Bang & Olufsen BeoSystem 3 Bedienungsanleitung

BeoSystem 3

Guide

Cautions

– Make sure that the product is set up, placed and

connected in accordance with the instructions

in this Guide.

– Place your product on a rm and stable surface.

To prevent injury, use Bang & Olufsen approved

stands and wall brackets only!

– Do not place any items on top of your product.

– Do not subject the product to high humidity, rain

or sources of heat.

– The product is developed for indoor use in dry,

domestic environments only. Use within a

temperature range of 10–35°C (50–95°F), and

at an altitude of no more than 1500 m (5000 ft).

– Do not place the TV in direct sunlight, as this

may reduce the sensitivity of the remote control

receiver.

– Leave enough space around the product for

adequate ventilation.

– Do not connect any of the products in your

system to the mains, until you have connected

all the cables.

– Do not attempt to open the product. Leave

such operations to qualied service personnel.

– The product can only be switched off completely

by disconnecting it from the wall socket.

This Guide contains information about the daily use of your

Bang & Olufsen product and about connecting and operating

external equipment. We expect your retailer to deliver, install and

set up your product.

On the Bang & Olufsen website, www.bang-olufsen.com, you can

nd further information and relevant FAQs about your product.

The needs of the user are considered carefully when designing

and developing Bang & Olufsen products. Therefore, please take

the time to tell us about your experience with your product.

To contact us, visit our website on …

www.bang-olufsen.com

or write to: Bang & Olufsen a/s

BeoCare

Peter Bangs Vej 15

DK–7600 Struer

or fax: Bang & Olufsen

BeoCare

+45 9785 3911 (fax)

Dear Customer

3500242 0903

Technical specications, features and the use

thereof are subject to change without notice.

Contents

4Watch television

6Teletext

9BeoLink

19 Advanced use

33 Installation – setup

STOP

PLAY

BACK

Living Room

TV V.MEM RADIO

DTV N.MUSIC N.RADIO

PC DVD CD

TV LIGHT RADIO

DTV DVD CD

V MEM RECORD A MEM

789

456

TEXT 0MENU

123

LIST EXIT

STOP

How to use your remote control

You can operate your television with

Beo5 or Beo4. The instructions in this

Guide are mainly based on Beo5.

Useful hints

1*About buttons

2*Coloured buttons

Actual zone

Soft buttons

Light grey buttons indicate that you have to press a text in the display. Dark grey buttons

indicate that you have to press a hard button.

Press the wheel next to the colour to activate a coloured button.

Indicates the actual zone as it was named during the setup process.

Depending on the activated source, different soft buttons appear on the screen. Touch the

screen to activate the function.

3*Marked buttons can be recongured during the setup process. See p. 37.

My reconguration:

Start playback

Step through channels or recordings

Hold for continuous step

Step through screen menus

Standby

Search backwards or forwards

Recordings

Back up through menus or press once to pause

playback and twice to stop

Soft button, touch screen to select*1

Switch on a source or select a function

Press centre button to accept and store settings

Turn to adjust volume

To mute, turn quickly counter-clockwise

Bring up SCENE buttons, such as Zones or

Speaker

Press again to return

Select colour specic functions*2

Press volume wheel next to the colour

Bring up digits to select channel or recording

Press again to return

Back up through Beo5 displays

Select colour specic functions

Adjust volume

To mute, press the middle of the button

The Beo4 display shows you the activated source or function

Accept and store settings and start playback

Search backwards or forwards or move in menus

Back up through menus or press once to pause playback and

twice to stop

Switch on a connected video recorder

Standby

Select channels and enter information in on-screen menus

Step through channels or move in menus

Hold for continuous step

Display extra ‘buttons’ on the Beo4

Press repeatedly to change ‘buttons’

Switch on the TV*3

Exit menus completely

Switch on teletext

Bring up the main menu of the active source

Exit menus

NOTE! For general information about

remote control operation, see the Guide

enclosed with your remote control.

Beo5 operation Beo4 operation

STOP

V MEM

0 – 9

LIST

PL AY

STOP

BACK

TEXT

EXIT

DTV

Watch television • Teletext Easy use

Watch movies and listen to different sources, such as a connected

set-top box or a music centre.

Information about the selected source is

shown at the top of the screen. On-screen

menus allow you to adjust settings.

Display and menus

Introduction

Show menuSelect TV’s

zone

Switch on TV

When a menu is on the screen, you can

move between menu options, reveal

settings or enter data.

Navigate in menus

Select option/

setting

Enter data Bring up sub-

menu/store

setting

Select option Exit menus*4

Important – for more information: www.bang-olufsen.com

Remote control The instructions in this Guide are mainly based on the Beo5 remote

control, but you can also operate the TV with Beo4. On the fold-out

page in this Guide, you will nd an overview of the buttons on Beo5

and Beo4. For general information about remote control operation,

see the Guide enclosed with your remote control.

4*NOTE! Press STOP to back up through

menus.

… TV Menu

0–9 BACK

TV SETUP

TUNING

PLAY TIMER

OPTIONS

STAND POSITIONS

select

Menu name

Menu options

Information eld

Watch television

Choose a TV channel by its number or switch to another

channel or source. Adjust the sound volume and change the

sound type or language.

