B&B Electronics UHR304 Bedienungsanleitung

P#8739_R002_ULINX_UHR204_304_0912qsg

Included Items

Installation

LED Indicators

Quick Start Guide

Model UHR204

Model UHR304

USB to Serial Device

One Meter USB Cable

CD ROM with Drivers

This Quick Start Guide

4 port industrial USB hub

Two meter USB cable

Panel mount adapters

DIN rail mount adapter

This quick start guide

Industrial 4 Port USB Hubs

Models UHR204 & UHR304

1. Unpack the USB hub from the shipping container.

Verify that all included items are present.

Note: There is no software CD for this product. It

will install as a Generic USB Hub and does not

require additional drivers.

2. Mount the product via the included DIN clip or included

Panel Mount adapter kit. See the Mounting section for

more information.

3. Using the included USB cable, connect one end of the

cable to the Host PC or upstream USB hub. Plug the

other end of the cable into the USB hub via the port

marked USB Host.

Note: If the USB upstream device is capable of

supplying power to the Hub, then the Bus Power

LED will light. When Local (external) power is

applied to the terminal block or the barrel jack the

Local Power LED will light. The Local Power LED

will light only when power is applied externally and

an active upstream connection is made (normally

needs 500mA from host minimum).

4. Ground the hub to earth ground using the green ground

screw.

5. Add power via the terminal block or barrel jack if one of

the following instances will occur:

Power Scenario 1

The USB hub is connected to an upstream port that

does not offer full power out. (Example: connecting the

B&B hub into another hub that is not externally powered

Power Scenario 2

The USB Hub will have another USB hub connected to

one of its downstream ports.

Power Scenario 3

The USB Hub will have bus powered devices plugged

into it. (Example: using a B&B USB to serial device that

uses the USB bus for power.)

LED

Type

State

Description

Bus

Power

Product is plugged into an active host device

and local power is not applied (the product

can supply up to 100mA per downstream

power)

Off

Product has local power applied or no power

present

Local

Power

Local power is applied and an active host

connection is made (the product is capable

of supplying 500mA per downstream port)

Off

Product is Bus powered or no power present

Port

LED's

Port is Active and ready for use

Off

Port has a fault - power may need to be

cycled

LED

Type

State

Description

Power

Power is applied (the product is capable of

supplying 500mA per downstream port)

Off

Power is not applied

Port

LED's

Port is Active and ready for use

Off

Port has a fault - power may need to be

cycled

P#8739_R002_ULINX_UHR204_304_0912qsg

Power

Mounting

Dimensions

USB bus powered option (UHR204 only)

The hub can be USB bus powered. When USB bus

power is used the amount of power available to each

of the USB downstream ports is limited to 100mA

maximum per port.

External power option (UHR204 and UHR304)

10 to 30VDC, 16 watts maximum, Class 2 Input

Terminal Block or Locking Power Jack

Note 1: When external power is used the hub will provide

up to 500mA per downstream port.

Note 2: The terminal block input and the locking barrel jack

are wired so that both can be powered at the same

time. This is a great option to achieve power

redundancy.

DIN Rail Mounting

1. To install locate the included DIN rail mount kit which

includes the bracket and 3 installation screws.

Note: The DIN rail mounting bracket can only be

installed on the back side of the hub.

2. Find the 3 mounting holes located on the back side of

the hub and install the mounting bracket with the flat

surface facing the back of the hub with the included

mounting screws.

3. The product is now ready to be mounted on a piece

of DIN rail.

Panel Mounting

1. To install locate the included panel mount kit which

includes two bracket pieces and 4 installation screws

(2 screws per bracket).

Note: The Panel Mount Brackets can be mounted

to either side of the product and allows mounting

Up, Down, Forward and Back.

2. Using the 4 screws (2 per bracket) attach the

brackets to the hub. The shorter side of the bracket

in which the holes are close together is the side that

will mount to the hub. The bracket when installed

correctly will form an L shape with the side of the

hub.

3. Once the brackets are installed the product is ready

to be mounted.

Power input: 10 to 30 VDC, 16W maximum, Class 2 Input

Surrounding Air Ambient Temperature: -40 to 80° C

Dieses Handbuch passt für folgende Modelle

Andere B&B Electronics Schalten Handbücher

B&B Electronics

B&B Electronics 232BSS4 Bedienungsanleitung

B&B Electronics

B&B Electronics ICE-104P Betriebsanleitung

B&B Electronics

B&B Electronics 232BSS4 Bedienungsanleitung

B&B Electronics

B&B Electronics ETHUB16 Bedienungsanleitung

B&B Electronics

B&B Electronics 232MSS2 Bedienungsanleitung

B&B Electronics

B&B Electronics 232BSS4 Bedienungsanleitung

B&B Electronics

B&B Electronics EIR618-2SFP-T Bedienungsanleitung

B&B Electronics

B&B Electronics 8 PORT SMART SWITCH CE 232D4SS8 Bedienungsanleitung

B&B Electronics

B&B Electronics 485DSS Bedienungsanleitung

B&B Electronics

B&B Electronics 232XSSD4 Bedienungsanleitung

B&B Electronics

B&B Electronics Elinx EIR510-2MC-T Bedienungsanleitung

B&B Electronics

B&B Electronics 232XS5 Bedienungsanleitung

B&B Electronics

B&B Electronics Elinx EIRP410-2SFP-T Bedienungsanleitung

B&B Electronics

B&B Electronics Elinx EIRHP305-T Bedienungsanleitung

B&B Electronics

B&B Electronics EIR405-SFP-T Bedienungsanleitung

B&B Electronics

B&B Electronics EIR610-3SFP-T Technische Daten

B&B Electronics

B&B Electronics Elinx EIR508-2MC-T Bedienungsanleitung

B&B Electronics

B&B Electronics 232SS2 Bedienungsanleitung

B&B Electronics

B&B Electronics EIR505-xx Bedienungsanleitung

B&B Electronics

B&B Electronics e-Linx EIRP610-2SFP-T Bedienungsanleitung

B&B Electronics

B&B Electronics 485DSS Bedienungsanleitung

B&B Electronics

B&B Electronics 232XS5 Bedienungsanleitung

B&B Electronics

B&B Electronics Elinx EIRP305-T Bedienungsanleitung

B&B Electronics

B&B Electronics Elinx EIR418-2SFP-T Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung