Baltech ACCESS200 Bedienungsanleitung

BALTECH AG

Lilienthalstrass<e 27

85399 Hallbergmoos

Germany

Phone: +49 (811) 99 88 1-0

Fax: +49 (811) 99 88 1-11

Mail: [email protected]

Website: www.baltech.de

v1.0

ACCESS200 installation guide

Here’s a quick overview of the steps to install an ACCESS200 reader. More detailed

instructions are available online –just follow the links or QR codes below.

1. Install readers

Mounting guidelines:

•Fix the base part to a single gang box or directly to the mounting surface.

Use 3 mm diameter countersunk head screws. Heads must not stand out more than

1 mm from the base surface.

•When using stranded wires, make sure there are no wires outside the cages of the

pluggable cage clamp.

•To avoid rain interference, make sure outdoor keypad readers are mounted upright or

at a protected spot. Otherwise, ensure they’re wiped off if malfunctioning.

Connector and pins:

Pigtail cable connection / Molex Pico-SPOX (outdoor/potted

versions) stranded, AWG28, power Red&Black AWG 24

Color

Connector pin #

Signal/funct.

White/Orange

WIE_D0/RS485A

Orange

WIE_D1/RS485B

White/Green

LEDGN

Green

LEDRD

Red/White

USB Data -

Black/White

USB Data +

Red

+VIN

Black

GND

White/Blue

GND

J8 Pluggable cage clamp

(indoor versions)

Pin #

Signal/funct.

J8-1

GND

J8-2

+Vin

J8-3

WIE_D0/RS485A

J8-4

WIE_D1/RS485B

J8-5

LEDGN

J8-6

LEDRD

J8-7

REL_WC

J8-8

REL_NO

BALTECH AG

Lilienthalstrass<e 27

85399 Hallbergmoos

Germany

Phone: +49 (811) 99 88 1-0

Fax: +49 (811) 99 88 1-11

Mail: [email protected]

Website: www.baltech.de

v1.0

Blue

REL_WC

White/Brown

REL_NO

Brown

REL_NC

J8-9

REL_NC

2. Set bus address

When using a bus protocol (e.g. OSDP), set a bus address for each reader: Place a BALTECH

AdrCard in front of the reader and wait for the signal indicating the desired address.

Note: If the readers are already configured, make sure the reader housing (i.e. the tamper

switch) is open when setting the bus address.

Learn more here:

docs.baltech.de/bus-address

or scan the QR code.

3. OPTIONAL: Test reader functionality

By default, the readers will now read any card’s UID (serial number) and transmit it to the

host system. You can make use of this behavior to check if the readers are up and running:

Use a test card and configure the host system temporarily to accept this card’s UID.

4. Deploy configuration

If you have a BEC file, deploy it via USB using our Windows tool BALTECH Uploader. If you

have a BALTECH ConfigCard, present it to the reader and wait for yellow and green signals.

Learn more here:

docs.baltech.de/deploy

or scan the QR code.

BALTECH AG

Lilienthalstrass<e 27

85399 Hallbergmoos

Germany

Phone: +49 (811) 99 88 1-0

Fax: +49 (811) 99 88 1-11

Mail: [email protected]

Website: www.baltech.de

v1.0

5. Test configuration

Use a test project card to test the configured readers. Make sure the host system is now

configured for live operations. If something doesn't work, get back to your project

manager to troubleshoot the configuration.

Support

Got stuck? We’re happy to help:

+49 811-99881-0 | support@baltech.de

Inhaltsverzeichnis

Andere Baltech Kartenleser Handbücher

Baltech

Baltech ACCESS100 Bedienungsanleitung

Beliebte Kartenleser Handbücher anderer Marken

Lindy

Lindy 43185 Bedienungsanleitung

Lindy

Lindy 43185 Bedienungsanleitung

ViziT

ViziT RD-4F Bedienungsanleitung

Jinmuyu Electronics

Jinmuyu Electronics MR811 Series Bedienungsanleitung

AVID ID

AVID ID AVID1043 Bedienungsanleitung

Conrad

Conrad PCMCIA Bedienungsanleitung

Rosslare

Rosslare DR-6255 Bedienungsanleitung

Lindy

Lindy 51541 Bedienungsanleitung

Diapro T?bbi Ürünler

Diapro T?bbi Ürünler Across System Bedienungsanleitung

Johnson Controls

Johnson Controls Kantech tyco ioSmart Bedienungsanleitung

ACS

ACS ACR122L Bedienungsanleitung

Secukey

Secukey S2-MF Bedienungsanleitung

Elecom

Elecom MR-SMC07 series Bedienungsanleitung

Alien

Alien ALR-9800 Bedienungsanleitung

ACS

ACS ACR310 Bedienungsanleitung

Datamars

Datamars R-IN1300 MID Bedienungsanleitung

Alarm Lock

Alarm Lock AL-PRE2 Bedienungsanleitung

xpr

xpr B100PROX-AH Benutzerhandbuch