Useful hints

Automatic Colour Management Automatic Colour Management automatically compensates for colour changes on the

screen for every 100 hours of use approximately. Do not switch off the system or disconnect

it from the mains during the calibration.

Beo5 operation

Switch on the TV

Switch off the TV

Activate the TV source to use these

functions

Automatic colour calibration may start

automatically.

Adjust the volume

See second source

Divide the screen to watch two sources at the

same time.

Bring up a channel list

Select a TV channel

Record here and now on a recorder

While recording on a connected recorder you can

also watch another recording, source, or TV

channel.

TV CHANNEL LIST

CNN 1

… 2

DISCOVER 3

CWNBC 4

BBCWORLD 5

… 6

… 7

… 8

SUPER CH 9

… 10

CRIME TV 11

CINEMA 12

… 13

MOVIE NW 14

… 15

… 16

… 17

… 18

more select

Channel name

Channel number

Indicates more channels

Second source You can bring up two video sources. With Swap you can make the left and right pictures

switch places. With BACK you leave the function and go to the source on the left. You

can also just select the source you wish to go to. See also p. 40 for information about

HDMI sources.

Beo4 operation

Adjust volume. To mute, turn quickly

counter-clockwise

Adjust

volume

To mute, press in the middle

of the button

Select

P-AND-P

Press Swap picturesSelect

source

Select source

Press

PressPress

Hold for

channel list

Select channelSelect page Accept

Activate

numbers

Select Select

channel

or or

Select Select

channel

Hold to

activate

Select page or channel and

Bring back the sound by turning the

wheel either way.

Swap pictures

Select previous channel Previous

channel

Press

Start recording Stop recording Press twice to start Press twice to

stop

TV TV

0–9

0–9 0–9

P-and-P DVD Swap LIST DVD 0

Previous 0

Record Record RECORD STOP

STOPSTOP

Teletext

Operate teletext through the menu bar at the top of the

teletext page or the arrow buttons on your Beo5.

Glossary

Beo5 teletext point

1*Teletext service

MEMO pages

Large teletext

With the inner arrow buttons on Beo5 you can navigate in page references in a teletext page. Go to a page

referred to by pressing the centre button and back again by pressing BACK.

Each channel provides its own teletext service. Change easily between teletext pages of different channels.

Store a teletext page as a MEMO page to be able to access it quickly.

To enlarge the size of the teletext page, bring up teletext, move to ‘LARGE’ in the menu bar and press the

centre button repeatedly to switch between the upper and lower half of the page and normal page size.

Activate teletext to use these

functions

View a MEMO page

Create MEMO pages

Reveal hidden messages

Start teletext

Exit teletext

Stop subpages from turning

Delete a MEMO page

Leave the teletext function.

Change teletext service*1

Access teletext pages of other broadcasters.

… and the like.

Access the start page of teletext.

Nine MEMO pages are available for each channel’s

teletext service.*2

Move to pages

Access teletext pages you wish to see.

Beo5 operation

‘MEMO’ is only available if you have stored MEMO

pages.

PAGE CHANNEL LARGE HALT REC SETUP

P100 BBC S100 Wed 13 Oct 12:39:34

Change broadcaster

Actual page

Stop subpage turning

The arrow indicates that more options are available.

Reveal hidden text on ‘REVEAL’ and make settings

on ‘SETUP’

2*Teletext subtitles

Dual screen

If you would like available teletext subtitles to appear

automatically for a particular channel, store the teletext subtitles

page as MEMO page 9.

When teletext is activated, pressing Text swaps between dual

screen and full screen mode.

NOTE! If your TV is linked via a Master Link

cable to another TV, stored MEMO pages

are not shared among these TVs. MEMO

pages must be stored manually on each

linked TV.

Move to ‘CHANNEL’ or

‘MEMO’

Stop turning Stop turning

Move to

‘REVEAL’

Move to ‘REVEAL’

Move to

‘SETUP’

Accept Accept

PressPress repeatedly to change screen mode

Press

Move to ‘CHANNEL’ or

‘MEMO’ then ‘CHANNEL’

Bring up

channel list

Move to

‘PAGE’

Select page Select page

or or

Select page Move to ‘PAGE’

and select

Move to ‘CHANNEL’ or

‘MEMO’ then

‘CHAN NEL’

Move to

‘HALT’

Move to

‘SETUP’

Accept then

store

Select MEMO

page

Press, select

channel and

Go to index pages (100,

200, 300 …) Index

pages

Select

channel

Press Select subpage

Restart

turning

Select subpage and restart

turning

AcceptSelect page Store

current

page

Move to

‘BACK’

Accept Select page

Move to ‘CHANNEL’ or

‘MEMO’

Select MEMO page

Move to

‘SETUP’

Accept Select

MEMO

page

Press Delete Move to

‘SETUP’

Press Select

page

Press

twice

Beo4 operation

Text TEXT

0–9 0–9

STOP 0–9 STOP 0–9

0–9

BACK EXIT

0–9

Andere Handbücher für BeoSystem 3

Inhaltsverzeichnis

Andere Bang & Olufsen Computerhardware Handbücher

Bang & Olufsen

Bang & Olufsen BeoSystem 1 Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung