 2

Symbols 2

Abbreviations 2

2 Safety

2.1

Intended use 3

2.2

General safety notes 3

2.3

Meaning of the warnings 3

3 Getting started

3.1

Connection overview 4

Mechanical connection 5

3.3

Electrical connection 5

3.3

IO-Link interface 5

3.3

Supply voltage connection 5

3.3

Sensor / Actuator interface 6

4 IO-Link interface

4.1

IO-Link data 7

4.2

Process data / Input data 7

4.3

Process data / Output data 8

4.4

Parameter data / Request data 9

4.5

Error 11

4.6

Events 11

5 Technical data

5.1

Dimensions 12

5.2

Mechanical data 12

5.3

Electrical data 12

5.4

Operating conditions 12

5.5

LED indicators 13

Appendix

Product ordering code 14

Order information 14

Scope of delivery 14

Balluff Network Interface / IO-Link BNI IOL-302-xxx-Z026

www.balluff.com

1Notes for the user

1.1

About this guide

This guide describes the Balluff Network Interface BNI IOL-302-xxx-Z026 for the application as

peripheral in-/ output module to establish connection of binary standard sensors or actuators. Hereby

it is about an IO-Link device which communicates by means of IO-Link protocol with the

superordinate IO-Link master assembly.

1.2

Structure of the

guide The guide is organized so that the sections build on one another:

Section 2: Basic safety information.

Section 3: The main steps for installing the device.

Section 4: IO-Link, parameter and process data for the device.´

Section 5: Technical data for the device.

1.3

Typographical

conventions The following typographical conventions are used in this guide.

1.3.1

Enumerations

Enumerations are shown in list form with bullet points:

- Entry 1,

- Entry 2.

1.3.2

Actions

Action instructions are indicated by a preceding triangle. The result of an action is indicated

by an arrow.

Action instruction 1.

⇒Action result.

Action instruction 2.

1.3.3 Syntax

Numbers:

−Decimal numbers are shown without additional indicators (e.g. 123),

−Hexadecimal numbers are shown with the additional indicator

hex

(e.g. 00

hex

1.3.4 Cross references Cross references indicate where additional information on the topic can be found (see section 5

„Technical data”).

1.4

Symbol

Note, Tipp

This symbol indicates general notes.

Note!

This symbol indicates a security notice which must be observed.

1.5

breviations

BNI Balluff Network Interface

I/O port Standard input / output port

DPP Direct Parameter Page

IOL IO-Link

EMC Electromagnetic Compatibility

FE Function earth

SPDU Service Protocol Data Unit

Balluff Network Interface / IO-Link BNI IOL-302-xxx-Z026

www.balluff.com

2Safety

2.1

Intended use

This guide describes the Balluff Network Interface BNI IOL-302-xxx-Z026 for the application as

peripheral in-/ output module to establish connection of binary standard sensors or actuators. Hereby

it is about an IO-Link device which communicates by means of IO-Link protocol with the

superordinate IO-Link master assembly.

2.2

General safety

notes Installation and start up

Installation and start up are to be performed only by trained specialists. Any damage resulting from

unauthorized manipulation or improper use voids the manufacturer’s guarantee and warranty.

The device complies with EMC Class A. Such equipment may generate RF noise. The operator must

take precautionary measures accordingly.

The device must be powered only using an approved power supply (see section 5 “Technical data”).

Only approved cable may be used.

Operating and testing

The operator is responsible for observing local prevailing safety regulations.

When defects and non-clearable faults occur in the device, take it out of service and secure against

unauthorized use.

Approved use in ensured only when the housing is fully installed.

2.3

Meaning of the

warnings Note!

The pictogram used with the word “Caution” warns against a possible hazardous situation

affecting the health of persons or resulting in equipment damage. Ignoring these warnings

can result in injury or equipment damage.

•Always observe the described measures for preventing this danger.

Balluff Network Interface / IO-Link BNI IOL-302-xxx-Z026

www.balluff.com

3Getting started

Connection

overview

Figure 3-1: Connection overview BNI IOL-302-xxx-Z013

1 Mounting hole

2 Label

3 Supply voltage connection

4 Status LED: communication / module

5 Standard I/O port 1

6 Standard I/O port 3

7 Standard I/O port 5

8 Standard I/O port 7

9 Mounting hole

10 Pin/Port LED: Signal status

11 Standard I/O port 6

12 Standard I/O port 4

13 Standard I/O port 2

14 Standard I/O port 0

15 Status LED: sensors/ actuators supply

16 Status LED: module supply

17 IO-Link interface

18 Ground connection

Balluff Network Interface / IO-Link BNI IOL-302-xxx-Z026

www.balluff.com

3 Getting started

Mechanical

connection The BNI IOL-302-xxx-Z026 modules are attached by using 2 M6 screws and 2 spacers.

3.3

Electrical

connection

The BNI IOL-302-xxx-Z026 modules require two separate supply voltage connection. The supply

voltage of the module is provided through the IO-Link interface by the host IO-Link Master. The

power for the sensors and actuators is provided by the 7/8” connector.

3.3.1 IO-Link interface

IO-Link (M12, A coded, male)

Pin Function

1 Power supply controller, +24V, max 1,1A

2 not connected

3 GND, reference potential

4 C/Q, IO-Link data transmission channel

5 FE, function earth

Connecting the

hub Connection protection ground to FE terminal, if present.

Connect sensor/actuator supply.

Connect the incoming IO-Link line to the hub.

Note:

A standard 3 wire sensor cable is used for connection to the host IO-Link master.

Function earth

Figure 3-2: FE connection

Note:

The FE connection from the housing to the machine must be low-impedance and kept as

short as possible.

Module versions

Hub versions Digital Port

BNI IOL-302-000-Z026 16 In-/ Outputs, configurable

BNI IOL-302-S01-Z026 16 In-/ Outputs, configurable, with single

channel monitoring

3.3.2. Supply voltage Power In (7/8“, male)

connection

Pin Function

1 Power supply actuators, +24V

2 Power supply sensors, +24V

3 GND, Reference potential sensor supply

4 GND, Reference potential actuator supply

Balluff Network Interface / IO-Link BNI IOL-302-xxx-Z026

www.balluff.com

3 Getting started

3.3.3 Sensor-Actuator Standard I/O port (M12, A coded, female)

interface

Pin Function

1 +24V, 300mA

2 Input 2 / Output 2

3 GND

4 Input 1 / Output 1

5 FE

Note!

For the digital sensor inputs follow the input guideline per EN61131-2, type 2.

Note!

Outputs: Maximum 2A per output.

Total current of actuator supply is maximum 9A

Note!

Unused I/O port socket must be fitted with cover cap to ensure IP67 protection rating.

Balluff Network Interface / IO-Link BNI IOL-302-xxx-Z026

www.balluff.com

4 IO-Link interface

4.1

Link d

BNI IOL-302-000-Z026

Data transmission rate COM2 (38,4 kBaud)

Frame type 1

Minimal cycle time 3 ms

Process data cycle time 12 ms, 3 ms, at minimal cycle time

Process data length 2 Bytes input, 2 Bytes output

BNI IOL-302-S01-Z026

Data transmission rate COM2 (38,4 kBaud)

Frame type 1

Minimal cycle time 3 ms

Process data cycle time 24 ms, at minimal cycle time

Process data length 6 Bytes input, 2 Bytes output

4.2

Proc

ess data

Input data

BNI IOL

000

Byte 0 Byte 1

7 6 7 6 7 6 7 6 7 6 7 6 7 6 7 6

Input 7.0

Input 6.0

Input 5.0

Input 4.0

Input 3.0

Input 2.0

Input 1.0

Input 0.0

Input 7.1

Input 6.1

Input 5.1

Input 4.1

Input 3.1

Input 2.1

Input 1.1

input 0.1

BNI IOL

302

S01

Byte 0 Byte 1

7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0

Input 7.0

input 6.0

Input 5.0

Input 4.0

Input 3.0

Input 2.0

Input 1.0

Input 0.0

Input 7.1

Input 6.1

Input 5.1

Input 4.1

Input 3.1

Input 2.1

Input 1.1

Input 0.1

Byte 2 Byte 3

7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0

Short circuit port 7

Short circuit port 6

Short circuit port 5

Short circuit port 4

Short circuit port 3

Short circuit port 2

Short circuit port 1

Short circuit port 0

Under voltage UA

Untder voltage US2

Under voltage US1

Signal port (x):

x.0: Pin 4,

X.1: Pin 2

Signal port (x):

x.0: Pin 4,

X.1: Pin 2

Short circuit on

port x between

Pin 1 and Pin 3

Short circuit Port x = 1

where

x=0...7

Balluff Network Interface / IO-Link BNI IOL-302-xxx-Z026

www.balluff.com

4 IO-Link interface

Byte 4 Byte 5

7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0

Short circuit Port 7.0

Short circuit Port 6.0

Short circuit Port 5.0

Short circuit Port 4.0

Short circuit Port 3.0

Short circuit Port 2.0

Short circuit Port 1.0

Short circuit Port 0.0

Short circuit Port 7.1

Short circuit Port 6.1

Short circuit Port 5.1

Short circuit Port 4.1

Short circuit Port 3.1

Short circuit Port 2.1

Short circuit Port 1.1

Short circuit Port 0.1

Note:

Actuator short circuit: overload or short circuit of the output signal against 0V.

4.3 P

roc

ess

data

Output data

BNI IOL

302

xxx

Z026

Byte 0 Byte 1

7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0

Output 7.0

Output 6.0

Output 5.0

Output 4.0

Output 3.0

Output 2.0

Output 1.0

Output 0.0

Output 7.1

Output 6.1

Output 5.1

Output 4.1

Output 3.1

Output 2.1

Output 1.1

Output 0.1

Signal port (x):

x.0: Pin 4,

X.1: Pin 2

Actuator short circuit at

Signal port on port x

Short circuit port x.0=Pin4

Short circuit port x.1=Pin2

Balluff Network Interface / IO-Link BNI IOL-302-xxx-Z026

www.balluff.com

4 IO-Link interface

4.4 Parameter

data

Request data

DPP SPDU Object name Length Range Default value

Index Index Sub-

Index

Identification data

0x07

Vendor ID 2 Byte

read only

0x0378

0x08

0x09

Device ID 3 Byte 0x05070F

0x05070E

0x0A

0x0B

0x10 0 Vendor name 7 Byte BALLUFF

0x11 0 Vendor text 15 Byte www.balluff.com

0x12 0 Product name 20 Byte BNI IOL-302-000-Z026

BNI IOL-302-S01-Z026

0x13 0 Product ID 7 Byte BNI 0050

BNI 0051

0x14 0 Product text 22 Byte Sensor/Actor hub metal

0x16 0 Hardware Revision 1 Byte

0x17 0 Firmware Revision 23 Byte

Parameter data

0x40 0

1-16 Inversion 2 Byte 0-FFFF 0x0000

0x42 0

1-8 Fault state Pin4 2 Byte 0-FFFF 0x0000

0x43 0

1-8 Fault state Pin2 2 Byte

0-FFFF 0x0000

0x44 0

1-16 Power monitoring 2 Byte 0-FFFF -

0x45 0

1-16 Actuator short circuit 2Byte 0-FFFF -

BNI IOL-302-xxx-Z026

Inversion

Byte 0

Byte 1

Inversion 7.0

Inversion 6.0

Inversion 5.0

Inversion 4.0

Inversion 3.0

Inversion 2.0

Inversion 1.0

Inversion 0.0

Inversion 7.1

Inversion 6.1

Inversion 5.1

Inversion 4.1

Inversion 3.1

Inversion 2.1

Inversion 1.1

Inversion 0.1

Subindex

16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

Inversion port (x):

x.0: Pin 4,

x.1: Pin 2

Inversion

0: normal

1: inverted

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Balluff Aufnahmegeräte Handbücher

Balluff

Balluff PROFINET BNI PNT-508-055-P067 Bedienungsanleitung

Balluff

Balluff BNI PNT-565-W01-K079 Bedienungsanleitung

Balluff

Balluff BNI DNT-104-000-Z004 Beilage

Balluff

Balluff BNI IOL-314-S52-P012 Bedienungsanleitung

Balluff

Balluff BNI IOL-719-002-Z012-C10 Bedienungsanleitung

Balluff

Balluff BNI IOW-560-W01-K022 Bedienungsanleitung

Balluff

Balluff BNI IOL-106-000-Z012 Bedienungsanleitung

Balluff

Balluff BNI IOL-717-002-E023 Bedienungsanleitung

Beliebte Aufnahmegeräte Handbücher anderer Marken

KV2 Audio

KV2 Audio 500 Series Bedienungsanleitung

Robotics Technologies

Robotics Technologies microBus-Cam II Bedienungsanleitung

Seca

Seca 460 Bedienungsanleitung

Cognex

Cognex MVS-8000 Series Bedienungsanleitung

Mect

Mect MPNC006 Series Bedienungsanleitung

Bad Caf

Bad Caf THE LEASH Bedienungsanleitung

Strymon

Strymon NIGHTSKY Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Bedienungsanleitung

Tews Technologies

Tews Technologies TPMC465 Bedienungsanleitung

Honeywell

Honeywell Excel 50 Bedienungsanleitung

SeaLevel

SeaLevel COMM+8.LPCI Bedienungsanleitung

Arturia

Arturia AUDIOFUSE STUDIO Bedienungsanleitung

Rukra

Rukra RK-1240 Bedienungsanleitung

Samson

Samson SCOM Bedienungsanleitung

Dynacord

Dynacord DPS260 Bedienungsanleitung

Pyle Pro

Pyle Pro PSS8 Bedienungsanleitung

Nice

Nice Core Bedienungsanleitung

RF-System

RF-System TinyGate Gebrauchs- und Pflegehandbuch